Most of the walls in bathrooms, kitchens and other spaces are paved, but the area of each wall cannot be completely arranged with the required full-size tiles. At the same time, some walls, doors, windows and other areas do not need to be paved with tiles, so it is necessary to minimize the cutting of tiles and try to make the tiles of the whole wall arrange symmetrically and feel comfortable in visual effect.
At the same time, try to place the tiles that need to be cut in blind areas, such as behind doors and other areas where shielding is installed. In this way, the tile paving effect will be better in the overall line of sight. If the tiles are made by Huawei, there will be a unified direction indication on the back of the tiles. In the process of paving, never ignore them. Once the tile patterns are not aligned, the overall effect will be greatly reduced.
However, in the traditional wall brick pressing, the masters like to paste the floor tiles first and then directly, but the time cost will be great, because once the floor tiles are pasted, they must wait until all the floor tiles are pasted. Moreover, when sticking wall tiles, if the floor tiles are not well protected, it is easy to damage the paved floor tiles.
And if you stick wall tiles first, then stick floor tiles, you don't need to consider the above two issues. The advantage of reserving a part of the blank is that it is convenient for the floor tiles to be pressed under the bare wall and wall tiles in the later period, and the reserved blank can be made up by heightening the base.
In addition, you can also leave more blanks when pasting the wall tiles, so that after pasting the floor tiles, you can cut some tiles for collage according to the remaining blanks. On the one hand, it effectively avoids the damage to floor tiles when sticking wall tiles, and on the other hand, it gives the ground an extra layer of protection for waterproofing, which can be said that the effect is very good.
However, there are two points to pay attention to when tiling the bathroom like this:
1, ground water test, that is, before tiling, the waterproof layer of the ground should be tested (that is, some water should be poured underground and marked), and the results can only be seen after 24 hours of testing. If the ground water level does not drop significantly after 24 hours, it means that the waterproof seal is good, and then the tiles can be pasted.
2. When sticking wall tiles, it is troublesome to fix the bottom tiles at first. If it is not handled properly, it is easy to cause dislocation of wall tiles during construction, thus affecting the overall beauty. At this time, it is suggested that the masters can use some professional jacking devices when sticking the wall bricks, which can not only effectively fix the bricks, avoid dislocation, reduce the error of sticking bricks, but also speed up the construction.