1. Click Next to start Dahua Video Recorder and enter the startup wizard.
2. Enter the user name and password of the video recorder, and then click Login.
3. Enter the general settings, check whether the time is not allowed to be modified, and click Save. If the time is normal, you can directly click Next to skip.
4. When entering the network settings, remove the "√" in front of dhcp. Without automatically obtaining the ip, you can fix the ip to192.168.1.9 (as shown in the figure below) and click Next directly.
5. Click on the device search. If the device is found, the connection is normal. If you can't find it, please check whether the video recorder is on the same network segment as the camera. Is the network cable connected correctly?
6. Select the searched camera ip and click Add below.
7. After adding the camera successfully, the ip of the camera will appear in the following list, and the connection status is
(small green circle). show
(small red circle) means that it is not good, just add it again.
8. For devices added manually, click Add Manually directly.
9. Manually add the number of channels to be added by the selected camera, change the manufacturer's protocol to onvif protocol, manually enter the ip address of the camera modified before, then change the http port number to 80 or 8899, and click OK to save.
10. Successfully added the camera manually.
1 1. Set the recording mode, and click Finish to save all the added surveillance cameras.
Share: