Power safety experience 1

We have all heard of adjectives about electricity such as "electric tiger" and "electric tiger". For me who is engaged in power production, I really know the great danger of electricity. The danger of electricity is not like a tiger, but more fierce than a tiger! Therefore, for me engaged in power production, safety is really indispensable. Safety work is our criterion, and safety work is our life guarantee.

As a worker engaged in power maintenance, I have heard of too many accidents caused by power, and I have seen many around me. Electricity does bring us a lot of convenience, but at the same time, the harm caused by not paying attention to regulating the use of electricity is really just as great. A family in the city next to us was found unable to take the heater away because of irregular use when plugging in the heater in winter, and then short-circuited the line at home in time, and the electricity directly caught fire behind it. Because there was no time to put out the fire, the whole house was about to burn down. When we went to deal with it, the whole wall was already dark. The only thing to be thankful for is that there were no casualties. Of course, this is lucky. I've heard about it. I saw it on the news. The electrical switch of a family downstairs often trips automatically and loses power. He went to repair others, and the poorly protected equipment was directly connected. As a result, the whole person was carbonized by electricity This is really a cruel thing. This is the loss of two families. One family suddenly lost its pillar, and another family took the loss of life and needed huge compensation ... It is very sad, so in the process of power production, we must pay attention to power safety and never be careless.

After working in the power industry for so long, most of the power accidents I have heard or experienced are careless thoughts. Some people are indifferent to the danger of electricity, so they don't understand and pay attention to the safe use of electricity, which leads to power accidents. On the other hand, it is also the indifference of safety awareness, but it is mainly because we are engaged in power production, our minds are numb when we work in power, we don't do a good job in safety inspection, and we go to work directly without wearing safety protection measures, which leads to power safety accidents.

So, if you ask me what I have learned most about power production for so long, I will definitely answer without hesitation. I must have a deep understanding of power safety work, and I must put the safety work in place before I can start working. Wear protective equipment, and first check whether the main switch of electricity has been turned off. These are all things we can't ignore!

Power safety experience II

Safety in production is a major event involving the life safety of employees, and it is also related to the survival, development and stability of enterprises. In recent years, newspapers, television and other news media have reported the accidents in production safety in China's railways, coal mines and other industries with great losses, great influence and high frequency, which is frightening. By analyzing the deep-seated causes of accidents, it is not difficult to see that some cadres and workers have misunderstandings about safety production and management. Our company is an electric power construction enterprise, with a wide range of engineering points, frequent high-risk operations such as aerial work, crossover operation and welding operation, so safety production is more important for our high-risk industry. Combining with the actual safety work in engineering construction, it is undoubtedly an effective way to realize the good situation of "orderly and controllable" safety production by strengthening the responsibility of safety production at all levels, improving the safety production awareness and skills of all employees, implementing various rules and regulations and eliminating ideological misunderstandings.

Doing a good job in production safety is still treading on thin ice, and there must be no negligence or carelessness. As a safety manager or the first person in charge of unit safety, we must first eliminate the misunderstanding in our thinking and understanding.

The first is the misunderstanding of safety facilities.

With the rapid development of science and technology, the safety facilities and labor protection articles on the construction site are also high-tech, sophisticated and cutting-edge, and are widely used in production practice. As a result, some personnel or cadres engaged in safety management are blindly optimistic, thinking that as long as these "excellent equipment" are put into use, there will be no major safety problems in the future, and they will not pay attention to grasping the small and preventing the big in their work. This kind of paralysis is likely to lead to an accident.

The second is the misunderstanding of employee training.

Mainly because our company is an advanced unit of safety production, which has continuously realized safety production for more than 6000 days. Most employees have also been engaged in construction production for many years or have done many projects, and feel that there is no need to increase training. Moreover, there are few full-time and part-time safety management personnel, so Party A and the owner blindly pursue the progress of the construction period and have no time, strength and energy for in-depth training; In addition, the vast majority of new employees are graduates from junior colleges and technical schools, and they have received safety training from the training department in the company, so the training standards of the three-level education network have been lowered. Due to the lack of leadership attention and training, accidents are most likely to happen to employees who are unfamiliar with business knowledge and have little experience in on-site safety construction. Therefore, paying close attention to the education of workers' labor safety production is also a guarantee for effectively preventing safety accidents.

The third is the misunderstanding of individual safety managers or cadres.

We all know that "strictness is love and looseness is harm" when dealing with work safety. However, in practical work, individual safety managers or cadres have the idea of "three fears" about safety management: they are afraid of being responsible for their superiors, offending people for their subordinates, and suffering from hardships, resulting in serious formalism, humanism and bureaucracy, which leads to the "absence" of implementation and implementation.

Management can bring benefits, and safety can also bring benefits. Safety in production is a major event involving the safety of employees, as well as the survival, development and stability of enterprises. Safety in production needs a multi-pronged alarm.

First, firmly establish the people-oriented thinking.

No matter how advanced the safety facilities and machines are, they must be operated, controlled and maintained by people. The higher the content of science and technology, the higher the requirements for people's quality. Therefore, safety production must be people-oriented. Without a dedicated and skilled workforce, there is no basic guarantee for safe production.

To improve people's quality, the first thing is to improve ideological quality. To make the company "better and stronger" and create a first-class electric power construction enterprise, we need a high-quality cadre and staff team, maintain a good safety production situation, and also need to cultivate an excellent staff team. Guided by scientific theory, it is the fundamental way to effectively improve the political and ideological level of workers. Therefore, it is necessary to actively publicize the urgency and importance of doing a good job in safety production through various forms, firmly establish the idea of "safety first, prevention first", and treat safety work from the height of "xxxx" and ensuring the safety of employees; In addition to raising awareness ideologically and enhancing the sense of responsibility and mission, we should constantly enhance the workers' awareness of safety production and fundamentally mobilize the enthusiasm of workers to ensure safety. Only in this way can we grasp the safety production situation of our own unit and department. The second is to improve professional quality. For the professional training of the labor force, in addition to what should be known and must be known under normal circumstances, we should also increase the education and drills on the resilience under abnormal circumstances. In view of the present situation of safe production in engineering construction, advanced and forward-looking training is carried out to improve the ability of accident prevention.

The second is to enhance the sense of responsibility and crisis of cadres.

Practice has proved that the key to safety lies in leadership. In order to implement the responsibility mechanism of "whoever builds is responsible" and reverse some misunderstandings and unrealistic phenomena in cadres' understanding, it is necessary to implement strict assessment, change the result assessment into process assessment and form a dynamic assessment and evaluation mechanism. At the same time, it is necessary to formulate a sound assessment system, clarify the assessment objects, contents and procedures at different levels, and organically combine employee assessment and assessment methods to conduct integrated assessment. For those who have not completed the quantitative assessment task or have safety problems, there should be corresponding punishment system to enhance the sense of crisis and responsibility of cadres, promote the implementation of the responsibility system step by step, and realize the change from "I want to pay attention to safety" to "I want to pay attention to safety".

Third, actively explore the safety management mechanism and constantly innovate the safety management mode.

According to the situation and reality of engineering safety production, management methods and means should also be based on reality, and explore the corresponding management mechanism and effective methods. First of all, we must lay a solid foundation for safety, adhere to prevention first, and strictly investigate violations. Focus on putting an end to violations of discipline, focus on prevention, and check loopholes from the source. More importantly, it is necessary to establish a system and mechanism that can ensure safe production; Secondly, we must adhere to the responsibility system step by step and implement leadership responsibilities. It is necessary to scientifically define the responsibility system step by step, distinguish between leadership responsibility, hierarchical responsibility, post responsibility and professional and technical responsibility, so that their responsibilities are clear and individual, and ensure implementation; In addition, we should raise awareness and treat safety day correctly. Safety days is an index to measure the safety status of a unit. One factor, long safety days, does not mean that there are fewer problems. The key is to wake up the alarm and persevere.

The fourth is to carry out various safety activities with distinctive themes and rich contents, strive to create a good safety culture atmosphere, and jointly build a safety levee.

Combined with the "ankang cup" competition and the work of "one law and three certificates", we will vigorously carry out various safety competition activities with the theme of safety production, such as "knowledge competition for workers' safety production", "safety skills competition for workers", "putting forward reasonable suggestions" and "promoting the independent management of production by safety teams". At the same time, adhere to the good practices and methods of work safety, such as standing in class meetings before (after) class, and constructing "three exchanges and three inspections", constantly sum up experiences and lessons, keep pace with the times, be brave in innovation, make good use of various carriers and forms, do a good job in work safety and make new achievements.

The fifth is to adhere to the "eight in place" of safe production and civilized construction.

Namely: safety awareness, safety measures, technical disclosure, safety responsibility, safety education and training, safety management personnel, safety funds, safety inspection and implementation of rectification.

Safety management is a long-term and complex system engineering, which needs continuous exploration, consolidation and innovation, and strives to find a management path suitable for engineering construction safety and strong operability, always maintain a good and stable safety production situation, build a defense line, make unremitting efforts, and wake up the alarm bell, making new contributions to the long-term development of the company's safety production.

Power safety experience 3

Safety, I don't know how you understand the meaning of this word, but I know how important safety is to an electric worker. Power safety involves thousands of households in all walks of life, and safety work must not be taken lightly. It concerns not only our personal safety, but also the safety of others.

Electric power workers are a team that can bear hardships and pay attention to dedication, which is my feeling since I engaged in electric power work. In order to ensure the safety of electricity use and standardize the electricity market, we electric workers pay more and get less. If we don't pay attention to safety and always keep it in mind, then the lives of our workers will be threatened, because everyone knows that "fire and water are ruthless", but if we are careless about safety, electricity will be like a killer. What I want to say more is that workers working in the front line of production have great responsibilities. Each of us is related to the happiness of a family. Our safety affects the hearts of mothers, children and even happy families! I sincerely hope that every electric worker should be careful at work, protect himself for himself, his family and his children, and do everything possible to create a tragedy. Before he goes to work, he must make a good analysis of "three measures and one point", never do illegal operations, and truly "go to work happily and go home safely" because safety responsibility is more important than Mount Tai.

June is the national safety production activity month every year, which shows the importance of safety, and safety production work is an important content of building a well-off society in an all-round way. Vigorously advocate safety culture, improve the safety awareness of all staff, strengthen the publicity and education of safety production, and create a good safety production environment atmosphere. Starting with the establishment of the "people-oriented" safety concept, the laws, regulations and power knowledge of safety production are publicized through radio, television and other news media, so as to achieve the purpose of encouraging, educating, progressing, restraining and motivating people, and then improve the awareness of safety production prevention of all employees. "Everyone is on the safe side" is to blame employees for paying attention to safety in their life, study and work, and to do "no harm to others, no harm to themselves and no harm to others". In particular, every electric power worker is required to raise safety awareness, strictly enforce safety production laws and regulations, ensure the safety of electric power equipment and electric power workers, and correctly grasp the key points in the management of electric power safety production. Safety production managers should always bear in mind that "safety is more important than Mount Tai", establish a sense of urgency of "being prepared for danger in times of peace" and raise safety to a political level to be familiar with it.

The electric power industry is a cause full of rising sun, and electric power enterprises are enterprises that are not afraid of difficulties, unite and cooperate, make selfless contributions and dare to innovate. We will build a great wall of steel to ensure the safe operation of the power grid with practical actions, sing the main theme of safety and create a better tomorrow for thermal power plants.

Power safety experience 4

Safety, I don't know how you understand the meaning of this word, but I know how important safety is to an electric worker. Power safety involves thousands of households in all walks of life, and safety work must not be taken lightly. It concerns not only our personal safety, but also the safety of others.

Power workers are a hard-working and dedicated team, which is my greatest feeling since I engaged in power work. In order to ensure the safety of electricity use and standardize the electricity market, we electric workers pay more and get less. If we don't pay attention to safety and always keep it in mind, then the lives of our workers will be threatened, because everyone knows that "fire and water are ruthless", but if we are careless about safety, electricity will be like a killer. What I want to say more is that workers working in the front line of production have great responsibilities. Each of us is related to the happiness of a family. Our safety affects the hearts of mothers, children and even happy families! I sincerely hope that every electric worker should be careful at work, protect himself for himself, his family and his children, and do everything possible to create a tragedy. Before he goes to work, he must make a good analysis of "three measures and one point", never do illegal operations, and truly "go to work happily and go home safely" because safety responsibility is more important than Mount Tai.

June every year is the national safety production activity month, which shows the importance of safety. Work safety in production is an important content of building a well-off society in an all-round way and an inherent requirement of practicing Theory of Three Represents. Vigorously advocate safety culture, improve the safety awareness of all staff, strengthen the publicity and education of safety production, and create a good safety production environment atmosphere. Starting with the establishment of the "people-oriented" safety concept, the laws, regulations and power knowledge of safety production are publicized through radio, television and other news media, so as to achieve the purpose of encouraging, educating, progressing, restraining and motivating people, and then improve the awareness of safety production prevention of all employees. "Everyone is on the safe side" is to blame employees for paying attention to safety in their life, study and work, and to do "no harm to others, no harm to themselves and no harm to others". In particular, every electric power worker is required to raise safety awareness, strictly enforce safety production laws and regulations, ensure the safety of electric power equipment and electric power workers, and correctly grasp the key points in the management of electric power safety production. Safety production managers should always bear in mind that "safety is more important than Mount Tai", establish a sense of urgency of "being prepared for danger in times of peace" and raise safety to a political level to be familiar with it.

"The Xiongguan road is really like iron, and now it is a leap from the beginning." In recent years, power safety production has gradually entered a virtuous circle track. However, the reality of safe production reminds us that there are still many shortcomings and loopholes in the management of safe production. Every electric worker can't sit back and relax, and must constantly improve. The electric power industry is a cause full of rising sun, and electric power enterprises are brave in difficulties, United and cooperative, selfless and innovative. We will build the Great Wall of Steel to ensure the safe operation of the power grid with practical actions, practice Theory of Three Represents in ordinary jobs, sing the main theme of safety, and create a better tomorrow for thermal power plants.

Power safety experience 5

Electric power production is a very complicated system engineering, and safety production is the result of the comprehensive action of many factors in this system engineering. Generally speaking, there are three types of power production accidents: first, natural disasters, such as lightning, strong winds, heavy rains, construction blasting and other uncontrollable or uncontrollable natural factors, all have their suddenness. Second, lines, equipment and equipment are inherently inadequate and have their concealment. The third is man-made disasters. Man-made violations of laws, regulations and laws are blind. And man-made disasters account for most of all accidents. Man-made disasters are divided into three forms: one is habitual violation of regulations, knowing that it does not meet the requirements, but for temporary convenience or luck. The second is that you don't know the rules, you know one of them, but you don't know the other. It happens that the second one has problems at work. The third is that I don't know how to pretend to understand the rules, and I'm in a fog, and I suddenly realize it after the accident.

Obviously, illegal workers are both accident makers and accident victims. However, it can be said for sure that all the accidents happened were not the subjective will of the staff. After the general accident, it is not difficult to draw a conclusion that many lessons, such as weak safety foundation, weak safety concept, poor safety management, low technical quality, weak safety protection ability, habitual violation, etc., will be taken as the focus of the accident and put on people's agenda. But is it really put on the agenda by our security departments, managers and producers at all levels to deeply analyze the causes of illegal business and come up with practical methods to put an end to illegal business from the source? Undoubtedly, through the production practice and blood lessons since power supply, a set of effective rules and regulations to ensure the safety of power production have been summarized and refined. According to the actual situation, various power production enterprises have formulated a large number of specific safeguard measures in different production periods, as well as random instructions, notices and requirements. These are the foundations to ensure the safety of power production and are unique. However, power production is a complex and changeable process, and the people engaged in production are the decisive factors for the safety of this process. However, people's level of understanding, acceptance, work attitude, experience accumulation and so on are different. It should be a long-term, arduous and complicated task for managers and producers engaged in power production safety to turn all the bases for ensuring power production into the conscious action of every employee engaged in power production. I think: the only way is to study-study-study again.

First, learn from me. Safety is not only the need of power production itself, but also the lifeline of production workers. Safety laws and regulations not only reflect the objective law of power production safety, but also are the code of conduct for people engaged in production. Therefore, everyone engaged in power production should learn safety skills.

Power safety experience 6

The electric power industry is a dangerous job, but as long as we master the law of electric power operation, always keep the vigilance of safe production, prevent delays and take every task seriously, we can completely tame the "electric tiger". The "safety regulations" and various safety measures in our hands are layers of cages and shackles designed for this vicious "electric tiger". This accident is precisely because the people involved in the work are careless about the tamed electric tiger, thinking that the electric tiger who has been arrogant for many years has really become a "sick cat". The danger of power system operation and maintenance is simply ignored, which is tantamount to opening the cage and shackles of "electric tiger" without authorization. This vicious "electric tiger" certainly won't miss any chance to show off.

Through research, I mainly have the following points:

1, safe production is not a slogan.

Safety in production is an epigram that we electric workers can hear or see all the time. But this is not only a slogan, but also the first criterion of our work and the only measure to ensure our personal safety. We can't ignore the danger of the future because of the previous safety. Forgetting this rule is to send yourself into the cage of an "electric tiger" with ingredients.

2, obey the command, obey the scheduling

Without all kinds of safety measures, the danger of electric power work is far greater than war. Because not everyone will die in the war, and if there is no guarantee of safety production measures in power production, no one can escape the clutches of the "electric tiger". Without strategic planning and flexible command and coordination of all arms and units, the war will fail. The same is true for electric power work. If there is no safety production measures as a weapon, if there is no strict command, it is very likely to cause self-injury, accidental injury, and even mass casualties, and at the same time cause immeasurable economic losses. No less than losing a war. Therefore, electric power work should be as disciplined and well-directed as the army.

3. The laws are not complied with and the law enforcement is lax.

With the promulgation of the Law on Safety in Production, safety in production has risen to the height of law. Yes, if you don't abide by the safety production guidelines personally, the consequences may be harm to others. This is "homicide"! It may also cause economic losses to the country, which is the crime of "endangering the country-family-security-public order"! Even if there are no serious consequences, you have committed the crime of dereliction of duty. If the safety measures in our work, such as "two votes and three systems", are not strictly observed by the staff, but go through the formalities, that is, "the law is not complied with and the law enforcement is not strict." It is a threat to personal safety and state property, and it is a crime. In the "Bengbu 5. 12" accident, the working ticket was "signed" and "unsigned", and the system of work interruption and signature handover was not strictly implemented, that is, the compliance with the safety production guarantee system was not raised to the level of legal compliance.

In the future, I will be strict with myself, earnestly abide by various safety guarantee systems, perform the duties of safety production, earnestly abide by the safety guarantee measures such as "two votes and three systems", and never be careless. For the happiness of my family and the prosperity of my career, I will cherish the precious lives of myself and others.

Power safety experience 7

While learning business skills, don't forget to learn safety knowledge. Since I entered the factory for a few months, the word "safety" has been said to me the most.

One day, the monitor solemnly handed me a "safety record" and told me to have a good look and be sure to finish it on time. After receiving the notebook, I felt heavy in my heart. I understand the monitor's intention: he wants me to understand "the importance of safety" in this way!

I remember that when we entered the factory, the leader asked our new employees to do the first step, which was to fully interpret the meaning of "Work Rules for Safety in Electric Power Production" and have a strict assessment. This gives us a preliminary understanding and understanding of the word "safety". As the saying goes: the environment changes people. After leaving the team, the masters never forget to say "pay attention to safety" when teaching me professional skills. Yes, "safety first"! Pay attention to safety anytime and anywhere. Every time I have an examination, my master asks me to wear a helmet and gloves. If any equipment abnormality is found, report it immediately, handle it in time, and never let go of any clues. Because any hidden danger will bring great harm to people and equipment, we must not be careless. At this point, I think I have benefited a lot from the study of "Safety Regulations" and the teaching of the masters during this period. For example, I won't wear high heels when I go to the desulfurization absorber, and I won't hold the same guardrail with both hands at the same time. Once, I found some slurry on the table of a running filtrate pump. I wanted to wipe it, but it suddenly occurred to me that it was dangerous to do so. It is clearly stipulated in the safety regulations that it is forbidden to wipe the mechanical equipment in operation by hand. So if there is no sense of security, it will bring some unpredictable consequences to the work.

If my understanding of "safety" was abstract and superficial in the past, I have a further understanding of "safety" through my practice and experience during this period. Every once in a while, after completing the business training, I will write some safety words and precautions according to my recent understanding and inspection of desulfurization equipment, so that I realize that safety is a major event, and I can't joke about it at all, let alone act rashly. Only by doing one's job wholeheartedly and firmly tightening the string of "safety" can we make our work and life by going up one flight of stairs.

Here, I want to say: "Safety is no small matter, we must be a conscientious person."