ADSL Modem and Router Series:
Huawei MT800 router port mapping digital China DCAD-60 10RA ADSL routing settings.
Alcatel _ ADSL _ Modem511E Port Mapping Setting Putian (GS8 100) Port Mapping Method
Tengda TED8620 setting method Itek (e.TEK.TD)TD-20 18 cat port mirroring setting.
ZTX ZTE _ADSL_83 1 Port Mapping Settings Tianyi _ADSL_HASB- 100 Port Mapping Settings
Shida _ADSL_2 1 10EH port mapping setting Daya Technology DB- 108 router port mapping method
Set the port mapping in greennet ADSL modem1500c ASUS 6000ev/6005hw ADSL modem.
Set the port mapping frequency in LINKSYS ADSL router and set the port mapping in blue elf router.
IM 70 1G Emma white ADSL modem setting port mapping Heqin 642 Adsl modem setting port mapping.
Quanchuang 1 100 white ADSL MODEM setup port mapping diagram.
D-Link DI-604 port mapping
Top port mapping of Huawei MT800 router
Enter the address of the router in the address bar of IE (default ip: 192. 168. 1, user name: admin, password), and IE will naturally pop up a window asking for the "user name" and "password" of the router. The implicit setting of MT800 is admin/admin.
After entering the setting page of MT800, click "Other Settings" in the upper left corner. Select NAT (in the drop-down menu of Other Settings).
After entering the NAT page, first make sure that the option of NAT is Allow, and then click Add.
A table will appear in the pop-up NAT rule addition, with the following changes:
Regular taste selection RDR
Rule ID fill in 2
Select ppp-0 in the IF name.
Select TCP in the protocol.
Fill in 192. 168. X.X in the local address From (this is your internal IP address. If it changes, you can modify it yourself later).
The local address To is also192.168.x.x.
In the global address from and to, do not fill in either, that is, keep 0.0.0.0.
Fill in the TCP port you want BS to open in the last three ports (target port start value, target port end value and local port) (the setting defined by BS is 1688 1, and here we enter 1688 1 to 16889).
After submission, the port mapping is complete. If it is not enough, the possible error is IF NAME (possibly ppp- 1).
Digital China DCAD-60 10RA ADSL Routing Settings Top
Log in to the router's Web management interface (default ip:192 ..168.1.1,user name adsl, password adsl 1234).
After entering, select in the following order: service -> NAT.
Select the NAT rule entry in the NAT option. Then click Add to display the following interface, and fill in the corresponding parameters.
Click "Submit" after setting.
Specific parameters are described as follows:
Rule Style: Rule Type
Rule ID: Judge the serial number of the address translation rule, and the one with the smallest serial number will be executed first. If any rule is satisfied, it is not judged to be executed to a higher ID.
If Name:, please select the corresponding WAN interface, such as PPP, 1483B, etc.
Protocol: Select the corresponding protocol (TCP/UDP/ICMP, etc.).
Local address source: use the local IP starting value of the rule, and if all are selected, fill in 0.0.0.0.
Local address to: use the local IP end value of the rule, and fill in the IP start value if it is a single IP. If all are selected, please fill in 255.255.255.0.
Global address From: No modification is required.
The global address is: No modification is required.
Destination port From: the port starting value of destination IP (1688 1).
Destination port To: the port termination value of the destination IP (16889).
Local port: local IP port (0)
After setting up the ADSL route, network cable and switch, it is time to set up the internet computer. Many people often fail when they do this. It must be noted here that when surfing the Internet through ADSL***, there are three main options for the network settings of each computer, namely IP address, gateway and DNS configuration. Many people make a mistake, that is, the routing settings of DNS and ADSL are inconsistent. If you don't make any choice in the routing settings of ADSL (DHCP/DNS) ("DHCP server of local area network" is not selected), you can't choose the DNS of the local ISP in the network settings of the computer, and you can't get online anyway. At this point, the built-in IP value of ADSL should be filled in DNS. That is to say, the gateway is the same as DNS in computer network settings, and the built-in IP of ADSL should be filled in. The IP corresponding to the gateway and the built-in IP of ADSL are in the same network segment.
Alcatel _ ADSL _ Modem511E port mapping settings at the top.
Enter 10.0. 138 in the browser window to enter the routing setting window.
Then select advanced configuration -NAPT- add.
Then select:
The communication protocol is TCP.
The internal IP is the network card IP. If you don't know, please use 10.0.0. 1
The internal and external ports are 1688 1.
The external IP0.0.0.0 remains unchanged.
Similarly, add the port of 16882~9.
Finally, click "Apply"
Then be sure to click the "Save all settings" option in the upper left corner.
You're finished. Please turn it off. The ADSL modem is powered off. restart
TOP method of Putian port mapping (GS8 100)
Putian (GS8 100) carries out port mapping to upgrade ID (under LAN routing):
IE browser type:192.168.1.1.
Enter the user name and password of the modem.
"Service -NAT- drop-down menu: NAT rule entry"
Click "Add"
A new window will appear with the following settings.
Rule ID: 2 (sequence number, based on the original mapping, if not, generally 2)
Regular flavor: RDR
If Name: All
Protocol: tcp
The local address comes from:192.168.1.6 (your IP in the local area network).
The local address is:192.168.1.6 (your IP is in the local area network).
The global address comes from: 0.0.0.0.
Global address to: 0.0.0.0
Target port starting value: 1688 1
Destination port termination value: 16889
Local port: 0
Click "submit"
Then save and restart.
Setting method of tengda TED8620 gyro
Putian (GS8 100) carries out port mapping to upgrade ID (under LAN routing):
IE browser type:192.168.1.1.
Enter the user name and password of the modem.
"Service -NAT- drop-down menu: NAT rule entry"
Click "Add"
A new window will appear with the following settings.
Rule ID: 2 (sequence number, based on the original mapping, if not, generally 2)
Regular flavor: RDR
If Name: All
Protocol: tcp
The local address comes from:192.168.1.6 (your IP in the local area network).
The local address is:192.168.1.6 (your IP is in the local area network).
The global address comes from: 0.0.0.0.
Global address to: 0.0.0.0
Target port starting value: 1688 1
Destination port termination value: 16889
Local port: 0
Click "Submit" and then save and restart.
Yitek (e.TEK.TD)TD-20 18 Set the top of the port image for cats.
Open IE, enter the address of the router in the address bar, such as192.168.1.1(implicitly), and then enter.
Fill in the login name and password in the pop-up login window (the implicit login name of TD-20 18 is empty, and the password is 12345), and then click OK.
After entering the webpage of TD-20 18, you can find "Port Binding Service" on the left and click "Port Binding Service".
To enter the "port binding service" column, we must first do TCP port mapping.
1. Select TCP.
2. Fill in the TCP port used by EMULE. The implicit setting in EMULE is 1688 1.
3. Fill in the intranet IP address of the host.
4. Click "Add" to add the TCP port mapping as a "service list" (after adding, a port mapping service will be added to the following "service list").
5. Similarly, add the mapping of 16882~9.
Click Save Settings.
The port mapping of TD-20 18 needs the support of NAPT. Check whether NAPT is turned on.
Click "NAPT" settings.
Select enable NAPT and click go.
Finally, click "Restart". After the cat restarts, the port mapping is normal.
TOP setting of ZTX ZTE ADSL 83 1 port mapping
Open IE, enter the cat's address in the address bar, such as192.168.1.1(implicit), and then enter.
Fill in the login name and password in the pop-up login window. The implied login name and password of ZXDSL83 1 are all uppercase ZXDSL, and then click OK.
After entering the WEB settings page of ZTE ZXDSL83 1, you can find "service" in the upper right and click on the service.
After entering the service, click "NAT" at 1 on the left, select "NAT rule entry" at 2 places, and then click "Add".
First, let's make a TCP port diagram. The TCP port used implicitly by BS is 1688 1.
1: Select RDR.
2. Fill in a rule ID and write a number casually, as long as it doesn't duplicate the previous one. For example, you can take 1688 1.
3. Choose ppp-0 (it depends on your cat, but most cats use ppp-0).
4. select TCP
5. Here are two, fill in the intranet IP address you got (note that sometimes the intranet IP will change, and if it changes, you need to come back here and make corresponding changes).
6. There is no need to change the two addresses here, and keep them at 0.0.0.0.
7. Select all three Any Other Ports.
8. All three TCP ports used by 8.BS are filled, for example, 1688 1.
9. Add 16882~9 in the same way.
Click 9 to add.
Return to the NAT column again, confirm that the IP of the computer with TCP port BS already exists in the NAT rule, and then click ADMIN.
In Administration, click Submit &; restart
Select "Restart from Last Configuration", click "Save" to save the configuration, and then click "Restart" to be ok.
Tianyi _ADSL_HASB- 100 port mapping settings are set at the top.
The implied address of Tianyi HASB- 100 ADSL cat is 10.0.2 (factory default).
Open IE and enter the router address in the address bar (for example, 10.0.0.2), and you will enter the login window of the router.
Fill in the login name and password of the router at 2 places. The factory default login name is admin, and the factory default password is epicrouter or conexant.
Click OK at 3 places.
If the password is correct, IE will go to the cat's WEB configuration page and click "Virtual Server" in the lower left corner.
We need to map two ports, one is the TCP port of bs (default is 1688 1).
Of course, you don't have to use the default port number of bs.
1. Fill in the ID number and map a number to this port, for example, 8 1.
2. TCP ports used by 2.BS should be filled in the column of public port and private port (default is 1688 1), and the numbers in these two columns should be the same.
3. Select "TCP" as the port type.
4. Fill in your intranet IP address, such as 10.0.0.8 (the intranet IP address can be seen in the introduction on the top floor).
5. Click Add this setting to add this port mapping to the NAT rule.
Click "Save Settings". Do the same 16882~9.
Click "Save Settings", then restart cat, and the port mirroring setting is completed.
Shida _ADSL_2 1 10EH port mapping setting is set at the top.
Suppose the IP of the intranet is:192.168.10.2.
Use ing port, starting at 25 and ending at 25 in IE.
New port start: 25, end: 25
New IP address:192.168.1.2 Save the settings.
Setting up port mapping TOP in LINKSYS ADSL router
Click "Advanced" in the main menu, and there will be a "Forward" in the next menu with the following settings:
Exit: 25 to 25
Ip address:192.168.1.2.
Then click "Apply".
Set the port mapping TOP in the frequency blue elf router.
Click Distributed Server Settings (Virtual Server) under the Advanced Settings page.
Each virtual server is defined as a service port, and all access to this port will be redirected to the corresponding service.
The computer corresponding to IP.
Service service port service IP enabled
Email 25192.168.1.2 √.
IM 70 1G Emma white ADSL modem sets the port mapping top.
Enter ADSL Settings-Security Settings Advanced Configuration of NAT ...-Add Reservation Mapping. ...
Add 25 port mappings,
As follows: IP address transmission type Port number inside the global IP address.
Same interface address192.168.1.2tcp25.
Save-Restart the device.
Heqin 642 Adsl modem sets the top of the port map.
Enter telnet192.168.1.1in the run or MSdos window, and enter the password (the default value is 1234) to enter the ZyNOS system.
Enter the menu 1 1. 1- remote node configuration file.
Use the space bar to change the edit filter group = No to Yes, and enter the menu 1 1.5- Remote Node Filter.
Use the space bar to delete the protocol filter =6, then enter the car and save it. After returning, edit the filter set = No, leave it alone and save it in the car.
Set 15.sua server setting port # ipaddress in the mail menu.
- -
1.25 192. 168. 1.2
Enter and save.
Set the port mapping TOP in Quanchuang 1 100 white ADSL MODEM.
Enter http:/192.168.0.2/doc/setvs.htm in the IE address bar.
Generally, it defaults to user: administrator password: 12345678 (or 123456).
Enter virtual server settings
Both "public * * * port" and "private port" are filled with the port (25) to be done.
Select TCP as the Port Type.
"Host IP address" is the intranet IP of your PC (192.168.6438+0.2). Then click Add this setting.
Enter 192. 168.0.2 in the IE address bar to enter the main interface, and click "Save Settings" to restart ADSL.
Dayadab108 and 102 set the port mapping.
Enter http:/192.168.1.1/doc/index1.htm in the IE address bar.
Enter virtual server settings
Add an intranet IP using port 25.
Submit and save
D-Link DI-604 port map top
Take the Web server as an example, and the LAN ip is set to192.168.0.173.