In study, work and life, more and more places are exposed to the responsibility book, which helps to clarify everyone's goals and responsibilities. So, have you mastered the format of the responsibility book? The following is my collection of garage safety responsibility, I hope it will help you.
Safety responsibility book of auto repair shop 1 1. Before repairing the car, it is necessary to check whether the safety bench, jack or crane used are safe and reliable, and it is strictly forbidden to have unsafe factors.
2. When working with a jack, you must choose a flat and solid site. After the car stops, cover the wheels with triangular wood, and then support the car firmly with a safety stool according to the support points specified in the model. It is forbidden to simply use the jack truck and work under it.
3, repair work, necessary protective measures should be taken, pay attention to protect the car paint luster, decoration in good condition, carpet and seat clean.
4. During construction, tools and spare parts must be placed neatly in a certain order, and must not be placed anywhere, and operated in a civilized manner according to the requirements of "three no landing". After completion, the scrubbing tools should be counted and put away.
5. When disassembling parts, be sure to use appropriate tools and special tools, and operate according to the process requirements, so as not to be reckless.
6, in the process of repair, should carefully check whether the original and replacement parts meet the technical requirements, in strict accordance with the repair technical specifications, serious construction, strict inspection and debugging.
7. Don't put your hand into the gearbox to check the gear, so as not to bite your finger. Don't try the screw hole and pin control with your fingers, lest your fingers be misplaced and cut short.
8, maintenance of waste oil or oil basin, must be placed in a safe or designated place, shall not be arbitrarily misplaced. In particular, the gasoline tank must not be placed near the engine exhaust pipe and muffler.
9. After the completion, before starting the engine, check whether all components are assembled correctly, whether lubricating oil and cooling water are added, put the transmission in neutral position, tighten the hand brake and tap the motor for trial operation.
10. Never start the engine when there are people in or under the car.
1 1. When the engine is overheated, don't open the water tank cover immediately to prevent people from being injured by boiling water.
12. Start the engine for a long time in the workshop to avoid carbon monoxide poisoning.
13. Do not direct the vehicle to drive directly in front of or behind the vehicle to avoid being scratched or crushed.
14, after the completion of the work, to clean up the scene in time, put the maintenance tools back to the designated location, keep the construction site clean and tidy.
15, the switch must be turned off before work.
16. Anyone who fails to perform the above duties seriously will be given economic punishment and administrative sanctions of 5-200 yuan.
Ordos xx Tongda auto sales service co., ltd
xxx
20xx x month xx day
The meeting was presided over by * * *. According to the spirit of the regular meeting of cadres held by the general manager and some phenomena found in the recent supervision and inspection work, the next step was newly deployed.
1, safety supervision and inspection. From once a month to twice a month, the main participants, safety officers and principals give rectification instructions according to the inspection situation; Hold regular safety meetings at the end of each month to report the recent safety work.
2. Safety inspection system. On-site inspectors, safety officers, management personnel, etc. All parts shall be inspected and registered according to the system. The frequency of inspection is low, and those who do not follow the system will be punished according to relevant regulations; The rolling mill added a record book to the thin oil station, and the personnel checked and registered properly.
3. Factory vehicle management. At present, our company has a large number of vehicles, such as forklifts, transport vehicles, tractors, excavators, commercial vehicles and so on. Therefore, it is necessary to strengthen the supervision and management of on-site personnel, especially construction vehicles, to explore the construction site, and to stop or notify the security department to deal with violations.
4. Conduct pre-job training for safety leaders and special operations personnel in different regions. Special steel and high-speed wire rod will be put into production soon, and now all regions should set up part-time safety leaders; The safety operation procedures of each post should be compiled into a book, and employees should be trained in a targeted manner.
5, homework ticket use. At present, there are many aerial work, hot work and confined space work, but the use of individual work tickets is not in place. People at all levels sign the working ticket, which also informs you to check its preventive measures and arrange personnel to check and assist, and also reflects the importance attached to safety. If the next inspection finds that the operation ticket has not been handled, it will be punished according to the regulations, and if the illegal operation is found, the punishment will be doubled.
6. Safety signs on the project wall. Now that the high-speed rail has been partially completed, it should be used as soon as possible, especially the gas station, power distribution room, operation desk and other parts, which will be tested soon to serve as a warning to operators and outsiders; Some special steel safety signs should be made after collection; The marking of new factory buildings must be carried out according to the promulgated national laws and regulations.
7. Smoking is strictly prohibited. At present, people have been arranged to conduct inspections every day, and occasional surprise inspections at night. If anyone is found smoking at the scene, it will be handled according to the regulations. No matter what happens, everyone should be informed in place, including our employees and foreign construction teams.
8, lightning protection self-inspection. Each factory uses the key table to do self-inspection on the grounding of gas station and power distribution room to see whether the grounding meets the requirements; At present, in order to reduce the damage of lightning and static electricity to electrical appliances or lines, some units have installed surge devices in dangerous parts such as gas stations to prevent damage. Let's see if we should install them.
9. Summer is coming, so we should do a good job in heatstroke prevention and gutter cleaning. Measures such as increasing part of cooling water for employees; Some equipment should be checked; The driving temperature is high, so it is necessary to check and maintain the air conditioner and urge the new driving air conditioner on the project. Before the rainy season comes, it is necessary to clean the gutter and the sink on the top of the workshop, repair the damaged downspout, and prevent rainwater from recharging or getting wet. The low-lying temporary lines of the construction team of this project should be cleaned up to prevent accidents.
10, traffic safety. Some new employees have entered the project one after another, emphasizing traffic safety. At the same time, it is necessary to issue a receipt now, so that they can form good habits from the beginning.
Safety Responsibility Letter of Auto Repair Shop 3 This safety responsibility letter is formulated in combination with the actual situation of our factory in order to further strengthen the personal and property safety management of all employees of xxxxx Auto Repair Shop, enhance the safety awareness of all employees and clarify the safety responsibility.
1. All employees in our factory must strictly implement the national safety regulations and related safety management systems and obey the safety management of the factory department. In the production process, if all operations are not carried out according to the regulations and relevant regulations, resulting in safety accidents, all consequences shall be borne by the parties concerned and the waiting master.
2. The employees of our factory must abide by the traffic laws and regulations on vehicle management (including employees' motorcycles) explicitly stipulated by the state. People without a driver's license are not allowed to drive any vehicles. Persons with driver's licenses are prohibited from driving "three noes" vehicles and vehicles that do not conform to the quasi-driving type. It is forbidden to drive after drinking, and you are not allowed to enter the factory to repair vehicles without the permission of the factory department. If they violate the regulations, they will bear all the responsibilities, which has nothing to do with our factory.
3. Employees should pay attention to personal safety when they go out during working hours during vacation or off-duty (including commuting), and must abide by national laws and regulations, traffic regulations and codes of conduct in public places. If personal injury or property loss is caused by our own factors, our factory will not be responsible.
4. Employees living in the factory must abide by the schedule of work and rest of the factory (no going in and out at 8 o'clock every morning and no going out at 8 o'clock every night), and are not allowed to engage in illegal activities such as pornography, gambling, drugs or other behaviors that violate social morality in the dormitory of the factory, and are not allowed to lead non-factory personnel into the dormitory or stay overnight. If there is any violation of the regulations, all the responsibilities caused by it shall be borne by it. If illegal and criminal activities are involved, the factory has the right to transfer it to the public security organ for handling according to law.
5. It is forbidden for all employees to play and frolic by the river, pond and weir at any time.
When swimming, you are not allowed to contact or associate with socially undesirable people, and fighting is strictly prohibited. If anyone violates this article, he/she will bear all the responsibilities, which have nothing to do with the factory, and be dismissed.
Six, all employees are not allowed to carry flammable, explosive or other dangerous goods in and out of the factory, are not allowed to hold controlled knives or instruments, are not allowed to damage the personal and property safety of the factory and others, and are not allowed to dump leftovers indiscriminately. If there is any violation, once found, they will be investigated for all responsibilities and forced to dismiss.
This responsibility book is made in duplicate, one for the factory department and one for the employee guardian.
Xxxxx automobile maintenance factory
Legal representative:
Official seal:
Date:
Employee signature (handprint):
Date:
Signature of guardian (handprint):
Date:
Signature of shift supervisor (handprint):
Date:
Safety Responsibility Letter of Auto Repair Shop 4 In order to strengthen the safety production awareness of employees in each repair shop and implement their respective responsibilities, our factory signed a safety production responsibility letter with all employees:
1. Before repairing the car, you must check whether the safety stool, jack or hoist used are safe and reliable, and it is forbidden to have unsafe factors.
2. When working with a jack, you must choose a flat and solid site. After the car stops, cover the wheels with triangular wood, and then support the car firmly with a safety stool according to the support points specified in the model. It is forbidden to simply use the jack truck and work under it.
3, repair work, necessary protective measures should be taken, pay attention to protect the car paint luster, decoration in good condition, carpet and seat clean.
4. During construction, tools and spare parts must be placed neatly in a certain order, and must not be placed anywhere, and operated in a civilized manner according to the requirements of "three no landing". After completion, the scrubbing tools should be counted and put away.
5. When disassembling parts, be sure to use appropriate tools and special tools, and operate according to the process requirements, so as not to be reckless.
6, in the process of repair, should carefully check whether the original and replacement parts meet the technical requirements, in strict accordance with the repair technical specifications, serious construction, strict inspection and debugging.
7. Don't put your hand into the gearbox to check the gear, so as not to bite your finger. Don't try the screw hole and pin control with your fingers, lest your fingers be misplaced and cut short.
8. Waste oil or oil basin used for maintenance must be placed in a safe or designated place.
Don't put it anywhere at will. In particular to an engine exhaust pipe and an exhaust pipe.
Never put the gasoline basin near the sounder.
9. After the completion, before starting the engine, check whether all components are assembled correctly, whether lubricating oil and cooling water are added, put the transmission in neutral position, tighten the hand brake and tap the motor for trial operation.
10. Never start the engine when there are people in or under the car.
1 1. When the engine is overheated, don't open the water tank cover immediately to prevent people from being injured by boiling water.
12. Start the engine for a long time in the workshop to avoid carbon monoxide poisoning.
13. Do not direct the vehicle to drive directly in front of or behind the vehicle to avoid being scratched or crushed.
14, after the completion of the work, to clean up the scene in time, put the maintenance tools back to the designated location, keep the construction site clean and tidy.
15, the switch must be turned off before work.
16. Anyone who fails to perform the above duties seriously will be given economic punishment and administrative sanctions of 5-200 yuan. Signature of person in charge:
Signature of maintenance personnel:
date month year
In order to strengthen the supervision and management of safety production of automobile maintenance enterprises in our county, urge enterprises to conscientiously implement various safety production management systems and ensure the safety production of road transportation. According to the spirit of the relevant documents of the higher authorities, combined with the actual safety production of automobile maintenance enterprises in our county, this responsibility book for safety production management is specially signed:
First, automobile maintenance enterprises should conscientiously implement the laws, regulations and policies of their superiors on strengthening road traffic safety production, and establish the idea of "safety first, prevention first".
Second, automobile maintenance enterprises should conscientiously implement the qualification training for employees, hold certificates according to regulations, and regularly organize employees and drivers of their own enterprises to carry out laws, regulations and safety education.
Three, establish and improve the responsibility system for production safety and improve the rules and regulations of enterprise safety production, and formulate corresponding safety production systems according to different types of work and different positions.
Four, while doing a good job in safety production, we should establish and improve the safety production account, records, secondary maintenance account, vehicle secondary maintenance bicycle files, and make registration.
Five, automobile maintenance enterprises should strictly in accordance with the national standard "technical specification for automobile maintenance, detection and diagnosis" (GB/T 18344-20xx) requirements for secondary maintenance of automobiles, and ensure the quality of secondary maintenance of operating vehicles. It is strictly forbidden to practise fraud, buying and selling two-level maintenance factory certificate; Sign a maintenance contract according to the regulations, and it is strictly forbidden to leak, reduce or repair violations in the secondary maintenance operation; Establish and improve vehicle maintenance files and accounts.
Six, do a good job of fire safety production in this enterprise.
Seven, according to the provisions of the extraction of safety production costs, and strengthen the management of safety production costs,
Ensure that the safety production expenses are earmarked for safety production.
Eight, strictly implement the safety information reporting system, when an accident occurs, should be based on the degree of the accident, respectively, to the relevant departments to accurately report the accident information, data and information.
Nine, the above safety management system, enterprises should be based on the annual implementation, at the end of the year to write a written report submitted to the county transportation management office.
X. The term of validity of this letter of responsibility shall be from the date of signing to the date of signing the next letter of responsibility.
XI。 This responsibility book is made in triplicate: one for the county transportation bureau, one for the county transportation management office and one for the responsible unit.
xxx
20xx x month xx day