Current location - Quotes Website - Collection of slogans - Asking for safety slogan of chemical workshop
Asking for safety slogan of chemical workshop
Chemical enterprises have a "14 ban" to ensure the safety of production.

Strengthen the management of open flames and prohibit smoking in the factory.

According to the characteristics of fire prevention and explosion prevention in chemical enterprises, the use of open flames should be strictly controlled and managed. For hot work that must be carried out in the production workshop, hot work procedures should be handled and reliable safety measures should be taken. Besides, smoking is not allowed in the factory.

Minors are not allowed to enter the production area.

Chemical production area is a place where toxic and harmful substances are concentrated, so you must be familiar with the relevant safety system, production operation, equipment and environment before entering. Minors are not allowed to enter the production area.

Working hours are not allowed to do things unrelated to production.

Only by concentrating on the work can we grasp the responsibility goal of this position, pay attention to the equipment operation, the balance of process materials between the upper and lower processes and different situations at any time, and ensure safe production. Doing things unrelated to production, such as reading magazines and chatting with posts during work hours, will lead to accidents.

No drinking before and during class.

Drinking will make people lose their senses and the ability to correctly handle instructions, which will lead to accidents.

Do not use flammable liquids such as gasoline to scrub equipment, appliances and clothes.

Flammable liquids such as gasoline have been used as cleaning agents for a long time because of their strong decontamination ability, but this often leads to accidents such as fire and explosion due to improper use, so it is forbidden to scrub equipment, clothes and appliances with gasoline.

Do not wear labor protection articles according to regulations, and are not allowed to enter production posts.

Wearing protective equipment according to regulations is the second line of defense for safe production, personal safety and injury prevention.

Equipment and tools with incomplete safety devices are not allowed to be used.

Protective safety devices, signal safety devices, safety safety devices and interlocking safety devices are necessary devices to ensure normal production and prevent personal, operational and equipment accidents. Not only should it be complete, effective, sensitive and reliable, but it should also be checked regularly according to the system.

Equipment and tools that are not in charge of themselves are not allowed to be used.

Operating production equipment and tools must have professional skills. There are not a few people who use equipment without knowing the performance of equipment and tools, or who are familiar with equipment, but have accidents because they are not on duty and do not know the current working situation.

In the process of equipment maintenance, maintenance can only be started after safety measures are implemented.

Chemical production equipment is different from general equipment. Before overhaul, before cleaning and replacing chemicals in the equipment, insulating fillers must be removed and isolated from the production system. If you don't handle the maintenance work permit, stop sending contact sheets and other work tickets according to the regulations, an accident will happen.

After shutdown, the equipment shall not be started without thorough inspection.

Chemical production equipment is interconnected. After shutdown, the internal situation often changes abnormally, and accidents are easy to occur if safety measures are not implemented. Therefore, it is necessary to conduct a comprehensive inspection according to the startup procedure and confirm that it is correct before starting.

Don't work high above the ground without a work permit, don't wear a seat belt, and scaffolding and springboard are not reliable.

In China, it is generally stipulated to work at a height of 2 meters above the ground. Fastening the safety belt can protect the life safety of the operator in case of falling. Scaffolding and springboard are the first conditions for climbing.

The springboard can only be operated after it is fixed on asbestos tile.

Asbestos tile is a light building material, which can't bear the load. It can only be used for pressure relief roofs of adjacent buildings and explosion-proof workshops. Therefore, when working on asbestos shingles, the springboard must be fixed to prevent falling accidents.

Mobile electric tools without electric shock protectors are not allowed.

Mobile power tools are widely used, which is easy to cause leakage. Electric shock protector is a protective instrument to prevent electric leakage and electric shock. If there is an electric leakage or electric shock accident in the system, it can immediately send out an alarm signal and quickly cut off the power supply, thus playing a role in protecting personal safety.

Workers who have not obtained the safety operation certificate are not allowed to work independently.

Special type of work, without obtaining the certificate, are not allowed to work. Working without a license is illegal.