Model essay on work summary of workshop technicians (1)
The tense 20X years have passed, and the past year can be said to be an extraordinary year. As a technician in the workshop, with the care and support of workshop leaders and comrades, I have made due contributions to the enterprise through hard work. In the past year, I set high standards for myself in my work and life and did a lot of work. The work of the past year is summarized as follows:
First, carry forward the spirit of teamwork in the work and strive to complete the production tasks of the workshop.
1, in my usual work, I should first do my daily work well. I have both division of labor and cooperation with other technicians in the workshop, insist on regular work exchanges with other technicians, fully carry forward democracy, put an end to arbitrariness, unify my thoughts and steps, and successfully complete various production tasks in the workshop. 20X cooperates with other technicians every year, and reasonably arranges minor repairs and nozzle changers, and changes X sets and more than a dozen varieties according to the spinnability of the workshop.
2. According to the spirit of industry association, the company requested the parking in the north area of workshop X in July of 20X. Cooperate with other technicians to do the usual process treatment and alkali string work during parking, report the problems encountered in the work to the workshop leaders in time and arrange relevant personnel to solve them. Start the car in North District in September, make good preparations for start-up, do a good job in process treatment, and adjust all process parameters in place in advance to ensure the success of start-up and product quality.
3. Due to the long-term spinning of wood paddles in X workshop, there are many waste wires in the godet wheel, and the spinnability is poor. I often communicate with the technicians in the stock solution workshop to reflect the spinnability of the workshop and with the technicians in the functional office, hoping to improve the spinnability by changing the paddle ratio. This year, the company adopted a variety of paddle and paddle mixing methods, which greatly improved the spinnability. The full cylinder rate has increased from less than 80% to about 85% now.
4. Summarize the production situation of the workshop once a month and submit it to the technical department in time; Summarize the consumption of main materials in the workshop and submit them to the planning department in time. Do a good job in statistics and technical analysis, analyze the abnormal situation in workshop production, take corrective measures, and write a corrective action report.
Second, complete the compilation and printing of the work instruction of X workshop.
Every year, according to the arrangement of the enterprise management office, each workshop is required to complete the revision of the work instruction. The new work requirements are compiled according to the requirements of the three-in-one system, and I have a clear division of labor with other technicians, so that the new work instruction contains the contents of environment and occupational health, which is more suitable for practical operation. In March, the work instructions were distributed to employees in time, and the work of changing the edition of the work instructions was successfully completed.
Third, carefully arrange employee training to improve the theoretical level and professional level of employees.
Doing a good job in employee training is the long-term unremitting work of our workshop. For this reason, our workshop has specially formulated a training system, requiring each team to organize employee training at least twice a month and carry out various forms of employee training. For new workers who change jobs, a master-apprentice contract is required, and they can work independently only after passing the examination of technicians. In May this year, employees were organized to make a knowledge answer sheet of the three-in-one system, which strengthened their understanding of the knowledge of the three-in-one system. We also use our spare time to organize employees to learn the knowledge of the three-in-one system, so that employees can better understand the company's policies and objectives and lay a good foundation for the company's internal and external audit. Cooperate with the teams in each section to do a good job in the technical competition of young workers and improve the practical operation skills of employees. Strengthen the study of new work instructions, and organize all employees in our workshop to have a theoretical knowledge test on June 5438+ 10 this year. Improve the theoretical knowledge of employees. Class four workers insist on the second morning shift, because class four spinners are the key positions to control product quality in the workshop. At ordinary times, we attach great importance to the study of spinning workers' technological knowledge, so that employees can understand the main processes that affect product quality and tell them repeatedly, especially the bobbin with brittle broken wires brought back by the general manager after visiting customers in June, so that employees can personally feel the losses caused by brittle broken wires to users, how to avoid brittle broken wires at work, and always sound an alarm to employees to enhance their sense of responsibility at work.
Four, according to the requirements of the three-in-one system, do a good job of workshop certification, and promote the effective operation of the three-in-one system in the workshop.
In the past year, we actively promoted the effective operation of the three systems in our department, earnestly studied relevant management and technical knowledge, strengthened the study of procedure documents and management manuals, strengthened the understanding of standards, formulated our annual audit plan according to the requirements of internal audit procedures, and organized our internal audit work as planned. In March this year, we organized relevant personnel in the workshop to re-identify and improve the hazards and environmental factors in the workshop. In May, the internal auditors of other brother departments and relevant functional offices were invited to conduct internal audit of the department, put forward improvement suggestions for the problems raised by others during the audit process, and promoted the continuous improvement and perfection of the trinity management system of the department to meet the annual internal audit and external audit work of the company. Contact and communicate with the comrades in the certification office, play the role of bridge and link, and convey, explain and implement the company's management policy and the company's relevant requirements in quality/environment/occupational health and safety management to our workshop staff and relevant personnel who come to visit our workshop. And decompose the company's objectives and indicators, formulate the objectives, indicators and management plans of this department, and convey them to employees in time.
Work plan for 20X years: I should have new goals and requirements for myself in the new year. In the future work, I will work harder and live up to the trust of the leaders.
Model essay on work summary of workshop technicians (2)
After I was appointed as an electrical instrument workshop technician, I began to gradually enter this role. Although I once worked as an electrical equipment clerk in X Pharmaceutical Co., Ltd., I have a deep understanding and mastery of high and low voltage electrical technology and equipment. But since I came to X new construction site, I feel that the pressure of being a qualified electrical instrument technician is increasing in the process of electrical supervision. There are mainly the following reasons: first, the company has a large number of electrical equipment; Second, there are many kinds of electrical equipment, involving high and low voltage transmission, distribution, transmission and electrical maintenance; Third, the mixing of old and new equipment increases the probability of electrical equipment failure and the difficulty of troubleshooting; Fourthly, a new 1 10KVA substation has been built, which is something I have never been exposed to; Fifth, I haven't been engaged in instrument work for three or four years, and I must relearn the knowledge I missed before.
This year's work content:
First, the daily work content
(1), clavulanic acid oral aseptic workshop centrifuge, under the condition of full material, can't start. I went to check and found that the centrifuge was too heavy to start. The output power of frequency converter can't overcome this torque, and the centrifuge can't start. After understanding the working reason, I reset the starting torque of the inverter and put in DC braking resistor, which extended the starting time and ensured the normal use of the centrifuge.
(2) When the frequency converter of boiler workshop 1# induced draft fan stops normally, it will always report "Stop and Overcurrent". After my analysis, I found that when parking, the operator stopped too fast and stopped too fast, and did not gradually reduce the frequency. In order to solve this problem completely, I installed a DC reactor for the inverter and set the parameters of the DC reactor, which solved this problem from the technical level. In addition, in order to ensure the normal operation of the equipment, I also explained the normal startup procedures and precautions of the equipment to the operators in the boiler workshop.
(3) The pressure of the thin film evaporator in the first workshop of clavulanic acid refining is always high, which can't guarantee the normal operation of production. After consultation with Bai Yang, I suggest adopting frequency conversion control mode. Manually control the equipment pressure to ensure the stability of production. Finally, we installed frequency converters for 8 thin-film evaporators, and after a period of operation, it was determined that the effect reached the expected requirements.
These are just a small part of my daily work. Such sudden accidents often happen. When I need to deal with them, I am always the first to come to the scene, and try my best to troubleshoot the workshop as soon as possible and restore the normal operation of the equipment.
Second, technological transformation.
(1). In July, the main circuit of the frequency conversion control cabinet of 304# large tank of clavulanic acid fermentation was technically reformed, and the load circuit of 4# transformer was changed to 1# transformer. Reduce the load of 4# transformer. Before the transformation, the maximum load of the 4# transformer can reach more than 4000A, which is more than 15% higher than the rated current of the transformer, which seriously threatens the safe operation of the 4# transformer and leaves great hidden dangers for the normal production of the workshop. In this regard, under the unified leadership of the workshop, we put forward a plan and carried out the above transformation after feasibility demonstration. Through transformation, the load of 4# transformer can be maintained at 3200A in high production stage, which ensures the safety of equipment and achieves the expected effect of transformation.
② August,1&; Mdash: The electrical control loop of the drum and induced draft fan of 4# boiler was reformed in a chain way. Boiler workshop1& mdash; 4# boiler is the old equipment demolished by Dayao. The old drum induced draft fan has no electrical control chain. In production, when the induced draft fan stops due to an accident and the blower continues to run, it may cause the boiler to backfire, thus causing injuries to equipment and personnel. In this regard, in the absence of drawings, I measured the electrical circuit of drum and induced draft fan motor control frequency conversion cabinet in the boiler workshop, and finally found the way of chain control. With the cooperation of the electrical maintenance team, I completed the transformation and achieved the goal of transformation.
Third, staff training.
Training employees has always been one of the main tasks of the workshop. The technical level of employees is related to the efficiency of workshop maintenance equipment. I have also done a lot of work in this regard.
Model essay on work summary of workshop technicians (3)
Time flies, 20X years have passed quickly, and a brand-new year will be ushered in. Looking back on this year's work, when I was the monitor of Class 4 in X workshop, I devoted myself to my work and completed all the production tasks assigned by the workshop on time with good quality and quantity. Take the lead in observing the company's rules and regulations, strictly manage the team, perform well in team building, have a harmonious team atmosphere and have a harmonious relationship with other teams. Abnormal emergencies at work are dealt with in time. March 16 compressor tripped and stopped, 100#600# emergency stop. In the process of treatment, we try our best to recover economic losses for the company and prevent environmental accidents. Leakage is found in the work and handled in time. During the shift on April 18, it was found that the lining of the four-way pipe of the distributor of kettle A on the first floor was leaking, which was serious. At the first time, t06 1 1ab decreased, and kettle a was stopped urgently. If this kind of accident cannot be found in time and handled correctly, it will cause serious corrosion of equipment and lead to shutdown and affect the overall production.
I carefully check the shift, actively organize the shift meeting, and summarize the production situation on duty. Earnestly complete every work assigned by the leader in the work, actively share the worries for the superiors, urge the team members to abide by the company's rules and regulations, set an example, take the lead in setting an example, do a good job in production with the team members, and better complete the tasks in charge of the class. Supervise the team members to make work records every day, operate in strict accordance with the operation methods, strive for stable production operation and normal analysis and control indicators, and handle abnormal situations in time. On-site inspection requires careful patrol inspection according to the inspection route, and report any leakage immediately. Assign team work, fully mobilize the enthusiasm of team members, deepen mutual trust among team members, and do a good job in team unity.
In the first half of this year, according to the needs of the company's production department, I went to the dispatching room to study, focusing on the work of this workshop and assisting the dispatching to carry out daily work. During the dispatching room, I got a certain understanding of the technology of the whole factory through the study of the equipment in each workshop. Through the combination of theoretical study and field work, I remembered the parameter number of main equipment, the direction and characteristics of material pipeline. Have a certain understanding of the user distribution and material consumption of water, electricity and gas in the whole company. Understand the responsibilities and authority of the dispatcher, and pay attention to the change of ph value of circulating water. Learn the emergency plan of the whole company. Learned how to send production information to leaders and record the data of output consumption in each workshop.
Through continuous study and progress, I gradually improved my quality and skills. I learned a lot in the dispatching room and gained a lot of insights.
Thanks to the trust of Director X and company leaders, I was promoted to X after 10 months.
As a workshop technician, combined with many years' working experience of X workshop monitor, with the help of workshop leaders and colleagues, I have performed my duties as a technician well. When I first took office, I felt a heavy burden on my shoulders. In the past, a monitor managed a team, but now I have to cooperate with the director to manage the whole workshop. Since I took office, I have completed various parking and maintenance plans in June165438+1October, and added two compressors for technical renovation piping, assisted outsourcing companies in issuing fire protection certificates, and arranged daily piping plans and application materials. Busy work every day makes me feel that my work life is more fulfilling. After more than one month of equipment installation, process piping, equipment pressure test and leak detection, and compressor trial operation, before the start-up of 65438+February 65438+August 100#600# the day before yesterday, the new X compressor was linked to start-up and the start-up was a complete success.
Summing up the work in the past year, there are still many shortcomings in the work. In the future, we should improve our ideological quality, improve detail management and basic management, and better complete the tasks assigned by the company. Under the leadership of the workshop director, the focus of next year's work is: 1, safety and environmental protection work, basic management to a higher level. 2. Carefully organize workshop production and do a good job of energy saving and consumption reduction. 3, pays special attention to the product quality work, timely tracking analysis index. 4, strictly grasp the site management, promote the site management work to a higher level. I will make persistent efforts in the future, as always, be brave in innovation and do my job well. Arrange all aspects of work reasonably, strengthen the management of three disciplines in the workshop, strive to create a harmonious atmosphere, maintain the good mental state of employees, and ensure the safe and stable operation of the device. Contribute to the development of the company.
Model essay on work summary of workshop technicians (4)
As a technician in the power supply workshop of the Ministry of Mechanical and Electrical Engineering, based on his post, while doing a good job in the technical task of power supply up and down the mine, he focused on mastering his own power supply system business, improving his technical level, actively participating in various trainings, constantly expanding his knowledge, applying advanced technology and combining his own professional knowledge, and applying power supply technology to coal mine safety production.
First, actively learn technology and strive to improve their professional level.
In July of X year, under the leadership of relevant departments, I went to Jiyuan Explosion-proof Equipment Factory in Henan Province for investigation and study, mastered the new technology and new process of new equipment, and actively discussed and communicated with my peers. Subsequently, relevant technicians from manufacturers and Nandian Chen Guo were invited to our mine to provide training on the application and maintenance of electrical equipment for power supply workers, and gave technical guidance to relevant technicians of our company on the spot, which solved many technical problems. I recorded the problems I encountered in my usual work and asked the masters in the power supply workshop until I understood them. Whenever the relevant technicians of the factory come to the mine to solve the major equipment failure, I actively seek their advice. Through continuous study and practice, I gradually became familiar with the application of underground power supply system and high and low voltage equipment, and improved my professional level.
Second, reasonably design the power supply system and scientifically formulate technical measures.
Under the guidance of the section chief in charge of power supply, I gradually designed the power supply system of each coal mining face. Because I am not familiar with the working face and its mechanical equipment, in order to arrange the route of high and low voltage cables reasonably, I often go to the scene, measure the distance, set up calculations scientifically, and choose electrical equipment and cable models reasonably, which not only meets the actual needs, but also saves a lot of manpower and material resources. I designed 8 17 1, 7 198, 7 196, 7 174(2), 8 172, 7 199, etc. Based on the principle of "one project, one measure", I will formulate technical measures for construction safety in advance, strictly organize and scientifically formulate them, in addition to the maintenance of high and low voltage electrical equipment twice a month, as well as the laying or recycling of high voltage cables, equipment installation and standardization, so as to make the safety technical measures scientific and operable. After being approved by the leaders of relevant departments, it will be communicated to each construction worker, and signed before construction, and strict measures will be implemented, so that the measures can really play the role of supervision and guidance in the whole process of prevention. In addition, I also assist the workshop director to make equipment maintenance and material plan, and put forward technical measures to prevent electromechanical accidents.
Third, the task of safety and quality standardization has been fruitful.
In order to implement the quality standardization work issued by the mine, according to the situation that the power supply team arranges and hangs cables in the main tunnels and substations underground according to the standardization requirements, this paper puts forward reasonable suggestions and formulates scientific technical measures for safe construction. In X years, I mainly participated in the following major projects: Ⅱ (3) Installation of the upper substation in the mining area and laying of its power supply lines; Installation of belt electric control system in belt concealed inclined shaft: Dongsan and Donger (3) installation of electric control and signal system of frequency conversion winch in mining area; Installation of power supply system in underground 8 17 1, 7 198, 7 196 and other coal mining faces; Installation of power supply system of large-scale fully mechanized excavator in -750 heading face: installation of power supply in -750 line workshop and transformation of power supply system of mining team; Main shaft substation replacement transformer, etc. By participating in these large-scale projects, I guided the technical work and further studied, laying the foundation for better power supply in the future.
Four, do a good job, improve the skill level of workers.
In daily work, according to the changes of the upper and lower high and low voltage power supply systems, the power supply system diagram is revised in time, so as to know the load of each substation at any time and be responsible for the maintenance of the underground remote monitoring system. At the same time, I recalculated the setting parameters of the high-voltage relay protection device in the mine and counted the high-voltage and low-voltage cables in the mine. Under the guidance of system leaders, we organize electricians to carry out skills training from time to time, learn new technologies, improve theoretical and cultural level and operational skills, and often organize skills competitions, and actively carry out activities such as "qc group" and "finger dictation operation method". Through these training activities, the professional level of workshop electricians and their ability to deal with switch faults have been continuously improved, which has greatly shortened the time to deal with accidents and effectively guaranteed the safe power supply of the whole mine.
Model essay on work summary of workshop technicians (5)
The past year can be said to be an extraordinary year. As a technician in the workshop, with the care and support of workshop leaders and comrades, I have made due contributions to the enterprise through hard work. In the past year, I set high standards for myself in my work and life and did a lot of work. The work of the past year is summarized as follows:
1. Strengthen the study of political theory and technical knowledge, and comprehensively improve their political and cultural quality and professional level.
In one year's work in X, I followed the pace of the times, strengthened the study of theoretical knowledge, and strived to achieve new improvement in understanding and new gains in application, thus achieving the purpose of guiding practice, promoting work, and improving work level and service ability. At the same time, I studied Comrade Hu Jintao's socialist concept of honor and disgrace, lived in accordance with the requirements of eight honors and eight disgraces, and wrote it into regular newspapers in time, actively moving closer to the party organization, and striving to become a * * * party member at an early date. In the work, I constantly learn new technologies and processes, constantly enrich myself, and constantly improve my technical level to guide my work.
2. Carry forward the spirit of teamwork in the work and strive to complete the production tasks in the workshop.
1, in my usual work, I should first do my daily work well. I have both division of labor and cooperation with other technicians in the workshop, insist on regular work exchanges with other technicians, fully carry forward democracy, put an end to arbitrariness, unify my thoughts and steps, and successfully complete various production tasks in the workshop. X cooperates with other technicians every year, and reasonably arranges minor repair machines and mouth changing machines according to the spinnability of the workshop, and the number of spinning changes reaches 465,438+03 sets and more than a dozen varieties.
2. According to the spirit of the trade association, the company requested that the North Zone of Wusi Workshop be shut down in July of X year. I cooperated with other technicians to do a good job in process treatment and alkali stringing at ordinary times, and reported the problems encountered in the work to the workshop leaders in time and arranged relevant personnel to solve them. Start the car in North District in September, make good preparations for start-up, do a good job in process treatment, and adjust all process parameters in place in advance to ensure the success of start-up and product quality.
3. Due to the long-term spinning of wood paddles in the five-wire workshop, there are many waste wires in the godet wheel, and the spinnability is poor. I often communicate with the technicians in the stock solution workshop to reflect the spinnability of the workshop, and also communicate with the technicians in the functional office, hoping to improve the spinnability by changing the paddle ratio. This year, the company adopted a variety of paddle and paddle mixing methods, which greatly improved the spinnability. The full cylinder rate has increased from less than 80% to about 85% now.
4. Summarize the production situation of the workshop once a month and submit it to the technical department in time; Summarize the consumption of main materials in the workshop and submit them to the planning department in time. Do a good job in statistics and technical analysis, analyze the abnormal situation in workshop production, take corrective measures, and write a corrective action report.
3. Complete the compilation and printing of the operation instruction of the fifth filament workshop.
Every year, according to the arrangement of the enterprise management office, each workshop is required to complete the revision of the work instruction and write new work requirements according to the requirements of the three-in-one system. I have a clear division of labor with other technicians, so that the new work instruction includes environmental and occupational health aspects and is more suitable for practical operation. In March, the work instructions were distributed to employees in time, and the work of changing the edition of the work instructions was successfully completed.
4. Carefully arrange employee training to improve the theoretical level and professional level of employees.
Doing a good job in employee training is the long-term unremitting work of our workshop. For this reason, our workshop has specially formulated a training system, requiring each team to organize employee training at least twice a month and carry out various forms of employee training. For new workers who change jobs, a master-apprentice contract is required, and they can work independently only after passing the examination of technicians. In May this year, employees were organized to make a knowledge answer sheet of the three-in-one system, which strengthened their understanding of the knowledge of the three-in-one system. We also use our spare time to organize employees to learn the knowledge of the three-in-one system, so that employees can better understand the company's policies and objectives and lay a good foundation for the company's internal and external audit. Cooperate with the teams in each section to do a good job in the technical competition of young workers and improve the practical operation skills of employees. Strengthen the study of new work instructions, and organize all employees in our workshop to have a theoretical knowledge test on June 5438+ 10 this year. Improve the theoretical knowledge of employees. Class four workers insist on the second morning shift, because class four spinners are the key positions to control product quality in the workshop. At ordinary times, we attach great importance to the study of spinning workers' technological knowledge, so that employees can understand the main processes that affect product quality and tell them repeatedly, especially the bobbin with brittle broken wires brought back by the general manager after visiting customers in June, so that employees can personally feel the losses caused by brittle broken wires to users, how to avoid brittle broken wires at work, and always sound an alarm to employees to enhance their sense of responsibility at work.
5. Do a good job of workshop certification according to the requirements of the three-in-one system, and promote the effective operation of the three-in-one system in the workshop.
In the past year, we actively promoted the effective operation of the three systems in our department, earnestly studied relevant management and technical knowledge, strengthened the study of procedure documents and management manuals, strengthened the understanding of standards, formulated our annual audit plan according to the requirements of internal audit procedures, and organized our internal audit work as planned. In March this year, we organized relevant personnel in the workshop to re-identify and improve the hazards and environmental factors in the workshop. In May, the internal auditors of other brother departments and relevant functional offices were invited to conduct internal audit of the department, put forward improvement suggestions for the problems raised by others during the audit process, and promoted the continuous improvement and perfection of the trinity management system of the department to meet the annual internal audit and external audit work of the company. Contact and communicate with the comrades in the certification office, play the role of bridge and link, and convey, explain and implement the company's management policy and the company's relevant requirements in quality/environment/occupational health and safety management to our workshop staff and relevant personnel who come to visit our workshop. And decompose the company's objectives and indicators, formulate the objectives, indicators and management plans of this department, and convey them to employees in time.
Related articles:
1. Model essay on personal work summary of technicians 5.
2. 5 essays on the latest personal annual work summary of workshop technicians.
3. Five excellent model essays summarized by technicians' personal work.
4. The annual work summary, a factory technician, choose 5.
5. The personal work summary of technicians includes 5 articles.