1. Before shifting gears, press the clutch to the bottom with your left foot.

2, palm down, five fingers hold the top of the gear lever.

3. To shift gears easily and accurately, you should use ingenuity instead of brute force to push the trend.

4. After U-turn, step on the accelerator and put into second gear. When you hear the sound, the next item is to step on the accelerator when changing gears, put your hand on the gear, engage the third gear after the ding sound, and slowly lift the clutch until it is completely released. When your foot releases the clutch, step on the accelerator immediately and put into fourth gear.

5. First of all, be sure to give full throttle when shifting gears, and make the next shift decisively after each shift.

Precautions for adding and subtracting files:

1. When shifting gears, the clutch must be trampled to death, and the wrong gear is prohibited.

2. The upshift can only be gradually upgraded, and the downshift can be skipped.

3, speed and gear must match, otherwise it will not only cause great damage to the vehicle, but also easy to stall.

The shifting skills of subject III are as follows:

1, there is basically no problem in starting the first gear, but most of the problems are that the second gear changes from three to three, and the fourth gear changes from three to three when shifting gears 100 meters. First of all, through the throttle brake control, the required speed should be reached when upshifting (above second gear 15, third gear 30, fourth gear 40); Downshift should be reduced to the required speed (lower than 3rd gear 35, 2nd gear 25 and 1st gear 20).

In this way, gear mismatch will not occur for a long time. Hold the gear lever with your hands when you engage the first and second gears. In addition to pushing it back and forth, there must be a force in one direction to pull it into your arms (you can imagine drawing a semicircle into your body). Switching between the first gear and the second gear does not need to go through the neutral position.

2. When changing the second gear to the third gear, first pick the gear to neutral, then don't hold the gear lever and put it in gear, hang your palm, and push the gear lever forward with your palm and put it in the third gear. When shifting from third gear to fourth gear, push the gear lever backwards with your palm.

3. When shifting from the fourth gear to the third gear, hang your palm upward, and push the gear lever forward with your palm to shift to the third gear, and then shift the third gear to the second gear. Hold the gear lever to select neutral, draw a circle to your body, and put in second gear. During the whole shift process, pay attention to oil separation and hand type. Hold the shift lever in the first gear and the second gear, and push it with your palm in the third gear and the fourth gear.

4. If you need to use the fifth gear, choose the fourth gear in the same way and draw a circle to the upper right.