Start NFS server.
Click "output"
Click "Edit Output Table File"
(The following table * * * enjoys the F partition of the computer,192.168.1.6 refers to the ip address assigned to the HD network player. Therefore, when setting up the router, ip addresses should not be automatically assigned, but should be bound to the MAC of the device)
# Export sample
F:\- read-only192.168.1.6
Click Save, then click Restart Server, click Restart All Services in the Start menu-haneWIN software, and then import the edited output table file. After NFS software is set, it cannot be used directly, and a system firewall needs to be set.
WIN7 firewall settings enter the control panel, system security, windows firewall, advanced settings and inbound rules, then right-click the port, specific local port and TCP, and enter the port number:11,1000. For the example that comes with WIN7 system, pause is wrong) Allow Connection-Select all profiles "Enter rule name (user-defined) after next" and click Finish. Tip: After setting TCP rules, return to the interface of adding specific local port again, select "UDP", and then repeat the following steps to establish UDP communication rules. The port number is consistent with the TCP communication rules.
Exit after refreshing, and you can access NFS*** through the player.
Open the player-select file management
Click to enter "File Management"-select NFS devices.
-Select Auto Scan (sometimes it takes multiple scans to find the device).
Or select "shotcut" and enter the address:192.168.1.2: f/ (192.168.1.2 refers to the ip address assigned by the computer.
After the retrieval is completed, the IP addresses of all computers with NFS servers in the same LAN are displayed, and the IP addresses of the computers to be accessed are selected.
After opening, select * * * Shared Disk-Open-Open * * * Shared Folder-Select Play.