Summary is a written material that comprehensively and systematically reviews and analyzes the study, work or its completion in a period. Writing a summary is conducive to the improvement of our study and work ability. Let's sum it up. How to write a summary so as not to be stereotyped? The following is my summary of cnc internship _ internship summary, hoping to help you.
Summary of Cnc Internship _ Summary of Internship 1 Time flies, and it has been more than three months since I arrived at the company in a blink of an eye. This is a precious experience in my life. During this time, my leaders and colleagues gave me great help in my work and great concern in my life, which made me fully feel the company's intentions. While I am in awe, I am also proud of the opportunity to become a member of the company. During these three months, under the care and guidance of leaders and colleagues, through their own efforts, all aspects have made some progress. Now I will report my work as follows.
First, pay great attention to learning from colleagues around us, pay more attention, see more, think more and learn more at work, get familiar with the company's situation at a faster speed and better integrate into our team.
Second, abide by the rules and regulations, work hard, and constantly improve their literacy. The professional ethics of love and dedication is the guarantee for the smooth development and ultimate success of every job. Since I joined the company for three months, I have been able to abide by the company's rules and regulations, do my job well, never arrive late and leave early, complete every task enthusiastically, actively and conscientiously, earnestly perform my post responsibilities, unite my colleagues in my daily life and constantly improve my team spirit.
Third, actively assist colleagues in this major to sort out and review the design defects and problems of drawings, and strive to check for leaks and fill gaps. Clear the technical obstacles for the general contractor's next entry work. At the same time, we have not relaxed the contractor who manages earthwork excavation and foundation treatment on site. Since the beginning of winter, the local government has stepped up environmental governance and put forward higher and stricter requirements for our work. We actively formulate measures to strengthen management and execution, so that the project can move forward actively and steadily.
4. Due to the need of work, I was seconded to the delivery team of 3AC2 stage as the leader of the delivery team of 12. For me, this is a brand-new field of work. After receiving the notice of secondment arrangement, I privately searched the relevant contents of the developer's notice of delivery on the Internet. Later, after several delivery training exercises, my confidence doubled. In the delivery work lasting 2 1 day, I successfully completed the acceptance work of 89 owners. This work experience has produced a lot of beneficial help to my current work, which has enabled me to understand and discover the weak points in the construction control of commercial housing products, as well as the key points to further improve the product details and use functions.
At work, I am good at thinking. When I find a problem, I will communicate with my colleagues first and share my solutions with them. If I can solve it, I will solve it. If I can't solve it, I will submit it to my superior manager and put forward my own opinions for reference. In short, after three months' probation, I think I can finish my work actively, actively and skillfully, find problems in my work, actively and comprehensively cooperate with the company's requirements, and cooperate and coordinate well with my colleagues. These days, I deeply felt the humanized management of the company, the vigorous motivation of the company, and the warmth and affection of caring for employees. At the same time, I hope to be affirmed by the company leaders and become a formal employee. In the future work, I will, as always, constantly improve my professional level and comprehensive quality, and contribute to the development of the company with my own practical actions.
Cnc probation work summary _ probation work summary 2 I entered the company on March 2, 20xx. After nearly a month's workshop practice, I was sent to Shanghai FASTCAM company for steel plate nesting training. After three days of training, I passed the exam with excellent results.
After I returned to the company, I took over Shao Gong's programming work in an all-round way and got started quickly, creating value for the company. Work content:
The first item is the programming of all steel plate parts in the company, including drawing verification and nesting programming. The working objects include: counterweight: QY8B, QY 12B, QY 16, QY20B, QY20, QY25, QY50, QUY260, QUY300 front crane, etc. Cab (control room): S 16D, S25E, S25K, etc. In addition, there are pump covers, special machine parts, battery boxes, tooling and so on. I will distribute the parts of these products to Koike plasma cutting machine, CEIBS plasma cutting machine and CEIBS flame cutting machine according to the thickness and production needs.
The second item is the collection of pipe clamp data and the compilation of quota. In this work, according to the warehouse list in ERP, I dismantled all the existing pipe clamp products in the warehouse, weighed the pipe clamp injection parts, measured the length and diameter of bolts, and recorded these data into the pipe clamp quota.
In the subsequent work of establishing the standardization of pipe clamp name and BOM (Bill of Materials) in ERP, I rearranged the types and application occasions of pipe clamp injection parts on the basis of quota data, and reclassified and named the pipe clamp plates in storage.
Recently, after the company introduced the steel pipe intersecting wire cutting machine, I am studying the use and programming method of the corresponding software to ensure production.
work experience
Preliminary work of programming and process control after programming.
First: strictly check the drawing size to avoid the discrepancy between the actual size and the marked size. Second: check whether the figure is closed, broken, repeated, isolated, square and so on. Thirdly, the name of cutting program is standardized, the purpose is to make the program systematic, easy to search, convenient for operators to use, and avoid using the wrong machine tools and plates.
Fourth, print the working instructions and cutting trajectory diagram of the cutting program. Print the work order as proof of the delivery of the program and provide the operator with the parts and quantity produced by the program. Cutting trajectory diagram includes plate, steel plate allowance, layout method, etc. And the names should be in series as far as possible, which is convenient for operators to distinguish.
Fifth, I followed the program according to the latest drawings. As long as the drawing changes, I will rewrite all the programs related to this drawing at the first time. For some drawings that are being changed, I remind the workshop to stop cutting temporarily.
In programming, I follow the three principles of saving cutting, cutting fast and cutting well, and the parts are directly proportional to the number of sets, which is helpful for the operators to work. First, the primary purpose of cutting steel plates is to improve the utilization rate of steel plates as much as possible, that is, there are more parts and less waste. This can create more benefits and save costs.
Under the condition of ensuring the reasonable proportion of cut parts, I will nest and typeset each group of parts that need typesetting several times or even dozens of times until I find the most reasonable and economical scheme.
At the same time: under the condition of ensuring the cutting quality to meet the production process requirements, adopting * * * edge cutting technology for some parts can produce more parts and improve efficiency compared with the common layout method. Taking the production of QY25K _ 03II-2A front bracket (t6) as an example, the highest utilization rate of common layout method is 75%, but after I cut it with * * * edges, the utilization rate is increased to 8 1%, so every time I cut 1800X8000X6 steel plates, 40.69 kilograms of steel plates are saved.
Thirdly, in order to arrange production on demand in the blanking workshop, I have written some different versions of programs involving small parts, so that if you need to cut small parts, you can call the programs of small parts; If you don't need to cut small parts or the production schedule is tight, you can use the program of cutting only the main parts.
Fourthly, make rational use of the symmetry of programming, that is, use the mirror image method of parts in CAD to make smaller scraps (scraps) merge into larger scraps, which can be reused.
Fifth, I pay attention to transfer my idea of nesting to the production workshop to help production. Because the steel plates used in the production of QY8B counterweight and QUY300 counterweight are all supplied by heavy-duty factories, I made a layout scheme close to the ideal state for our company to apply for steel plates. In the production of battery box, I carefully typeset the parts before buying the steel plate, and found that using the 2MM thick steel plate of1000x2xx would cause great waste, and the parts produced were out of proportion. However, if the 2MM thick steel plate of 1250X2500 is used, the utilization rate will be higher and the proportion will meet the requirements of the drawings, so I informed the director of the blanking branch in time.
The above is my summary of the work in the past year. Please correct me if there is anything wrong. Please correct my mistakes and shortcomings in my previous work. In the coming new year, I will continue to work hard as a programmer with high enthusiasm, complete other tasks assigned by the leaders, create benefits for the company and realize my own value.
Summary of cnc Trainee Work _ Summary of Trainee Work 3 Looking back, I have gained a lot this year. At the beginning of the year, I have been participating in the testing of Bank of China's banking system, and the Bank Fund Management System of Bank of China was successfully launched in February. Just after the Spring Festival, the whole process of intervention testing of the X-FUND2.0 project of xx Bank began. Follow the project team to Beijing for on-site development and testing, and cooperate with users for stress testing, internal drills and project support. At present, CITIC X-FUNDS2.0 system has also been put into production.
I returned to the company after August, mainly engaged in internal integration testing and system testing. The main test systems include Fujian Branch Cumulative System, SGE and K+ Interface Management System, xx Bank Interest Rate Derivatives Trading System, Shanghai Pudong Development Bank Offshore Trading System and China Bank New Generation Market Maker System. At present, we are busy testing the new generation market maker system, and the project is planned to be put into production at the end of the year.
Patch testing mainly includes patch testing of internal branch systems, patch testing of agency management systems of some BOC companies, patch testing of Macao fund management system and patch testing of CITIC X-FUNDS2.0 system.
Stress testing mainly includes CITIC X-FUNDS2.0 system, CITIC foreign exchange electronic trading system, unified login system, Shanghai Pudong Development Bank offshore system and new generation market maker system.
From the China Bank Company project at the beginning of the year to the X-FUNDS2.0 project of xx Bank and then to the new generation market maker project of China Bank. Each project has completed the test task and successfully put into production or is in progress.
Summarize the experience and lessons of major project testing and subsequent customer testing in this year, so as to better improve the quality of project intervention testing and improve their own capabilities and shortcomings.
First, there should be a plan within the test group. After getting involved in project testing, in theory, we should cooperate with the testing work of the project team. But I personally think that the work of the test team will be passive, and the tests specified by the project team cannot fully cover all or most of the functions of the system. If you update one piece, let you test one piece, so that other modules will be missed invisibly. The test team can also have its own test plan according to the overall work arrangement of the project, that is, the plan of complete test rounds, so as to better grasp the overall function of the system. This part of the work should communicate with the project leader when entering the customer site test, and clarify the daily workflow, such as version update time agreement, internal update test arrangement, and cooperation and guidance for user testing.
Second, the test schedule control of the project. Mainly in accordance with the project plan, according to the requirements of the project team plan to complete the test tasks, submit test-related documents, including the formulation of internal test plans, the improvement of test cases, the implementation of tests, defect tracking and BUG regression testing. Coordinate the internal testing of the project, cooperate with the project work and ensure the project quality. The problem tracking and handling of project testing adopts the mode of modifying the problem regression test every day, updating the problem tracking list synchronously every day, and completing the system update test according to the planned time.
Third, we should strengthen learning and communication. After entering the customer site for testing, testers should cooperate with the project team and guide and coordinate the customer testing. * * * Within the project team, we discussed the solution to the problem, learned the module function processing method from the heads of each module, learned the business knowledge points involved in the system from the business personnel, and combined them to carry out the module function test. Contact with customers to absorb new business knowledge and accumulate necessary business knowledge in the test, which are the test basis of company system test, or the literacy of bank financial industry project test. You can also improve your communication and coordination skills with customers and project teams. More reference to customer test cases and questions raised during the test can also lay a good foundation for your own testing work.
Fourth, be good at summing up and absorbing project experiences and lessons. Summarizing and reviewing the past project testing experience can better guide the future testing work and improve the discovery rate of system defects and unreasonable business processes. It will be easier to communicate with the project team about the problems in the test. In view of the previous project experience, we can also put forward some perfect opinions and function realization methods to the project team.
5. Personal gains and losses and shortcomings. As the person in charge of several project tests, his ability in daily test flow, test task assignment, test execution, defect tracking, coordination of internal test and customer test has been further improved, and the workflow of the test team in the whole project and the later project handover process has been clarified. At the same time, we have a further understanding of the corresponding business knowledge of the system. Relevant business knowledge needs to be further strengthened, and test skills and test management need to be further improved. Better absorb the project experience and do a good job in future patch testing and other project testing.
In project testing, it is difficult to allocate and manage the testing work coordinated by the maintenance department. Maintenance personnel are not very active in project testing, and the assigned tasks are unwilling to be completed. It can be clearly reflected in the CITIC X-FUNDS2.0 project and the new generation market maker project team. Most of them think that the work in the test process of the project team does not belong to their own responsibilities, and that it is just a simple coordination process, requiring overtime to either not come or do other irrelevant things. The project team also believes that maintenance personnel only do their own maintenance work and only complain to testers. The workload of project testing is also very large, and frequent overload work also brings great pressure to testers.
Whether the company can restrain and supervise reasonable internal testing by decentralizing part of the assessment ratio, and the test team leader will assess and score the work of testers and maintenance personnel in the group.
Whether the company should consider making a more reasonable project development and testing cycle plan and personnel distribution ratio, and effectively reduce the pressure brought by overload work.
The company's business is expanding year by year, and the testing department is seriously understaffed. The main testing work basically falls on several people in the department. I hope the company can reasonably replenish personnel next year and have a reasonable increase in wages and benefits.
;