1. Physical connection:
-First, connect the light cat to the power supply and make sure that the light cat's power switch is turned on.
-Connect the WAN port (usually yellow) of Guangmao to the optical fiber access point provided by the operator.
-If a wired network is required, connect the LAN port of the computer or router (usually blue) with the LAN port of Guangmao.
2. Network configuration:
-Open a browser and enter the default IP address of the light cat in the address bar. Generally 192. 168. 1 or192.168.0.1. If you are not sure, please refer to the user manual of Guang Mao.
-Enter the default user name and password of Light Cat to log in. Usually administrator/administrator or administrator/password. If you haven't changed the default password, you can look it up in the user manual.
-After entering the setting interface of the light cat, make corresponding configuration according to your own needs, such as setting the wireless network name (SSID) and password, opening the port for forwarding, and configuring the IP address.
-After the configuration is completed, remember to save the settings and restart the light cat.