The low-difficulty "Italian chandelier" is similar to the "suspension bridge" in Edo's 48 hands, which is more practical and easy to operate, and it is also recognized as the "classic Italian chandelier style" by the external network.

material preparation

Materials should be prepared before installing the chandelier. Tools such as wood strips, plates, hardware fittings, screws and hammers are indispensable. Only when these tools are prepared can they work smoothly. In addition, we also need to measure the size of the chandelier and determine the specific installation location.

Drilling construction

Next, plug in the power supply of the drilling tool, drill holes in the gypsum board, then bury the hardware fittings or wooden strips inside, and fill the nearby holes with adhesive or cement slurry, and then dry them before construction.

Fixed fittings

When installing the chandelier, it is necessary to fix iron pieces or wooden strips. If it is not fixed properly, it will have a certain impact on the life of the chandelier.

Chandelier threading

The next step is to connect the wire to the wick through the boom. If the chandelier is equipped with a switch, pay attention to the direction of the wire when threading.

Pendant lamp installation

It is best to install the lampshade and lamp arm of the chandelier. It can be installed with tools such as screwdriver and hammer. After the installation, you can try to power on and make fine adjustments according to the actual situation.