There are many types of wallpaper on the market now. Self-adhesive wallpaper is a material that has only emerged in recent years. More and more people are buying it now, because it is relatively simple to lay. And convenient. But many friends have encountered problems when laying them. In fact, as long as you pay attention to the method of laying the lower paving, you can also achieve a good decorative effect. So what is the best way to apply self-adhesive wallpaper? What are the advantages of self-adhesive wallpaper? Next, let us take you to find out.

What is the best way to apply self-adhesive wallpaper?

1. On-site inspection signature

Check whether the wallpaper purchased is complete and consistent with the purchased quantity. Check whether the construction accessories are complete. Such as rubber powder, glue, protective tape, etc. It is necessary to pay attention to whether the wallpaper and glue have "F certification standard" certification. "F certification standard" is currently a globally recognized high environmental protection level. This standard can only be achieved by bonding with solid wood and formaldehyde-free glue.

2. Check the wall quality

The construction wall is required to be clean, strong, flat, dry, with moderate water absorption and neutral pH. Check whether the wall meets the above requirements. Generally, after the wall is painted with interface agent (moisture-proof material), it must be naturally dried for more than 15 working days.

3. Do a good job in ground maintenance

Usually when laying wallpaper, tiles or floors have already been laid on the ground. It is recommended to lay a layer of plastic film on the ground before laying wallpaper. Laying a film can prevent glue from falling directly to the floor, thereby protecting the floor.

4. Measure the dimensions again

Measure the dimensions of the wall to get the required amount of wallpaper. The width of the wallpaper excluding the protective edge is the shortest effective distance of the wallpaper. The position from the top of the wall to the baseboard is the height of the paving, which is also the shortest effective distance of each wallpaper.

5. Start wallpaper cutting

When cutting wallpaper, the single piece needs to be larger than the actual wall length, usually about 10 centimeters apart. The rest of the wallpaper can be saved for later repairs. If a complete wall has an extra area (such as a beam), this area is usually not paved, and the effect is good.

6. Soften the glue on the wallpaper

Use a scraper to apply glue evenly on the back of the wallpaper, apply glue and attach the protective tape to the second half of the wallpaper, and let the wallpaper soften for a period of time. During the gluing process, lay orange protective tape to ensure that there is no glue on the surface of the wallpaper half the time.

7. Wallpaper paving

When paving wallpaper, you can use instruments to judge the level and verticality of the wallpaper, and pay attention to leaving margins on the upper and lower edges. When laying wallpaper, pay attention to timeliness. If the glue begins to dry and become weak, do not lift the wallpaper for correction.

8. Wallpaper trimming and cleaning

Pay attention to the splicing of images in the overlapping parts, and cut the overlapping parts of the wallpaper. At the electrical switch panel, straighten it as straight as possible. The glue scraped from the wallpaper splicing and the glue on the panel can be scrubbed with a sponge.

9. Acknowledgment of completion of paving

The owner needs to inspect the wallpaper paving and properly keep the relevant documents that have been signed and approved, especially the warranty certificate. Since it involves future maintenance and warranty issues, it needs to be treated with caution.

What are the advantages of bringing your own adhesive wallpaper?

1. Affordable price: The price of general wall paint is about 11-20 yuan per square meter, while self-adhesive wallpaper is only 5.7 yuan per square meter, and no construction workers are required. No need to worry about the high cost of replacement.

2. Novel styles: rich varieties, colors, exquisite patterns, you can change it if you want. The manufacturer has fast shipping speed, frequent updates, different colors every time it is exported, so you have more choices.

3. Wide scope of application: It can be applied to any object with a flat surface and no dust, including walls, furniture, glass, ceramic tiles and other surfaces.

4. Easy to paste: The wallpaper is made of PVC material, has waterproof properties and comes with adhesive backing. It can be directly pasted without applying glue and tearing off the backing paper.

5. Flexible purchasing methods: Priced by volume, you can buy as much as you need and never waste it.

6. Non-toxic and environmentally friendly plastic: moisture-proof, mildew-proof, strong sound absorption, not easy to condensation, easy to stick, durable, and can be washed with water.

What is the best way to apply self-adhesive wallpaper? What are the advantages of self-adhesive wallpaper? After the introduction in the above article, everyone should now know how to apply wallpaper.

The editor would like to remind everyone that the wall that is to be covered with wallpaper must be treated in advance to remove dust and uneven areas before starting the laying work, otherwise it will affect the overall effect.