1, code 0x 0000000 @ hrpl NNT Lers _ or _ dqu @ l
◆ Failure analysis: It is mainly caused by driver failure, defective or incompatible software and hardware. From a technical point of view, this shows that in kernel mode, IRQL is too high to access memory addresses that it has no access to.
◇ Solution: Please use the 2, 3, 5, 8 and 9 solutions mentioned above to eliminate them as much as possible.
2. 0x000000 12: trap _ cause _ unknown
◆ Error analysis: If you encounter this error message, unfortunately, the result of KeBudCheck analysis is the cause of the error.
Unknown.
Solution: Since Microsoft can't help you, you have to rely on yourself. Please carefully recall when this error occurred; What did you do to the system when it first happened? What happened when it happened? Find out the possible reasons from this information, then choose the corresponding solution and try to eliminate it.
3.xp blue screen code 0x000001a: memory _ management.
Error analysis: This memory management error is often caused by hardware, such as newly installed hardware and memory itself.
Solution: If it appears when installing Windows, it may be because your computer cannot meet the minimum memory and disk requirements for installing Windows.
4、0x 000000 1E:KMODE _ EXCEPTION _ NOT _ HANDLED
◆ Error analysis: The Windows kernel has detected an illegal or unknown process instruction. This shutdown code is generally caused by a memory failure or a reason similar to the previous 0x0000000A.
◇ Solution:
(1) Hardware compatibility problem: Please check whether all the hardware is included in the latest hardware compatibility list mentioned above.
(2) Problem device driver, system service or memory * * * * and interrupt * * * *: If the name of the driver appears in the blue screen information, please try to enter it in warehouse 0D#. Or disable or delete drivers in the recovery console and disable all newly installed drivers and software. If the error occurs during system startup, please enter security xJ? Rename or delete the file indicated in the blue screen information.
(3) If the error message clearly indicates that Win32K.sys is probably caused by a third-party remote control software, you need to close the software from the fault recovery console.
(4) When you restart for the first time after installing Windows, the biggest possibility is that the disk space of the system partition is insufficient or there is a problem with BIOS compatibility.
(5) If it happens when a software is shut down, it is likely that the software has saved design defects, please upgrade or uninstall it.
5、0x00000023:FAT_FILE_SYSTEM
0x00000024:NTFS_FILE_SYSTEM
◆ Error analysis: 0x00000023 usually occurs when reading and writing the system partition of FAT 16 or FAT32 file system, but
0x00000024 is due to an error in the NTFS.sys file (the function of this driver file is to allow the system to read and write.
NTFS file system disk). These two blue screen errors are probably caused by the physical damage of the disk itself or the damage of the interrupt request packet (IRP). Other reasons include: too many disk fragments on the hard disk; File reading and writing operations are too frequent, and the amount of data is very large, or due to some disk mirroring software or anti-virus mattresses.
An ingenious solution:
Step forward: first open a command prompt and run' chkdsk/r' (note: it's not CHKDISK, it feels like this, but ...) to check and repair hard disk errors. If bad tracks are reported, please use the inspection tools provided by the hard disk manufacturer to check and repair them.
Step 2: Then disable all software that scans files, such as antivirus software, firewall or backup tools.
Step 3: Right-click the file C: winntsystem 32 drivers astfat.sys and select "Properties" to see if its version matches the version of Windows currently used in the system. (Note: If it is XP, it should be C:windowssystem32.
Driver astfat.sys)
Step 4: Install the latest motherboard driver, especially IDE driver. If your optical drive and removable storage also provide drivers, you'd better upgrade to the latest version.
6. 0x00000027:RDR file system
Error analysis: it is difficult to determine the cause of this error, but a problem with Windows memory management is likely to lead to the appearance of this stop code.
Solution: If it is because of memory management, usually increasing memory can solve the problem.
7. Blue screen code 0x0000002EATA_BUS_ERROR
◆ Error analysis: System memory parity errors are usually caused by device drivers accessing nonexistent memory addresses in defective memory (including physical memory, secondary cache or graphics card memory). In addition, the hard disk is damaged by virus or other problems, which leads to this shutdown code.
◇ Solution:
(1) Check for viruses
(2) Use the "chkdsk /r" command to check all disk partitions.
(3) Check the memory with memory test software such as Memtest86.
(4) Check whether the hardware is installed correctly, such as whether it is firm and whether the golden finger is stained.
8. 0x00000035: There are no more IRP stack locations.
◆ Error analysis: Literally, there should be a stack problem in the driver or some software. In fact, the real cause of this failure should be a driver problem or a memory quality problem.
◇ Solution: Please use the solution related to driver and memory in the conventional solution introduced earlier.
9、0x0000003F:NO_MORE_SYSTEM_PTES
Error analysis: errors related to system memory management, such as: memory management problems caused by a large number of input/output operations: defective drivers use memory resources incorrectly; An application (such as backup software) is allocated a lot of kernel memory.
◇ Solution: Uninstall all newly installed software (especially those applications and antivirus software that enhance disk performance) and drivers.
10, Blue Screen Code Stop: 0x00000044: Multiple _ IRP _ Compile _ Requests
Error analysis: generally caused by hardware drivers.
◇ Solution: Uninstall the recently installed driver. This kind of failure rarely happens. What is known at present is that it is in use.
1 1、0x00000050:p@fd^f@tlt^hn_nonpagdd+@rea
◆ Error analysis: This error may be caused by memory failure (including indoor memory, secondary cache and video memory), software incompatibility (mainly remote control and antivirus software), NTFS volume damage and hardware failure (such as PCI card itself damage).
Solution: Please use related solutions such as memory, software, hardware and hard disk. In the conventional solution introduced earlier.
Line exclusion.
12, 0x0000005 1: Registry error.
◆ Error analysis: This shutdown code indicates that there is an error in the registry or system configuration manager. Due to the physical damage of the hard disk itself or the problem of the file system, an input/output error occurred when reading the registration file.
◇ Solution: Use "chkdsk /r" to check and repair disk errors.
13、0x 00000058:ft disk _ INTERNAL _ ERROR
◆ Error analysis: It indicates that the main driver of the fault-tolerant set has an error.
◇ Solution: First try to restart the computer to see if it can solve the problem. If it can't, try' last correct configuration' to solve it.
14、0x 0000005 e:CRITICAL _ SERVICE _ FAILED
◆ Error analysis: It is caused by a very important system service startup logo.
Solution: If new hardware is installed, you can remove it first, check whether it is compatible with Windows 2K/XP through the online list, and then start the computer. If the blue screen still appears, please use Last Known Good Configuration to start Windows. If it still fails, it is recommended to repair, install or reinstall.
15, 0x0000006F: Session 3 _ Initialization-Failed.
Error analysis: This error usually occurs when Windows starts, which is usually caused by driver failure or system file corruption.
◇ Solution: It is recommended to use Windows to install 9 L6T or above? Maintenance and installation of the system.
16, 0x00000076ROCESS process has locked the page.
◆ Error analysis: It is usually because a driver has completed an input/output error. The occupied memory has not been released correctly.
◇ Solution:
Step 1: Click Start-> Run: regedt32, find [HKLMSystemCurrentControlSetControlSession Manager], and create a new double-byte value' TrackLockedPages' on the right. The value is 1. Therefore, when the error reappears, Windows can track which driver has a problem. Step 2: If the blue screen appears again, the error message will become: stop: 0x00000000cb (0xY, 0xy, 0xy) driver _ left _ locked _ pages _ in _ process The fourth' 0xy' will be displayed as a problem-driven name, and then it will be updated or deleted. Step 3: Enter the registry and delete the added "TrackLockedPages".
17, 0x00000077: kernel stack page error.
◆ Error analysis: It means that the required kernel data is not found in virtual memory or physical memory. This error often means that there is something wrong with the disk and the corresponding data is destroyed or eroded by the virus.
◇ Solution: Scan the system with antivirus software; Use the "chkdsk /r" command to check and repair disk errors. If not, use the disk manufacturer Sb Fortune Giant Tea to repair them.
18、0x 0000007 a:JERNEL _ DATA _ in page _ ERROR
Error analysis: This kind of error is often caused by the fact that the kernel data in virtual memory cannot be read into memory. The reasons may be that there are bad clusters, viruses, disk controller errors and memory problems in the virtual memory paging file.
◇ Solution: First, use the antivirus software upgraded to the latest virus database to kill virus. If there is no information, return 0xC000009C.
Or 0xC0000 16A code, then it is caused by a bad cluster, and the disk detection tool of the system cannot automatically repair it. At this point, you should enter the "Recovery Console" and use the "chkdsk /r" command for manual repair.
19, 0x0000007B: the boot device cannot be accessed.
◆ Error analysis: Windows cannot access the system partition or boot volume at startup. It usually happens when the motherboard is replaced for the first time, mainly because the IDE controller of the new motherboard and the old motherboard use different chipsets. Sometimes it may be caused by virus or hard disk damage.
◇ Solution: Generally, start the computer with the installation CD, and then repair and install it to solve the problem. For viruses, you can use DOS antivirus software to kill them (the main battle is to download kv2005DOS version). If there is something wrong with the hard disk itself, please install it on another computer, and then use' chkdsk /r' to check and repair the disk error.
20、0x 0000007 e:SYSTEM _ THREAD _ EXCEPTION _ NOT _ HANDLED
◆ Error analysis: The system process generates an error, but the Windows error handler cannot catch it. There are many reasons for this, including: hardware compatibility, faulty drivers or system services, or some software.
◇ Solution: Please use Event Viewer to get more information and find the root cause of the error. (it seems that finding is not the way. It seems that people here are going to be self-reliant! )
2 1, 0x0000007F: unexpected _ kernel _ MOED _ trap
Error analysis: Generally, it is caused by the failure of hardware (such as memory) or some software. Sometimes overclocking can also produce this error.
◇ Solution: Check the memory with test software (such as Memtest86). If overclocking occurs, please cancel overclocking. Pull out the PCI hardware card from the motherboard slot or replace the slot. In addition, after overclocking, some motherboards (such as nForce2 motherboards) will lead to blue screen due to overheating of the South Bridge chip, so adding a separate heat sink for this chip can often effectively solve the problem.
22. 0x 00000080:NMI _ Hardware _ Fault
Error analysis: generally caused by hardware. (It seems that the blue screen is inextricably linked with hardware errors. )
◇ Solution: If new hardware has been installed recently, please remove it, and then try to replace the slot and install the latest driver. If the driver is upgraded, please restore the original version; Check whether the memory golden finger is polluted or damaged; Scan for viruses; Run "chkdsk /r" to check and repair disk errors; Check that all hardware cards are plugged in. If all the above attempts fail, you'll have to ask a professional computer repair company for help.
23. 0x0000008E: Kernel mode exception not handled.
Error analysis: kernel-level applications have errors, but Windows error handlers have not caught them.
⑴ Solution: Upgrade the driver or BIOS.
24. 0x0000009C: Abnormal machine inspection.
Error analysis: usually caused by hardware. Generally, it is due to overclocking or hardware problems (memory, CPU, bus, electricity).
Source).
◇ Solution: If overclocking, please reduce the original frequency of CPU and check the hardware.
25. 0x0000009FRIVER Drive _ Power _ Status _ Fault
◆ Error analysis: It is often related to the power supply, and it often happens in the operation related to the power supply, such as shutdown, standby or sleep shutdown.
◇ Solution: reinstall the system. If it cannot be solved, please replace the power supply.
26. 0x0000000A5: ACPI _ BIOS _ error.
◆ Error analysis: It is usually because the motherboard BIOS cannot fully support the ACPI specification.
◇ Solution: If there is no corresponding BIOS upgrade, when the prompt' If you need to install a third-party SCSI or RAID driver, please press F7' appears when installing Windows 2K/XP, so that Windows will automatically prohibit the installation of ACPI HAL and install standard PC HAL.
27、0x 000000 B4:VIDEO _ DRIVER _ INIT _ FAILURE
◆ Error analysis: This stop message indicates that Windows cannot enter the graphical interface because it cannot start the graphics card driver. Usually there is something wrong with the graphics card or the hardware (such as parallel port or serial port).
◇ Solution: Enter the safe mode to see if the problem is solved. If possible, please upgrade the latest graphics driver. If not, it is likely that there is a * * * between the graphics card and the parallel port. You need to press WIN+break in safe mode to open System Properties. In terms of hardware->; Locate and double-click the project connected to the printing LPT 1 port in the Device Manager, uncheck "Use Automatic Configuration" in the Resources tab, and then change "03BC" in the Input/Output Range to "0378".
28. 0x000000BE: Try to write to the read-only memory.
◆ Error analysis: A driver tries to write data into read-only memory, usually after installing a new driver, system service or upgrading the firmware program of the device.
Solution: If the error message contains the name of the driver or service file, please uninstall or disable the newly installed driver or software according to this information.
29、0x000000C2:BAD_POOL_CALLER
Error analysis: a process or driver in the kernel layer mistakenly tries to enter the memory operation, which is usually caused by a bug in the driver or software.
◇ Solution: Please refer to the related items of the conventional solution mentioned above for elimination.
30 0x 000000 ceriver _ UNLOADED _ WITHOUT _ canceling _ PENDING _ OPERATIONS
Error analysis: It is usually caused by the wrong driver or system service.
◇ Solution: Please refer to the related items of the conventional solution mentioned above for elimination.
3 1, 0x 000000d 1 IRQL river
◆ Error analysis: It is usually caused by a faulty driver (for example, Logitech MouseWare 9. 10 and Logitech Mouse's 9.24 driver will cause this failure). At the same time, it is also caused by software that needs to be written into memory (such as multimedia software, antivirus software, backup software, DVD player software).
Solution: Check the latest installation or * take that tape? If a file name similar to' acpi.sys' appears in the blue screen, it can be very certain that there is something wrong with the driver and software; Test whether there is a problem with the memory; Enter the "recovery console", enter the partition where the virtual memory page file Pagefile.sys is located, and execute the "del pagefile.sys" command to delete the page file. Then execute the' chkdsk/r' command in the partition where the page file is located; Reset virtual memory after entering Windows. If you encounter this blue screen while surfing the Internet, and you are just downloading and uploading a lot of data (such as online games and BT downloads), there should be something wrong with the driver of the network card and you need to upgrade its driver.
32、0x 000000 ea:THREAD _ STUCK _ IN _ DEVICE _ DRIVER
◆ Error analysis: Generally, it is caused by the video card or the video card driver.
◇ Solution: Upgrade the latest graphics driver first. If not, you need to replace the graphics card to test whether the fault will occur again.
33、0x 000000 ed:UNMOUNTABLE _ BOOT _ VOLUME
◆ Error analysis: Generally, it is caused by an error in the disk. Sometimes it is suggested to check whether the hard disk connection is in poor contact, or the connecting cable that meets the hard disk transmission specification is not used. For example, ATA- 100 or ATA-33 cable doesn't matter to the low-speed hard disk, but tell the hard disk (supporting ATA-66 or above) that the requirements are stricter, and the cable with incorrect specifications may sometimes lead to this situation that it can't be started. If it's fixed,
◇ Solution: In general, restarting will solve the problem. In any case, it is recommended to execute the' chkdsk/r' command to check and repair the hard disk.
34. 0x000000F2: Hardware) Interrupt _ Storm
◆ Error analysis: The kernel layer detects that there is an interruption storm in the system, for example, a device does not release its occupation after completing the operation.
Excuse me. Usually this is caused by a defective driver.
Solution: Upgrade or uninstall the newly installed hardware driver.
35. 0x00000 135: Unable to locate DLL.
Error analysis: It usually means that the file is lost or damaged, or there is an error in the registry.
Solution: If the file is lost or damaged, the corresponding file name will usually be displayed in the blue screen information. You can find the corresponding files through the network or other computers and copy them to the SYSTEM32 subfolder under the System folder. If the file name is not displayed, the registry may be corrupted. Please use System Restore or a previous registry backup to restore it.
36. 0x000002 1A: status _ system _ process _ terminated.
◆ Error analysis: The user-mode subsystem, such as Winlogon or customer service runtime subsystem (CSRSS), is damaged, and the security can no longer be guaranteed, resulting in the system being unable to start. Sometimes, when the system administrator mistakenly modifies the permissions of the user account, the user account will not be able to access the system files and folders.
◇ Solution: Hold your back with the' last p'? If it doesn't work, you can use the installation tray to repair your work.
37. STNP 0xC000022 1 or status _ image _ checksum _ does not match.
◆ Error analysis: Generally, it is caused by the damage of drivers or system DLL files. It usually appears on the blue screen.
filename
◇ Solution:
(1) Use the Windows installation CD for repair and installation;
(2) If you can still enter the safe mode, you can' start->' Run': sfc /scannow
(3) You can also use the method of decompressing files to enter the' recovery console' and use the copy or expand command to copy or decompress damaged files from the CD. However, the blue screen is generally a driver file problem, so the expand command will be used in some aspects, such as the blue screen prompts tdi.sys file, because the driver file is generally in the i386driver compressed package. So use: expand% cdrom: i386driver.cab: TDI.sysc: winntsystemdrivers. (XP is expanding% cdrom: i386driver.cab: TDI.sysc: Windownsystemdrivers).