Second, be bold.
2. Subtitle:
Number two or three, bold.
3. Name:
Italic or Song Style, Primary Four.
4. Text:
Italic or Song Dynasty, size 4 or small size 4.
Extended data:
First, the official document format:
1, letter format:
The distance between the top edge of the name of the issuing authority and the top edge of the page is 30mm, so it is recommended to use a small standard song style, and the font size is determined by the issuing authority; 4mm below the full name of the issuing authority is a Wuwen line (thick at the top and thin at the bottom), and 20mm from the next page is a Wuwen line (thick at the top and thick at the bottom), both of which are 170mm long.
There are 28 words in the middle of each line. The name and double line of the issuing authority are printed in red. Explain the identification method of each element between two lines from the corresponding elements in this standard.
2. Command format:
The command sign consists of the name of the issuing authority plus "command" or "command", and the font size is determined by the issuing authority. The upper edge of the command logo is 20mm away from the upper edge of the center of the plate, and there are two lines of center logo numbers in the lower edge; The next two lines of the sequence number identify the text, the four words on the right of the next line of the text identify the signer's signature seal, and the two words on the left of the signature seal identify the issuer's position;
The position of the publisher of jointly issued instructions or orders shall be marked with the full name. On the next line signed and sealed by the signer, the words "right blank" indicate the writing time. The identification method of the distribution organ is the same as that of the cc organ. Other elements are explained from the relevant elements in this standard.
3, meeting minutes format:
The mark of meeting minutes consists of "* * * * meeting minutes". The location of the logo is the same as 8. 1.4, and the font size is determined by the issuing authority. Other elements are explained from the relevant elements in this standard.
Second, the document paper:
The international standard A4 paper is adopted, and the finished product format size is:
The width of the white edge (ceiling) on the official document paper is 20mm 0.5mm, the width of the lower white edge (foot) is 7mm±0.5mm, the width of the left white edge (binding) is 20mm 0.5mm, and the width of the right white edge (flanging) is15mm 0.5mm. The first page is not paginated.
In order to prevent the words "There is no text on this page", when adjusting the line spacing and word spacing, each page can be reduced by 1 line, each line can be reduced by 1-2 words, and each page can be increased by 1-2 words. Official documents should be printed on both sides.
The page number of the official document is marked with Arabic numerals with a half-angle of No.4 in white and placed on the bottom line of the edition. A word line of No.4 is placed on the left and right of No.4, and the word line is 7mm away from the lower edge of the center of the board. Single page number occupies 1 word in the right space, and double page number occupies 1 word in the left space. Document binding is consistent with document typesetting, and pages cannot be bound on the left side.
References:
Sogou Encyclopedia-Official Document