There is a problem with the system. Just change to a verified system disk and reinstall the system, so that the problem of system failure to start can be solved automatically and smoothly. You can use a USB flash drive or hard disk, and the installation speed is very fast. But the key is: there must be a system disk with good compatibility (compatible with ide, achi, and Raid mode installation) and can be automatically and permanently activated, and can automatically install the machine hardware driver, so that the system can be reinstalled automatically and smoothly. . The method is as follows:

1. U disk installation: Use ultraiso software to open the downloaded system installation disk file (ISO file), execute "Write Image File", insert the U disk into the computer, and click " OK", wait for the program to be executed, and then the USB disk for starting and installing the system is ready. After booting the machine with the prepared system USB disk, the system can be reinstalled smoothly;

2. Hard disk installation: The premise is that there needs to be a Windows system that can run normally. Extract "*.GHO" and "Install System.EXE" in the downloaded ISO file to the non-system partition of the computer, and then run "Install System" .EXE", press Enter directly to confirm the restore operation, and confirm again to perform the automatic installation operation. (Be sure to back up important data on drive C before executing!);

3. Graphic tutorial: How can I give you a detailed graphic version of the installation tutorial in this regard? Cannot be attached. It will be judged as a violation by the system.

The address is in the upper right corner of the “Know Page”…………si xin zhong…………Yes! Hope to adopt!