1. When the car is driving at night, it is necessary to check the working condition of the instrument in a timely manner. When driving at night, check the dashboard mainly by listening and looking, and observe whether there are any abnormal sounds or smells in the engine and chassis. Keep driving at a moderate speed, pay attention to increase the distance behind the car, and be prepared to stop at any time to prevent collision accidents between the front and rear cars.
2. In the city, pay attention to pedestrians crossing the road from the left. When driving at night, low beam lights should be used when the vehicle speed is below 30 km/h, and the light should illuminate 30 meters away. When the vehicle speed is above 30 km/h, high beam should be used and the light must illuminate 100 meters away. If some stones, bricks, branches and other objects appear on the road without warning, you should apply the brakes lightly as soon as possible, change lanes, and keep your foot on the brake pedal. These objects may be warning objects. Not every car is equipped with a warning tripod. They can only use these objects to remind the driver behind them. If they see them, there may be a broken down car parked not far ahead.
3. When meeting another car, switch the high beam to low beam. This is driving etiquette and also to improve driving safety. Remember, you must switch, and at the same time be mentally prepared to accept that the other party does not switch. It's not that the other party doesn't know how to do it, it's that the other party has forgotten it or did it intentionally. These people will also switch at first, but if they switch too much, they cannot gain the respect of the other party. Over time, they also develop the habit of not switching. For this kind of vehicle, don't complain, let alone "harm each other". If something goes wrong, it won't be good for anyone.
4. When driving on a road with street lights, you can use anti-glare lights or low beam lights and width lights. When driving through an intersection at night, you should slow down 50-100 meters away from the intersection. And change the high beam to low beam, and turn on the turn signal to indicate the direction of travel. For the sake of safety at night, many truck drivers have installed two high-power searchlights in addition to the original high beams. When illuminated by them, their eyes are covered with white flowers and they cannot see anything. When driving on a national highway, be sure to put your feet on the brake pedal and be ready to brake at any time. When overtaking, you need to be alert and ensure that there are no vehicles in the opposite lane for a relatively long distance. Once you find that something cannot be done, apply the brakes in time and return to the original driving route.
5. When driving at night, the horn is generally not used. Instead of warning the road conditions ahead, the high and low beams are usually interchanged repeatedly. When driving at night and making a temporary stop or parking for any reason, you should always turn on the width indicator light and license plate light. When driving at night, you should try to avoid overtaking. When overtaking is necessary, you should accurately determine the situation ahead. After confirming that the conditions are mature, you should follow up with the vehicle in front, continuously change the far and near lights (cooperate with the horn if necessary), and warn the vehicle in front to avoid it. After determining that the vehicle in front is correct, You can only overtake when you have given way and allow overtaking. When overtaking, you should increase the distance between vehicles appropriately.
6. The road is filled with trucks of all sizes at night. When the trucks are fully loaded, the cargo sometimes covers the tail lights and can only be seen when you are very close. When driving at night, you must consciously reduce the speed and control the speed. 70~80 when driving during the day. While driving, if conditions permit, stay farther away from the truck. When you need to overtake a truck, in addition to switching the light reminder, you should also honk the horn to attract the attention of the truck driver. When overtaking a single truck, you should be crisp and clear, and be willing to step on the accelerator; when you need to overtake trucks continuously, especially when they are driving in different lanes and there is only a small gap between the front and rear, you must be alert and reserve enough space.