In the light simulation exam, you should be careful not to focus on the exam screen. Look ahead, wait for the machine to report the problem, and then use the lighting suitable for the simulated scene.
After the first level, you can hit the road. At this time, it depends on applying what you have learned in driving school according to the road conditions. On-road subjects include driving in a straight line, using appropriate gears, changing lanes, and passing through schools or bus stops.
When you return to the starting point, stop the car, pull the brake, go back to neutral, loosen the seat belt, and then open the door once, not too much. I got off the bus the second time I opened it.
Subject 3 has two chances, and don't lose heart at the first failure.
Subject 3 is to drive on the road, and the purpose of study is to prepare for driving on the road. We drive on the road most of the time, so it is very important to learn subject three well.
When studying, the coach will start with the most basic projects such as starting and shifting gears, and the coach will sit in the co-pilot to guide and protect safety. So when you start studying, don't be nervous, you must relax. The exercises generally include: getting on the bus, simulating lighting, starting, driving in a straight line, shifting gears, changing lanes, stopping by the side, going straight through the intersection, turning left (right) at the intersection, crossing the crosswalk, crossing the school district, crossing the bus station, overtaking, turning around, etc. After reading so many projects, in fact, each project is interrelated, which is what we usually use on the road. When practicing, you must be careful and listen carefully to the coach's explanation and precautions.
1. Prepare for boarding: In fact, the first thing to do after boarding is to adjust the seat to suit your position, adjust the inside and outside rearview mirrors, fasten your seat belts, check whether all the lights are in their original positions, report when you are ready, and conduct night lighting simulation. Night lighting simulation must remember that if the simulated lighting test fails, it will be too bad if the car fails before it starts. So be sure to remember it carefully.
2. Start: Start steadily. Be familiar with the gear and clutch of the vehicle when practicing, because the clutch tightness and height of each test vehicle are different. Before starting practice, get into the habit of feeling the tightness and height of the clutch. Before starting, change the clutch from 1 to 4 to find the feel. Then, step on the clutch, shift into the first gear, Zuo Zuo turn signal (be sure to exceed 3 seconds), and turn left to observe the left rearview mirror at the same time. After confirming the safety, whistle, put on the parking brake, start smoothly and adjust the turn signal. But be careful not to slide backwards when you start on the ramp.
3. Turn at the intersection: When turning at the intersection (turning left or right), please turn on the right (turning left) turn signal (for more than 3 seconds) after the voice prompts "Turn right (turning left) at the intersection ahead", and then press the guide arrow to turn right (turning left) to the lane.
4. U-turn: After hearing the voice prompt "Please turn around ahead", turn on the left turn signal (more than 3 seconds), observe the traffic situation at the left rear through the left rearview mirror, and then slow down, shift to a low gear and drive into the U-turn area after confirming safety. Pay attention to the U-turn area, observe the left and right road conditions, drive into the new lane, and turn off the turn signals after confirming safety.
5. Grasp the speed when driving in a straight line: the speed of driving in a straight line should not be too slow. A little higher speed is more conducive to customs clearance. Remember not to drive too slowly, so it is easy for the car to go sideways. If you feel that the car is off course, you should adjust the direction immediately, but the steering wheel should not be too isolated and can only be fine-tuned, otherwise it will fail.
6. Go straight through the intersection: when you hear the voice prompt "Go ahead through the intersection", you should slow down (brake), observe the traffic situation on both sides of the road, and drive according to the signal light. When crossing the intersection, the speed should be less than 30km/h, and parking is prohibited in the intersection.
7. Passing through the bus station: When passing through the bus station, you should slow down, the speed should be less than 30 km/h, turn around and observe, and pay attention to avoid bus vehicles and pedestrians.
8. Add and subtract gears: Add and subtract gears quickly and accurately. After hearing the sound, shift the gear to the second gear, and then increase it from the second gear to the fifth gear in turn. The speed should be greater than 40km/h in the fifth gear, and then shift down to the second gear in turn. Pay attention to step on the clutch first when shifting gears, and keep the gear stable. Don't hesitate to step on the clutch when shifting gears.
9. Meet this car. When passing by, pay attention to the oncoming car and drive on the right side of the car until the meeting is over. Pay attention to avoid other vehicles when passing by, and don't press the non-motorcycle lane line.
10. Overtake. Turn on the left turn signal (more than 3 seconds) after hearing the sound, and observe the traffic situation at the left rear through the left rearview mirror. After confirming safety, you can turn left and drive into the left lane to overtake. After overtaking the overtaken vehicle, turn on the right turn signal (more than 3 seconds) after confirming to keep a safe distance from the overtaken vehicle. At the same time, observe the rear vehicles through the right rearview mirror and drive into the original lane after confirming safety. When overtaking conditions are not available, you can wait until conditions permit to complete overtaking, and overtaking on the right side is prohibited.
1 1. lane change: when you hear the sound, turn on the left turn signal (for more than 3 seconds) and observe the traffic situation in the rear through the left rearview mirror. Turn left after confirming safety. Slow down when the conditions are not met, and then change when the conditions are ripe. It is strictly forbidden to continue to change two lanes.
12. Passing through the crosswalk and the school area: When passing through these two places, slow down. Before entering this area, the vehicle speed should be less than 30km/h, observe from left to right, pay attention to avoid pedestrians, and pass only after confirming safety.
13. Pull over: After hearing the sound, turn on the right turn signal (more than 3 seconds) and observe the traffic situation at the right rear through the right rearview mirror. After confirming the safety, put the parallel letters on the right side of the car within 30 cm from the red on the right side of the road, but not on the solid line on the roadside. When the letters are stable, pull the hand brake and empty the gear.
Precautions for the exam:
1, you must first understand and be familiar with the examination room before the exam.
2. The general test requires driving in the third gear, and the speed should be kept at about 30km/h, not less than 20km/h and higher than 60 km/h. ..
3. The shifting action should be in place and accurate.
4. Keep a safe distance from the car in front, especially when driving in a straight line and accelerating the road. Keep your eyes away.
5, good mentality, too nervous, easy to forget the essentials of action, peace of mind, do what you should do.
6. If you make a mistake in the exam, the system will not prompt you, it will not affect driving on the road, and the examiner will not brake. Don't panic. If the vehicle speed is high, step on the brakes and shift gears in time if the gears are wrong.
After the new regulations, the difficulty of subject three has increased a lot, the make-up exam rate has also increased, the number of make-up exams has increased, and the probability of failing subject three has also increased. Subject three is becoming more and more important in our driving test career. Faced with this situation, how can we practice subject three well?
Lighting operation
After the new regulations, lighting is more difficult. When we simulated the lights, we couldn't get the password. After the voice broadcast is completed, there is still 5 seconds to respond. Only when we think clearly can we operate the lighting. Turn signal on the road, you must operate after three seconds.
Drive in a straight line
After the new regulations, the difficulty of driving in a straight line has also increased. When training in a straight line, don't hold the direction too tightly with your hands. You must find a reference point for training on the road, and adjust the direction slightly when you feel that the direction is a little off.
Drive to the roadside
It has always been very important for subject 3 to pull over, and the failure rate is very high. When training, you must sum up and experience carefully, adjust your seat when you get on the bus, find the reference point on your wiper, and train repeatedly.
Process details
The subject three exam is a process, and there are many details in this process. Our subject three exam is to complete all the details of this process. Be sure to memorize all the procedures and details skillfully before the exam.
Simulated site
There was a mock venue exam before subject three, and now the difficulty of subject three has increased. This simulation site is actually necessary. If you are not confident enough before the exam or your psychological quality is not very good, you can go to the simulation venue.
A cool check
Driving test needs to be faced frankly, but it is easier said than done. However, since you have chosen the driving test, you should train carefully during the training, try to adjust your mentality during the test and face the test in the best state.
Subject three is a headache for many candidates. In addition to some mistakes, students are also required to have solid driving skills and flexible use of some skills, as well as the ability to improvise, overcome psychological pressure, be familiar with the examination content, and pass the third subject.
Be familiar with the contents of subject 3 exam, including what items:
First, get ready to get on the bus. Go around the car first, observe the surrounding environment of the car, get on the car after confirming safety, adjust the seat rearview mirror, fasten the seat belt, and check the brake, gear position, lighting and engine status.
Second, simulate the lighting, master the use of all kinds of lighting, be careful not to worry when taking the exam, and wait until the sound is finished before lighting. Listen carefully to the pronunciation.
3. Start: Before starting, observe whether the doors are fully closed, observe the traffic situation in the rear through the rearview mirror, and start after confirming safety. Turn on the left turn signal, press the release brake and gently lift the clutch. It is required that the start-up process should be stable, without shaking, slipping back and flameout.
Fourth, turn left. After hearing the command to turn left at the intersection, turn on the left turn signal, observe the surrounding traffic conditions at the same time, and pass slowly after confirming safety.
Five, through the crosswalk, crossing the crosswalk requires slow passing when the speed is lower than thirty (twenty-five-six).
Six, add and subtract gears, step by step to add and subtract gears, not trip stop, according to the order of 23432, at the same time, the speed should match the gear, do not shift gears immediately after the completion of adding and subtracting gears, and then shift gears after hearing the sound of the next item.
7. Drive in a straight line, keep the vehicle driving in a straight line direction, don't swing in a big direction, and try to increase the speed when the speed matches the gear.
8. overtaking. Overtaking here is just an overtaking action. Vehicles must travel from the outside lane to the inside lane. Pay attention to the use of turn signals and turn the steering wheel for more than three seconds, and at the same time try to increase the speed.
Nine, the school area, through the school area, reduce the speed to below 30, no honking.
Ten, hear the sound of the past, slow down, at the same time, the vehicle to the right. If there is a variable lane on the right, turn on the turn signal and change lanes to the right.
1 1. Turn around, turn on the left turn signal, slow down, observe the vehicles on the opposite road, and make sure there is speed to pass after it is safe.
Twelve, lane change, after hearing the sound of lane change, observe the left and right vehicles, change lanes to the left or right according to the situation, and turn on the turn signal in advance.
Thirteen, go straight through the intersection, the speed is lower than 30 and pass at a constant speed.
Fourteen, through the bus station, the speed is not more than 30.
Fifteen, turn right at the intersection, turn right, slow down and turn right.
16. Pull over, turn on the right turn signal and observe the situation of the right rear car, slow down and approach the right edge line, and stop smoothly. The distance between the car body and the edge line is not more than 30 cm, and the wheels cannot press the edge line.
Turn on the turn signal after parking, pull the hand brake, take the neutral position, and then unfasten the seat belt after uploading the results, otherwise it will be considered that the seat belt is not fastened properly.