Current location - Quotes Website - Collection of slogans - The laser vision camera cannot be connected.
The laser vision camera cannot be connected.
The laser vision camera can't be connected, because the network is blocked, so we need to check the network environment.

1. power supply: firstly, confirm whether the camera is powered on normally and whether the indicator light or infrared lamp is on.

2. Restore the factory settings: press the machine reset key for 8- 10 seconds.

3. Test scope: During the test, it is necessary to keep the camera and router within 2m, and return to their original positions after the test is normal.

4. Network connection mode: Make sure to use the following methods to connect to the wireless router WIFI, and the mobile phone will share hotspots.

5.WIFI name (password): Chinese and special symbols are not supported, and the password length is limited to 14 digits.

6. Memory expansion: During the test, extended memory cannot be installed on the device.

7.5g wifi: 5g network is not supported for the time being.

8. Hide WIFI: Hide WIFI is unrecognizable.

Third, if you still can't connect: connect with a network cable and connect the router to the camera.

1. Make sure that the green light on the back of the camera is always on and the orange light is flashing.

2. The mobile phone and camera must be in the same network WIFI.

3. Connect 1-2 minutes, and then go to the APP and try again.