(2) When loading and unloading the workpiece, changing the tool, measuring the machined surface and changing the speed, first stop the machine.
(3) When the lathe is running, it is forbidden to touch the surface of the workpiece by hand, especially when machining threads, so as not to hurt your hands. It is forbidden to wipe the rotating workpiece with cotton yarn.
(4) Use a special iron hook to remove chips, and do not remove them directly by hand.
(5) Don't wear gloves when operating on the lathe.
(6) The billet can't extend too long from the end of the spindle hole. After bending, a material rack or baffle should be used to prevent injury.
(7) Don't stop the rotating chuck by hand.
(8) Don't disassemble electrical equipment at will to avoid electric shock.
(9) If machine tools and electrical equipment are found to be faulty during work, they shall be reported in time and repaired by professionals. Do not use it without repair.
Extended data:
Matters needing attention in winter:
(1), pay attention to prevent paralysis.
The weather is changeable, and people's hearing, vision, movements and emotions are beginning to be affected to a certain extent, and their thoughts are easy to relax. Once they don't pay enough attention to it, their work is ineffective, their responsibilities are not implemented, and their supervision is not in place, it will lead to great disasters. Therefore, it is necessary to improve employees' ideological understanding, strengthen warning education, strictly implement the responsibility system for production safety, earnestly strengthen management linked to leaders, implement responsibilities, and promote the steady improvement of employees' production and working conditions.
(2), pay attention to fire and explosion.
Things that are air-dried in winter are dry and prone to fire and explosion accidents. According to their own reality, organize regular investigation and management of fire hazards, carefully check the integrity and effectiveness of fire fighting equipment in this department, and eliminate fire hazards in time.
(3), pay attention to antifreeze
When the temperature is below zero degrees Celsius, it is necessary to do a good job in the anti-freezing of equipment and vehicles, such as wrapping straw bags or ropes around water pipes, gates and other equipment exposed outdoors, and discharging the accumulated water in the pipes and equipment in time to prevent the equipment from freezing and affecting production. In addition, it is necessary to prevent employees from frostbite.
References:
Safe production _ Baidu Encyclopedia