Quality control is the whole process from raw material control, production and processing, product making, finished product detection to finished product warehousing and after-sales quality tracking. The following is a summary of the annual work of the quality control department that I compiled for you.
Annual Work Summary of Quality Management Department 1
In the past year, with the support and help of leaders and colleagues, I have done my duty in my post with what I have learned and accomplished all the tasks well. Made due contributions to the company. At the same time, as a chemist, I am further studying from thought to action, from theory to practice, and improving my work level. I will summarize my work this year as follows:
First, study hard and improve yourself:
With the development of the company, the number of laboratory instruments has increased. In order to complete the work better, on the basis of the previous work, we have learned new experimental methods such as oil content in water, diesel hydrocarbon composition (dilution method) and hcl determination. , and mastered them skillfully, and completed the related tasks well. Secondly, we often encounter some new problems in our work, which are finally solved through discussion and research with leaders and colleagues. At the same time, I have a further understanding of related work.
Second, the work content and experience:
My job is mainly to cooperate with other positions in R&D Department I to make corresponding analysis. Firstly, the refractive index and hydrocarbon composition of the oil after evaluation by reforming catalyst are analyzed; Secondly, the hydrocarbon composition of diesel oil extracted by aromatic hydrocarbon in extraction group is analyzed. Thirdly, the viscosity, acid value and chromaticity of pyrolysis oil were analyzed with research. Fourth, responsible for the analysis of oil content and scale of water samples; In addition, it is responsible for the correlation analysis of acid value, wax content, mercaptan sulfur, chromaticity, freezing point, viscosity and countercurrent viscosity in crude oil evaluation; Participate in the production of hr-05b300 solvent, and be responsible for sampling and viscosity analysis * * * 2 1 day; Secondly, some stored oil samples were analyzed by colorimetry and other experiments. In addition, I also actively cooperate with other colleagues to complete some tasks.
In one year, under the careful care and guidance of leaders and colleagues, I * * * completed more than 500 chromaticity data; Refractive index data150; 88 Viscosity data; 140 countercurrent viscosity data; 245 Oil data in water; Fluorescent group data193; Composition data of diesel oil family115; The acid value data exceeds 30; Wax content data11; Density data16; 5 cold spot data; Bromine valence bromine index data 18.
The work of the laboratory is thin and trivial, and because we mainly engage in research and development, it is not as regular as the laboratory work in the refinery. We will often encounter different new problems. Therefore, in order to do a good job, I am not afraid of trouble, carefully observe the experimental phenomena, consult leaders, learn from colleagues, explore and practice by myself, seriously study relevant business knowledge, and constantly improve my theoretical level and comprehensive quality.
When working in the laboratory, it is very important to have safety awareness and environmental awareness. So I am very devoted to my work, I can treat every job correctly and seriously, memorize all kinds of safety measures, and I don't panic when things happen. Environmental protection is also very important, so that every chemical reagent and oil sample that needs to be treated should be treated in a centralized and classified manner, and it is not allowed to be dumped at will. These have a great impact on the environment. When washing bottles, don't pour oily sewage casually. At the same time, pay attention to the ventilation of the laboratory and the placement of various chemical reagents and oil samples.
Third, work attitude and effort:
I love my job, treat every job correctly and seriously, make a personal work plan before starting work, and give priority to finishing all the work in time. Enthusiastic service for everyone, seriously abide by labor discipline, and ensure attendance on time. Make effective use of working hours, stick to your post, and need to work overtime to finish the work on time, so as to ensure that the work can be completed on time. Style, can abide by the rules and discipline, unite colleagues, seek truth from facts, optimistic, and always maintain a rigorous and serious work attitude and meticulous work style. Actively participate in various activities organized by the company, such as spring outing and autumn pentathlon competition.
Summing up the work in the past year, although some progress and achievements have been made, there are still some shortcomings in some aspects. For example, many experiments just stay in simple operation, ignoring the working principle; During the experiment, the experimental instruments are damaged or the experimental results have great errors due to their carelessness. There are still some experiments that are not skilled enough and perfect enough, which need to be improved in the future work. Through this period of work practice, I know that we must be careful in doing experimental analysis and not let go of a doubt. Ask for more instructions and report more if you have any questions.
In the future, I will seriously abide by the attendance system, learn about the experimental analysis methods and petrochemical knowledge in the petrochemical industry, and strive to become a better all-round experimental analyzer and contribute to the development of the company.
Annual Work Summary of Quality Control Department II
In a blink of an eye, 20XX years have passed, and I have been with? Chuangcheng? * * * has gone through three spring and autumn periods, and then look back at the past year. Different from the past, this year I served as the manager of quality control department. This year, with the guidance, support and help of the company leaders and colleagues in the quality control department, I kept growing, and my management ability, team awareness and professional level were greatly improved. As the deputy manager of quality control department, my sense of responsibility is stronger. I realized that I am not only working alone, but also leading a team. In the past year, as the assistant manager of the quality control department, I have experienced ups and downs. My management experience is insufficient, the professional knowledge of the employees in the quality control department is not proficient, the quality of the personnel is uneven, and the work is not attentive, which leads to frequent quality accidents. These returns not only brought huge economic losses and immeasurable reputation losses to the company, but also brought relatively large economic losses to the leaders of XXX manufacturing headquarters and individuals in the quality control department.
Behind every quality accident, we have learned a great lesson. I led all the staff in the quality control department to summarize the experience and lessons of every quality accident, so as to lay a foundation for avoiding the occurrence of quality accidents in 20XX. This year, my team members and the production department did some small inspections because of product grading, which made our quality control department leave a bad impression on the production department, but we didn't flinch. I always insist. Responsible for product quality? It is a view of being responsible to the leader and the company. This year, I really matured a lot, learned a lot, learned to be strong, learned how to get out of confusion, learned to dare to face everything and so on. But I also know that I have many shortcomings, such as me? Too gentle to communicate well with subordinates? Wait, in 20XX, I will correct my own shortcomings and the shortcomings of the team to ensure the quality of XXX products.
20XX Work Plan A new year means a new starting point, new opportunities, new challenges and a new beginning. In 20XX, our company has built many new production lines, which need us to learn more. Therefore, I made the following work plan:
1. Take advantage of the off-season after the Spring Festival to organize all personnel in the quality control department to learn the new national standard knowledge and new production line detection methods.
2. Communicate with subordinates, understand employees' ideas, and fully mobilize the enthusiasm of employees in the quality control department.
3. Improve their professional knowledge, judge the product grade fairly and justly, and improve the quality awareness of the employees in the quality control department through words and deeds. Quality is life? This dogma applies to every product, and stick to it unswervingly.
4. Make full use of the pre-shift meeting in the off-season to find out the solutions to the problems encountered by employees in their daily work in time and convey them to every employee in the quality control department. With our experience and lessons in product quality in 20XX years, and the confidence of all the staff in our quality control department in product quality control in 20XX years, I believe that the product quality of XXX manufacturing headquarters in 20XX will reach a higher level.
Annual Work Summary of Quality Control Department III
I joined Lixin Electronics Co., Ltd. on July XX 1 1. With the close cooperation of the company's leaders and all my colleagues, I love my work, have a firm mind, and quickly integrate into the company's organization, and have successfully completed my own work and other work assigned by the leaders. I have been constantly adapting to the busy work, and I have gained a lot by the end of the year unconsciously.
First: performance.
Constantly understand and master the company's quality control policies and various quality control methods, strictly implement the company's quality policies, set an example everywhere, constantly improve their own quality awareness, supervise the operators to assemble in strict accordance with the work instructions, and be mainly responsible for finished product inspection and incoming inspection. When problems are found in the usual inspection, the person in charge or the person in charge of relevant departments can be notified in time to solve the problems in time.
Since joining the company, especially when shipping, it is difficult to order wooden cases and inspect them to ensure the quality of products. During this period, the procurement was completed in time, and the materials for inspection were sent many times, which did not meet the technical requirements of the factory. This task is both heavy and difficult. With the support of leaders and colleagues, these tasks can be successfully completed. What impressed me most was the 4-inch and 6-inch transmission guide sent by the processor. Quality management is also relatively weak, constantly requiring processors to implement according to our company's technological requirements, requiring them to conduct inspection and measure against drawings. In order to ensure the quality of the materials sent, although it is hard, it is also very gratifying to see the final work results.
Do your duty in your work, complete the tasks assigned by the leaders in time, and be familiar with various machines and assemblies under these pressures. After each link is completed, carry out aging test on the machine and submit the aging test report in time.
Strictly abide by and implement the company's rules and regulations and discipline requirements in work attitude, so as to go to work on time, not to be late, not to be absent from work, to obey the work arrangements of the leaders, to complete the tasks assigned by the leaders on time, not to be emotional, to perform their duties consciously, and to complete their work tasks seriously and actively.
Generally speaking, this year's work is hard and fruitful. Due to the shortage of assembly manpower, I actively assisted the production to complete the stocking and ensure the timely warehousing and delivery of finished products. I will take the next step, standardize management, long-term aging test of machines, standardize management test method reports, submit weekly reports in time every week, and assist in the preparation and management of departmental documents. In addition to completing my own work and the tasks assigned by the leaders, I will also actively cooperate with my colleagues to complete various tasks, which will improve the workflow of the department.
Second: the main harvest and experience.
After joining Lixin Electronics Co., Ltd., I learned a lot in my busy work and grew up constantly. Deepen the understanding of the company's materials and related machines. Because I have to inspect all kinds of raw materials and even assembly every day in production, I am more and more familiar with the characteristics of these materials. Before joining the company, I knew little or nothing about winding machines, but now I have a deep understanding of all kinds of winding machines in the company. I am familiar with all kinds of standards about winding machines, and I am also familiar with relevant inspection methods and measuring tools. At the same time, I have mastered the use of various measuring tools at work, can actually complete the inspection work, and have a more comprehensive understanding of quality management. At the same time, I constantly improve my quality awareness and promote the upgrading of products. I often encounter difficulties in my work. The deepest experience is that you can't be afraid of difficulties, and you can't finish your work because of difficulties. The most correct attitude is to face the difficulties, list them one by one, and come up with proper solutions. When other colleagues and other departments need to cooperate, they should learn communication skills so as to get help from others.
Third: shortcomings and areas that need improvement.
We have done some work this year and made some achievements, but there are still some gaps from the requirements of leaders and colleagues. For example, the company's main machines are ring machines and flat winding machines. However, they are unfamiliar with the commonly used specifications and inspection standards and lack experience, which will accumulate experience in the follow-up work and master the measurement methods and specifications, so as to further master the company and its key quality control points.
At the same time, we also find that some experiences are not perfect. There is no set of standard methods for reference, but they all need to be tested by work experience, which is often prone to loopholes. I hope it can be improved in the follow-up work.
I am determined to redouble my efforts in the follow-up work, carry forward the deficiency of customer service, do a good job with a down-to-earth and serious attitude, consult leaders and colleagues, learn from their good work experience, learn more about machines in my spare time, constantly improve my work skills and work ability, and become a satisfied employee of the company, leaders and colleagues.
Annual Work Summary of Quality Control Department IV
In a blink of an eye, XX years have passed, and I have been with? Chuangcheng? * * * has gone through three spring and autumn periods, and then look back at the past year. Different from the past, this year I served as the manager of quality control department. This year, with the guidance, support and help of the company leaders and colleagues in the quality control department, I kept growing, and my management ability, team awareness and professional level were greatly improved. As the deputy manager of quality control department, my sense of responsibility is stronger. I realized that I am not only working alone, but also leading a team.
As the deputy manager of the quality control department for one year, I have also experienced ups and downs. My lack of management experience, lack of professional knowledge of employees in the quality control department, uneven quality of personnel and lack of attention to their work have led to frequent quality accidents. These returns not only brought huge economic losses and immeasurable reputation losses to the company, but also brought relatively large economic losses to the leaders of xxx manufacturing headquarters and individuals in the quality control department. Behind every quality accident, we have learned important lessons. I led all the staff in the quality control department to summarize the experience and lessons of every quality accident, so as to lay the foundation for avoiding the occurrence of XX quality accidents. This year, my team members, I and the production department repeatedly had some minor grinding inspections because of product grading, which made our quality control department leave a bad impression on the production department, but we did not flinch. I always insist. Responsible for product quality? Is responsible for the leadership, responsible for the company.
This year I really matured a lot, learned a lot, learned to be strong, learned how to get out of confusion, learned to dare to face everything and so on. But I also know that I have many shortcomings, such as me? Too gentle to communicate well with subordinates? Wait, in XX, I will correct my own shortcomings and the shortcomings of the team to ensure the quality of xxx products.
;