How does Huawei switch view the corresponding ip address under vlan port?

How to query the IP address and MAC address of all ports on Huawei s5700 switch?

1. Find the MAC address of this machine. You can enter "ipconfig/all" on the command line to query. Find the current network card address. Then we enter the command "dismac-address448A-5BE2-5800" in the switch, and we can find the port corresponding to this mac address.

2. First, connect the switch. We can log in to the switch through remote control. Find the MAC address of this machine and enter "ipconfig/all" at the command line to query. Find the current network card address, as marked in the figure.

3. For the switch connected to the terminal equipment, just run displayarp directly. In the pop-up details, the ip address is followed by the port.

4. If there are multiple network segments on the switch, you can use displayarp to view the arp information of all network segments.

5. If it is a three-layer switch, you can directly check the arp when the computer is online. If there is no arp, check mac address table.

How to configure the VLAN interface IP address of Huawei VLAN switch?

1. Open the switch and first set the management IP address. Set the switch port mode, configure the access right of the telnetpc interface for connection test, configure the default route of the switch, and enable the teet service of the switch. Configure the telnet user and aaa authentication mode of the switch.

2. Huawei switches set ip mode. The PC side logs in through the console port of the device. Connect the switch through HyperTerminal. You will be prompted to change your password when you log in for the first time, and you will automatically log in after the change. Enter System View System View.

3. It seems that the simulator does not support three-layer port interchange, so the switch port should not be able to set ip. You can use vlan 10 port to communicate with the router port, and two devices can also communicate.

4. The VLAN virtual interface of the switch is loaded on the physical port, that is, after the physical port contained in VLAN is opened, the VLAN virtual interface will also be opened; For Layer 3 switches, IP addresses can be configured for multiple VLAN interfaces, and each VLAN interface can be accessed by default.

5.vlan cannot set IP. You just set the IP address of the switch. In addition, generally speaking, a switch can only have one IP, namely vlan 1.

How does Huawei switch view the ip address of each interface?

Click the network icon in the lower right corner of the computer. Open network and Internet settings and change adapter options. Double-click the connected network (Ethernet or WLAN) and select details in the new pop-up window to view the IP address and DNS server address.

Take the ENSP simulator as an example, see the following topology diagram: Double-click Huawei 5700 simulator with the left mouse button to enter the configuration interface. In current user mode, enter system view and enter configuration mode. Open the computer picture, as shown in the figure, and check the IP and MAC address of the computer.

Log in to the console. If you want to check the IP address of VLAN, please enter the interface VLAN Nif2IP address 19 1622525250 to check that this is the IP address of the switch. (The picture above shows a multi-VLAN multilayer switch). H3c switch default account number h3c, password H3C.

Environmental slogan 20 19

What company is Jiaze Xinneng?

Ten top tourist routes and nine representative landscapes in Xinjiang have been announced?

What does the C9 19 plane mean?

Are there any interesting tourist attractions in Changzhou?

How many Yonghui supermarkets are there in China?

R3 shift speed

Regarding the occupation of port 80, I entered netstat -ano under dos command and successfully opened it, but I don't know where to view port 80. enclose herewith

Director of Anyang Cultural Tourism Bureau

5 asset management self-inspection reports