|

|----1. If you need to use the USB interface to print, please install the USB driver separately first, otherwise start from point 2 below;

2. Click "Start" - "Settings" - "Printers";

3. Double-click "Add Printer", click "Next", then, please read the selection instructions carefully, < /p>

For example: select a local printer, and then click "Next";

4. After carefully reading the selection instructions, click "Install from Floppy Disk", and then follow the table above. Instructions: Select your printer operating environment.

For example, if you use it under WINDOWS98, please select the following path: WIN98 (WINME). After clicking "OK", the file name that appears is: FP530KP.inf,

Then click OK.

5. The "Install from Disk" window appears. After confirming that the selected path is correct, click "OK" to enter the "Add Printer Wizard" window.

Please confirm whether the printer name is correct. ,If it is correct, please click "Next"; if it is incorrect, please start the reinstallation from the installation instructions 1.

6. Enter the "Add Printer Wizard" window, select an available port, for example, select: LPT1: printer port, click "Next",

The printer name will be displayed. Then follow the prompts, select "Yes" as the default printer, click "Next",

Select "Yes - Recommended printing", if the printing is correct, click "Finish". At this point, the printer driver installation has been successfully completed.

(During the installation process of the Windows 2000 version of this printer driver, the system may prompt that the digital signature of the driver cannot be found,

and ask whether to continue the installation. In this case, please select "OK", ignore the signature. This does not affect the correct installation of the driver)

|

|---- Tip: In WIN98/ME system, if you need. When using the USB interface to print, please install the USB driver separately first, and then install the universal graphics print driver!

After the installation is completed, select the FP-530K+ printer from "Start-"Settings-"Printer" Driver, select USB port.

****************************

Installation of USB driver.