※ Unlocking mode:

Press the green key, double-click the green key, single-click the red key, double-click the red key and single-click the+-key;

Press the white key, double press the white key, single press the camera key, double press the camera key;

※ Lock mode:

Double-click XM key, single press red key, double press red key, single press+-key and double press white key;

Note: the key of 1 "+-"means pressing the area in the middle of the volume+-",or pressing+-at the same time, instead of pressing+or-alone;

The red, green and white keys of 2.2. Unlike 5800, N97 and 5530 may not support unlocking.

2. Support for adding and unlocking custom sound effects;

The volume can be adjusted, the sound files can be freely selected, and MP3, WAV and AAC formats are supported. ※:

You can choose the sound mode: On, Off, Unlock Only and Lock Only. ※:

※ It can automatically synchronize with the scene mode, and automatically turn off the sound effects of "Mute" and "Buzzer"!

※ Fixed volume or automatic synchronization with current ringtone volume can be selected.

3. Support whether to shield the self-contained sideslip key;

You can choose whether to turn on the sideslip key, or turn on "lock" or "unlock" respectively. ※:

Select "No" to shield the sideslip key, beginners should use this function with caution! ※! So as not to cause trouble that cannot be unlocked!

4. Multi-sensor unlocking: (Note: repeated unlocking is prohibited within 1 second)

Double-click-tap or shake rhythmically in the specified direction twice. ※:

? You can choose to tap in X, Y and Z directions (note: vibration of external speakers may cause tapping in Z direction).

? . You can select On, Off, Unlock Only and Lock Only;

? . The "reaction time" and "interval time" of tapping can be adjusted by default or as required;

? . Several methods to realize double-click:

1) Put the 5800 on the palm of your hand, tap it twice or play it twice with your fingers, which requires a certain sense of rhythm.

2) Hold 5800 in one hand and slap the outside of the finger twice with the other hand, which is similar to the action of "clenching fist";

3) Hold the 5800 and pat the palm or thigh with the side twice in a row, not too hard and not too fast;

4) Hold the 5800 and shake it vertically or horizontally twice along the side direction. The recommended rocking angle is 30.

? . (Note: The direction definitions of N97 and 5800 may be different. The sensitivity under the new firmware is too sensitive, so use it with caution. )

Fixed direction-* * supports free combination and selection of 4*6 directions. (Refer to chart) ※

? . You can select On, Off, Unlock Only and Lock Only;

? It is recommended to use a combination of 2-3 directions, such as "vertical left"+"vertical up";

? Pause each action for 0.5- 1 sec, and the interval between two actions shall not exceed 2 seconds;

Custom gestures-* * * supports 4*360 gestures at any angle, which can be automatically "recorded" or edited manually. ※:

? Optional modes: On, Off, Unlock Only and Lock Only;

? . Click "Options" and "Start Action Recording", pose the mobile phone, and press the camera button once (or in the menu) to save the current coordinates.

Save up to 4 actions in turn, and then you can use the currently saved consecutive gestures as a way to add and unlock.

? . Edit the coordinates manually, and the format is described as follows: 1. 133.33.33.

The first one stands for changing the action switch, ON = 1, OFF = 0；; The last three are the coordinates representing the x, y and z axes.

If it is greater than 100, it means a negative number, such as 133 = -33.

? If you don't need to start an action, change the first bit to 0.

? It is recommended to use 2-3 posture combinations and adjust the appropriate sensitivity, which is quite useful.

Distance sensing-you can sense unlocking and play magic without touching the mobile phone. ※

? . You can select On, Off, Unlock Only and Lock Only;

? The "distance sensor" is located between the 5800 receiver and the front camera and is a black rectangle;

? Manual bite mode: this position can be unlocked by continuous and rapid "bite" and "release" of fingers, and the popular explanation is "friction";

? . You can set the sensitivity (interval time of each shielding) and the number of times you need shielding;

? Automatic occlusion mode: namely "pocket lock", which can automatically lock and unlock when putting in/taking out the pocket;

? . Automatic unlocking and locking time can be set respectively, that is, the time of losing occlusion and keeping occlusion;

? Automatically turn off the occlusion sensor and unlock it during the call, take photos and play videos, without affecting the normal use;

5. Free sliding to unlock:

Ultra-high degree of freedom, visual editing sliding interface, full of personality, arbitrary. ※:

※ Perfect integration with various original unlocking methods of Mykeylock, and trigger mode can be specified;

※ You can customize the background and slider picture, support multiple formats, and the slider supports PNG transparency effect;

Custom sliding position, sliding at any position and angle to unlock, adjustable sensitivity. ※:

You can choose a fixed straight line or slide freely in different modes, and you can decide the horizontal and vertical inclination. ※:

※ You can customize the "Personal Signature" of the sliding unlocking interface, and choose not to display it;

※ The position, color and transparency of time characters can be customized;

※ You can customize how many times you slide to automatically unlock the keyboard;

※ Slide the unlocking interface to select whether to directly press and hold it to unlock;

※ Sliding unlocking interface can display signal and electric quantity;

The successful sliding unlocking has the dynamic effect of text movement. ※:

Visual editing method of sliding unlocking interface. ※:

1) Open Mykeylock, and select Options-Settings-Slide Unlock-Options-Unlock Interface Editing;

2) Drag the time, date or slider displayed on the screen, and put it in the position you like;

3) Click anywhere on the screen and select "Save Text Location" in the menu;

4) Select "Set slider start position" to save the starting point of sliding, otherwise save the ending point;

5) The two red boxes on the screen represent the start and end areas of the slider;

6) Finally, click "Return"-"Finish".

7) Then trigger sliding unlocking, and drag the slider to the end area to unlock;

8) If fine-tuning is needed, you can also manually modify each coordinate in the settings;

6. "burglar alarm" (based on the principle of distance induction)

※ You can choose whether to turn on the quick switch-double-click "+-"(note: the anti-theft function needs to be turned on first to be effective);

Turn on the anti-theft, lock the keyboard, put it in the pocket, and enter the anti-theft state within the set time. ※,

Once it is taken out, it will call the police if it is not unlocked within the set time, and the response is very sensitive;

※ When this function is turned on, when the mobile phone is locked and kept shielded for n seconds,

Will start anti-theft detection, and at the same time send out a prompt sound; At this time, once the mobile phone occlusion disappears,

Then an alarm is given after m seconds, the keyboard is unlocked, and the alarm is lifted.

If there is a phone call when the anti-theft is turned on, you can answer it with confidence and the program will automatically cancel the alarm. ※,

When the conditions are met, it will automatically turn on the anti-theft.

Where n seconds stands for "anti-theft preparation time (0-5 seconds)" and m seconds stands for "alarm trigger time (0-5 seconds)". ※

Turn on the burglar alarm and you can choose the burglar alarm yourself. The burglar alarm will be played automatically in the program. ※:

The volume can also be adjusted by yourself, and the intervals n and m can also be set by yourself.