(2) The fire prevention responsibility system shall be implemented step by step on the construction site, and there shall be special personnel at all levels.
(3) Conduct regular fire safety inspection, eliminate, rectify and stop the found fire hazards and some illegal phenomena, and take emergency measures for the fire hazards that are difficult to eliminate temporarily.
(4) Establish fire prevention files on the construction site and establish key fire prevention parts on the construction site.
(5) All kinds of fire signs should be posted on the construction site, fire doors, fire exits and alarm systems should be set up, obligatory fire brigades should be established, and facilities such as fully equipped fire-fighting equipment and emergency lighting devices can quickly put out the initial fire and effectively evacuate and transfer people and property.
(6) Popularize fire fighting knowledge to employees, train the use of fire fighting equipment, especially the key parts of fire fighting, and conduct special fire fighting training and assessment to make it regular and institutionalized.
(7) The fire-fighting equipment and fire hydrants on the construction site must be placed in an obvious position designated by the fire department.
(8) It is forbidden to connect the power socket without permission, pull the temporary wires randomly, dismantle and repair the switch, and replace the lamps, bulbs and fuses without permission.
(9) After the work, check the power off to ensure that all kinds of electrical appliances are not charged for the night, and all kinds of switches that should be closed are in the closed state.
(10) Fire-fighting volunteers shall be provided to conduct fire prevention inspection every day, and record and report any problems found in time.
(1 1) The obligatory fire inspector should be serious and responsible, leaving no dead ends in the inspection to ensure that there are no fire hazards.
(12) The construction personnel shall conduct a fire control self-inspection once a month, check the key fire control areas and key equipment, implement the system of fixed points, personnel and measures, and report the problems to the security department in time (written materials).
(13) inflammable and explosive dangerous goods are prohibited on the construction site.
(14) The quality of electrical equipment used must meet the requirements of fire control safety, and the installation of electrical equipment and the design and laying of electrical circuits must meet the safety technical regulations and be overhauled regularly.
(15) All fire-fighting equipment shall not be moved, damaged or misappropriated by anyone, and shall be inspected and replaced regularly.
(16) If safety problems or fire hazards are found, handle them in time and report to relevant departments.
(17) The inspection system should be implemented in the construction site. According to the patrol frequency in the population density survey, the hidden dangers are handled in time and recorded.
(18) Insist on regular fire prevention publicity and education, and publicize through various forms (such as blackboard newspaper, pictures, videos, etc.). ), popularize fire control knowledge, improve the fire safety awareness of construction site personnel, and enhance the consciousness of fire prevention work.