Telecom Optical Cat has only one LAN, so it needs to set a router on the computer in the background first, and then plug the network cable into the LAN port of Optical Cat, and the other end can be connected to the WAN port of the router. The specific use method is as follows:
1. Disconnect the optical cat from the computer source, and plug the network cable into the LAN port of the router to connect with the computer.
2. Check the IP address and password marked on the back of the router.
3. Enter the IP address marked on the back of the router in the address bar of the computer browser, press Enter, enter the user name or password, and then click Login.
4. After entering the router background, click Routing Settings to enter.
5. Click Internet Settings in the settings interface that appears, and select Automatically obtain IP address and save it.
6. Click Wireless Settings again. In the setting interface, check to turn on the wireless function, enter the wireless network name and password, and click Save.
7. Click the LAN port settings again, enter the number segment different from Guang Zhi Cat IP address in the settings interface, and click Save.
8. Click FHCP server again. In the interface that appears, check Enable DHCP function and click Save.
9. At this time, insert the network cable into the WAN port of the router, and the other end can be connected to the LAN port of the optical cat to access the Internet.