Advantages of RTO technology:
1, RTO technology can treat VOCs with different components and concentrations, and it is insensitive to a small amount of dust and solid particles in exhaust gas, and can be used to treat almost all exhaust gases containing organic substances;
2. Organic deposits can be cleaned regularly, and the regenerator can be replaced. The equipment has long service life, small maintenance workload and safe and reliable operation;
3. The concentration of waste gas is 2~3g/m? In this case, self-heating operation can be realized without adding auxiliary fuel;
4. Even if the regenerator has different structure types and gas velocities, the pressure loss of RTO device will be less than 3000Pa；;
5. The purification rate is high, with three-chamber RTO reaching 99% and two-chamber RTO reaching 95% to 98%, and the purification efficiency is the highest among all thermal combustion purification methods, reaching more than 95%;
Disadvantages of RTO technology:
1, the general equipment adopts ceramic regenerator, so the equipment is bulky and bulky, and can only be placed outdoors; 2. It is required to run continuously as much as possible (because it takes a long heating time to restart the equipment); 3. The one-time investment is large and the investment cost is relatively high;
4. The operation cost is high, especially when the exhaust air volume is large and the concentration is low;
After reading the advantages and disadvantages of RTO technology summarized by Kang Jinghui, you must have a deeper understanding of RTO technology. Kang Jinghui Environmental Technology Co., Ltd. provides users with one-stop service of design, manufacture, installation and maintenance. Through years of accumulation, our RTO regenerative combustion furnace has the following technical advantages:
1, excellent technology, stable and reliable operation of facilities, and ensuring discharge up to standard;
2. The operation can be transmitted to computer, mobile phone and PAD remotely, which is convenient for real-time control and adjustment of working parameters;
3. The equipment has a high degree of automation, no need for full-time care, low failure rate and simple maintenance.
If you want to know more about RTO or other waste gas treatment equipment, please visit Kang Jinghui's website or telephone for consultation.