Second place. 0 indicates 0 slots on the board.
Third place. 3 indicates the port on the slot.
G 1/0/3 stands for slot 0 and port 3 of 1 board.
Bai: displays the Gigabit Ethernet 1/0/ 1 interface, which is used to view the port information of the switch. The following commands provide a reference:
Displays the brief interface Gigabit Ethernet1/01to view the information to be configured for the port profile zhi.
The loopback test is displayed to test whether the loop test is turned on.
Display transceiver-information interface Gigabit Ethernet 1/0/50 displays information about optical ports.
Displays port security view port security configuration information.
Display garp statistics interface Gigabit Ethernet11Display garp statistics on Ethernet ports.
Extended data:
Port configuration
[H3C] Interface Ethernet 0/3
[H3C Ethernet 0/3] Shutdown
[h3c-Ethernet 0/3] Speed 100, which can be 10, 1000, 1000, automatic (default).
[H3C- Ethernet 0/3] Full duplex, which can be half duplex, full duplex and automatic (default) optical port, cannot be configured after convergence.
[H3C Ethernet 0/3] Flow Control Turn on flow control, which is off by default.
[h3c-ethernet0/3] Broadcast Suppression 20 sets the percentage of broadcast suppression to 20%, which can be 5,10,20, 100, and the default is 100, so multicast and unknown unicast can be performed at the same time.
Reference source; Baidu Encyclopedia -H3C Switch