The structure of the engine, chassis and cab of a dump truck is the same as that of a general truck. Dumpers can be divided into two types: backward tilting and sideways tilting. The working principle is that the piston rod is controlled by the control system. Backward tilting is more common. Pushing the piston rod causes the car to tip over, and several cars tip over in two directions. High-pressure oil enters the lifting hydraulic cylinder through the distribution valve and oil pipe, and there is a cab safety protection plate at the front end of the carriage. The engine drives the hydraulic pump through the transmission and power take-off, and the hydraulic tilting mechanism of the carriage consists of an oil tank, a hydraulic pump, a distribution valve, a lifting hydraulic cylinder, a control valve and an oil pipe.
The hydraulic tilting mechanism of carriage consists of oil tank, hydraulic pump, distribution valve, lifting hydraulic cylinder, control valve and oil pipe.
2. What are the model parameters of dump trucks?
1, vehicle model: CQ3240TF33
(1) container length (mm) 4800
(2) Container width (mm) 2360
(3) container height (mm) 1235
(4) Total mass (kg) 24,000
(5) Tire size: 1 1.00-20.
2. Vehicle model: CQ3243TF2G324
(1) container length (mm) 4800
(2) Container width (mm) 2360
(3) container height (mm) 1235
(4) Total mass (kg) 24,000
(5) Tire size: 1 1.00-20.
3. Vehicle model: CQ3240T5F9G324
(1) container length (mm) 44 10
(2) Container width (mm) 2360
(3) container height (mm) 1350
(4) Total mass (kg) 23900
(5) Tire size: 12.00-20
4. Vehicle model: CQ3243TF2G384
(1) container length (mm) 5400
(2) Container width (mm) 2360
(3) container height (mm) 1 140
(4) Tire size: 1 1.00-20.