On July 22nd, the Ministry of Housing and Urban-Rural Development reported the first batch of typical cases of violation of laws and regulations inspected by 14 provinces, which basically met the requirements of all provinces.
Check content
1, construction market
Check and investigate illegal contracting, subcontracting, illegal subcontracting and affiliated behavior;
Special rectification of "hanging certificates";
Real-name management of construction workers;
Project manager (registered construction engineer) and so on.
2, engineering quality and safety
Implement the project quality and safety manual system;
Supervision, law enforcement and inspection of project quality and safety;
Investigation and handling of accidents, quality problems and hidden dangers;
Establish quality and safety assurance system;
Implement relevant laws, regulations and mandatory standards.
3, building energy saving
20 18 inspection on the implementation of building energy efficiency;
20 18 check the progress of green building;
20 18 annual inspection on the progress of prefabricated buildings;
20 18 application inspection of green building materials.
A, the construction team admission management 1, enterprise qualification
A copy of the business license, qualification certificate and safety production license of the enterprise shall be stamped with a red seal; Copies of the certificate of the project manager, the certificate of full-time safety officer B and the certificate of C in charge of this project shall be stamped with the red seal.
2. Contract
The general subcontracting safety production agreement signed when signing the contract; After entering the site, sign the General Disclosure of Entering the Site.
3. Submit information for approval
If there are special operators, it is necessary to report to the project department the copies of the operation certificates of qualified and effective special engineering operators (such as electricians, welders, scaffolders, crane drivers, crane dismantlers, basket dismantlers, motor vehicle drivers in the field, piling workers, etc.). ).
4. Personnel training
Submit the roster of trainers, and take photos for the on-site pass (24-hour pass) after the training.
The cost of handling the work license is deducted from the project payment; If the badge deposit is not refunded, the subcontractor will deduct it from the project payment after leaving the site.
Second, safety management personnel configuration management Third, real-name management
Four, safety education management system
1. Carry out the guidelines, policies, decrees and systems of the Party and the State concerning safety in production.
2, production safety management system.
3, safety technology operating rules and construction site system, system.
4. Experiences, lessons and preventive measures in dangerous areas and safety work during construction and production.
5, the construction site fire knowledge and legal knowledge.
6, the implementation of entrance education, on-site education, job education and other three levels of education.
Educational content:
1. New workers must be educated and trained in safety knowledge before entering the construction site, otherwise they are not allowed to enter the construction site.
2. When entering the construction site, you must wear a safety helmet and fasten your hat belt.
3. When working on cliffs and steep slopes at a height of two meters without protective facilities, you must fasten your seat belt.
4, aerial work, are not allowed to throw down or up objects such as materials and tools.
5, people who don't understand electrical appliances and machinery, it is forbidden to use and play with mechanical and electrical equipment.
6, building materials and components should be neatly stacked, not too high.
7. Dangerous areas should be clearly marked and protective measures should be taken. A red light should be set for warning at night.
8, in the operation, should stick to their posts, it is forbidden to drink and operate. Do not urinate anywhere, do a good job in the environment and dormitory hygiene.
9. Special jobs (electrician, welder, fireman, blaster, driver and conductor of lifting pile driving, scaffolder, drivers of various motor vehicles, etc.). ) You must pass the professional training examination of relevant departments and issue an operation certificate before you can operate independently.
10, slippers, high heels, barefoot, slipper with nails and bare-chested operation are prohibited on the construction site.
1 1. Scaffolds, protective facilities, safety signs, warning signs, lead wires or accessories connected with scaffolding on the construction site shall not be dismantled without authorization. If it needs to be removed, it must be reinforced and approved by the construction director.
12, holes, pits, derricks, hanging mouths, funnels and other dangerous places on the construction site should be well protected and clearly marked.
13, no one is allowed to throw materials, objects, garbage, tools, etc. Down or up. Don't start all the machinery at will. Concentrate on the operation and don't joke.
14, are not allowed to sit on the scaffolding protective railing to rest and sleep on the scaffolding.
15, trolley loading materials, should pay attention to smooth, grasp the center of gravity, not to pour or spill.
16, removed scaffolding, steel formwork, roller head or wooden mold, support should be arranged in time, and nails should be pulled out in time.
17, the hanging basket is not allowed to stay in the air for a long time; After work, the hanging basket must be placed on the ground and the power supply must be cut off.
18, the middle of the ladder should be fastened, and the lower part should be provided with anti-skid measures. No one is allowed to ride on it.
19. aerial work: personnel engaged in aerial work must be healthy. It is strictly forbidden to engage in aerial work by people suffering from hypertension, anemia, serious heart disease, psychosis, epilepsy, high myopia above 500 degrees and those who are considered unsuitable by doctors. ?
1) When working on the platform and the edge of the house, face outwards and fasten your seat belt.
2) Don't push too hard when working high above the ground to avoid losing balance. ?
3) Dismantle the wooden crowbar on the platform. Inward, not outward, to prevent people from falling outward.
4) In case of heavy rain, dense fog and gale of magnitude 6 or above, outdoor operation should be stopped.
5) There must be sufficient lighting for construction at night.
20. Electric stoves, gas stoves, briquette stoves and various electric heaters are not allowed in the dormitory, and smoking is not allowed in the bed.
Verb (abbreviation of verb) labor protection articles management system 1. Labor protection articles purchased by the general contractor: safety helmet, safety shoes, work clothes and reflective vest. The above shall be applied by the subcontractor, purchased and distributed by the general contractor in a unified way, and the expenses shall be deducted from the project payment.
2. Subcontractors must unify work clothes, safety shoes, reflective vests and safety helmets marked with the word "Zhong Jian" (white for general manager, red for safety manager, blue for special jobs and yellow for workers), and must distribute them to everyone, and replace them in time after being damaged.
Vi. Construction site safety management system 1. Construction personnel at all levels on the construction site must abide by the "six major disciplines" of safety production and various safety production norms, procedures and systems, and memorize their respective safety production responsibility systems and safety technology operating procedures.
2, the project department must be in accordance with the relevant standards, according to the actual situation to develop safety production guarantee plan, and must be effectively implemented.
3, the project department to do a good job of publicity and education of production safety, pays special attention to the implementation of various safety measures, and combined with the actual situation of the construction site to do a good job of safety technical disclosure.
4. Various equipment, facilities, materials and components on the construction site. Stacking should be carried out according to the layout of the site construction stage to ensure smooth and clean roads.
5. During the construction of adjacent high-voltage lines and foundation pits, materials shall not be piled up at will, temporary facilities shall not be built at will, and mechanical equipment shall not be parked at will, and relevant regulations shall be observed.
6, the construction site to set up temporary fence and the guard, completes the anti-theft, fire prevention, prevent sabotage.
7, according to the construction organization design or scheme, do a good job in the hole, limb, floor access and temporary office building protection measures, to ensure the safety of construction personnel, pedestrians and residents.
8. Anyone who enters the construction site must obey the command of the project department and abide by the various systems of the project department. Smoking and drunken work are prohibited in the meeting place.
9. All personnel participating in the construction must receive admission education and post safety operation technology education. Operators, electricians, scaffolders, welders and other special operators of all kinds of mechanical equipment must receive special safety operation technical training, and can operate independently only after passing the examination and holding relevant certificates.
10, various safety facilities, equipment, signs, etc. At the construction site, no one is allowed to move or dismantle it without authorization. If it is really necessary to move or dismantle it due to construction needs, it can only be implemented after going through the relevant formalities with the relevant departments of the project.
Seven, safety technical disclosure management system 1, safety technical disclosure content must be recorded in a unified printed form, write down the disclosure of engineering parts, jobs and disclosure time, disclosure and disclosure must be signed.
2. Each disclosure form shall be made in triplicate, one for the disclosing party, one for the disclosed party and one for the security department.
Eight, work permit management system Before applying for a work permit, consider the surrounding environment, construction equipment, qualifications of construction personnel, and whether safety protection measures are in place. The authorized person of the project department can issue the work permit only if the subcontractor supervisor applies.
Nine, major hazard management system
1. The classification of major hazard sources shall be carried out according to the safety management measures of partial projects with greater risks. Major hazard sources must be publicly announced, declared online and reported to the company.
2. Before the implementation of the project, complete the project hazard identification, major hazard control measures, major hazard control objectives and management plans, and establish the hazard approval process.
Ten, temporary electricity acceptance management system 1, temporary electricity on the construction site, must be in accordance with the technical specification for safety of temporary electricity on the construction site:
Temporary electricity construction organization design (there are five or more temporary electricity equipment or equipment with a total capacity of 50KW and above).
Or formulate technical measures for safe use of electricity and electrical fire prevention measures (the number of temporary electrical equipment is less than 5, and the total capacity of equipment is less than 50KW).
2, the construction site installation, maintenance or removal of temporary electricity engineering, must be completed by an electrician (electrician must hold a valid certificate).
XI。 Small and medium-sized mechanical equipment acceptance management system 1. Mechanical equipment (including cables and electrical boxes) must undergo process acceptance, and an acceptance record and the signature of the acceptance personnel are required. Unqualified equipment is strictly prohibited from entering the site.
2. Submit the factory certificate, annual inspection report and on-site acceptance certificate for approval before use; The factory certificate of large equipment shall be submitted for approval before use.
Twelve, large equipment acceptance management system 1, the project should have full-time machine controller.
2. Large and medium-sized equipment entering the site should have good performance and qualified quality. The purchased equipment shall have the manufacturer's business license, product production license, quality certificate, factory certificate and warranty certificate of key components.
3. When it is necessary to rent equipment, enterprises with mechanical equipment rental qualifications and certain equipment management capabilities should be selected.
The leasing unit shall provide the business license, equipment factory certificate, quality certificate and warranty certificate of the corresponding parts. A copy of all the above documents shall be submitted to the general contractor, and a detailed equipment lease contract shall be signed with the leasing unit.
4, mechanical equipment installation, demolition, must prepare targeted installation, demolition plan.
Before installation and disassembly, the safety technical disclosure of installation and disassembly must be targeted, and the signature records of the disclosure person and the disclosed person should be recorded. Installation and disassembly professionals must hold valid special operation certificates, and there should be full-time security officers/machine controllers on site to supervise the operation. ?
5, equipment installation, demolition, must be carried out by a professional team with installation qualification.
After the equipment installation is completed, the installation unit must carry out self-inspection, and report it to the testing unit after passing the self-inspection, and the general contractor and supervisor will issue a test certificate before acceptance. The acceptance shall be recorded in writing and signed by the supervisor for the record.
The contents of acceptance include software and hardware:
Software: production license, product quality certificate, factory certificate. The leased equipment must have the qualification certificate, business license, equipment operating instructions, etc.
Hardware: equipment condition, appearance, technical performance, metal structure, power device, electrical device, safety device, etc.
6. When the equipment is officially put into operation, it must be hung with an acceptance card, a permit card (inspection certificate), an operation regulation card, a post responsibility card, a person-fixed machine card and a load limiting card (the tower crane should be hung with a "Ten Don't Hang" card).
7, equipment operators must be trained professional operators, elevator drivers, tower crane drivers and commanders must be the personnel who have obtained the special operation certificate to operate, and it is forbidden to work without a license; Meanwhile, effective communication tools (walkie-talkies, etc. ) must be equipped with.
8, summer equipment should have safety protection devices and lightning protection measures, all kinds of limit, anti-falling devices should be safe and reliable, it is forbidden to safety device failure, failure put into operation, lightning protection grounding to good contact.
9. The equipment shall be supplied with specially designed electric box, which shall not be used for other purposes. The equipment and electric box shall have reliable zero connection or grounding protection, especially the grounding resistance of equipment grounding protection must comply with the system regulations.
10. The project department shall regularly inspect the dangerous parts such as safety devices, structural parts, mechanism parts and electrical parts of large-scale equipment, and rectify them immediately if problems are found. It is forbidden to run the equipment "with diseases"; And make all kinds of inspection records.
1 1. In strict accordance with the equipment specifications and maintenance requirements, conduct regular and irregular daily maintenance of field equipment and keep relevant equipment maintenance records.
12. In case of equipment failure in daily operation, notify relevant professional units and personnel to be present for maintenance as soon as possible. Under the condition of ensuring safety, troubleshoot at the first time, ensure the safe and normal operation of field equipment, and make relevant maintenance records.
Thirteen, fire management system 1, fire management must establish a responsibility system, and implement it to the person in charge, and establish a voluntary fire brigade.
2, temporary housing construction layout, temporary facilities layout should meet the requirements of site fire prevention, fire extinguishers and personnel safety evacuation.
3, the entrance to the construction site should meet the requirements of fire engines, and should be arranged in different directions, the number should not be less than 2. If it is really difficult to set only the 1 entrance, a circular road meeting the requirements of fire engines should be set at the construction site.
4. The fire prevention distance between the inflammable and explosive dangerous warehouse and the project under construction should not be less than 15m, the fire prevention distance between the combustible material storage yard and its processing plant, the fixed hot work site and the project under construction should not be less than 10m, and the fire prevention distance between the warehouse and other temporary buildings, temporary facilities and the project under construction should not be less than 6m.
6, temporary fire control facilities should be synchronized with the construction in progress. During the construction process, the gap between the temporary fire-fighting facilities and the construction progress of the main structure of the project under construction shall not exceed 3 floors.
7, the fire hydrant pump on the construction site should use special fire distribution lines. The special distribution line for fire fighting shall be connected from the upper end of the main circuit breaker of the main distribution box on the construction site, and the power supply shall be kept uninterrupted.
8, the minimum configuration standard of fire extinguishers:
9. The maximum protection distance of fire extinguisher (m): 10, the sum of the construction areas of temporary buildings is greater than 1000㎡ or the single volume of the project under construction is greater than 10000m? Temporary outdoor fire water supply system should be set up. The distance between fire hydrants should not be greater than 120m.
1 1, building height greater than 24m or monomer volume greater than 30000m? Temporary indoor fire water supply system should be set up in the project under construction.
12, the construction site should have lighting equipment at night, keep the passage of fire engines unblocked, and arrange forces to strengthen patrol on duty.
13, welding and cutting operation point, the distance between oxygen cylinder and acetylene cylinder and inflammable and explosive articles shall comply with relevant regulations; If the above requirements cannot be met, the hot work approval system should be implemented and effective safety isolation measures should be taken. Strictly implement the "ten don't burn" rule.
When using electricity on the construction site, we should strictly implement the provisions of the relevant documents of the higher authorities, strengthen the management of electricity consumption, and prevent electrical fires.
Fourteen, foundation pit control and support management system 1, deep foundation pit excavation and construction must be carried out in accordance with the construction technical scheme.
2. Before excavation, the specific location of underground facilities shall be determined according to the safety technical disclosure, and the excavation permit shall be obtained from the relevant departments in advance?
The excavation permit shall be placed at a specific construction site for inspection by relevant personnel.
3, excavator operation, the scene must be equipped with full-time commanders, commanders need to wear reflective vest.
4. During excavation, a protective railing of 1.2m must be placed at the edge of the foundation pit, and the protective railing must be painted with black and yellow; It is forbidden to pile materials or objects within 2 meters of the foundation pit.
5. It is forbidden to climb up and down the solid wall bracket or climb directly from the ditch? Slot? Climb up and down the pit wall or jump directly; Intermittent is not in the foundation pit? Rest at the foot of the pit slope?
6, artificial digging two horizontal spacing shall not be less than 2m, longitudinal spacing shall not be less than 3 m .. No digging?
7, artificial cooperate with mechanical digging, personnel are strictly prohibited to enter the bucket radius of gyration, must stay behind the mechanical stop operation must enter the bucket radius of gyration to remove soil?
8. The bracket has sufficient strength, rigidity and stability. Model and size of sheet pile, arrangement of supporting points, buried depth, length and diameter of anchor rod, etc. Support components shall be constructed according to the design.
9. Measures must be taken to prevent rainwater from flowing into the foundation pit during foundation pit excavation in the rain period, and the rainwater in the pit should be discharged in time.
Fifteen. Scaffolding acceptance management system 1. Scaffolding shall be erected by scaffolder (special type of work) in strict accordance with the requirements of Technical Specification for Scaffolding Safety GJG 130.
2, scaffolding, must prepare the construction organization design or construction scheme, the scheme should strictly meet the requirements of construction methods and procedures.
3, the overall floor scaffolding, every erection of 2 ~ 3 steps, organized by the relevant personnel of the project department, after the acceptance, can be put into use.
4, for special scaffolding (pick, climb), etc. Every time a shelf is picked or climbed, the project department will organize relevant personnel to check it carefully, and it can only be put into use after it is qualified.
5. Scaffolding in elevator shaft and lighting shaft must be set according to the requirements of regulations or schemes; After the erection is completed, the project department must organize personnel to pass the acceptance before putting into use.
6. When the same scaffold is used by multiple construction units, the general contractor must specify the management unit of the scaffold;
7. When the structure is handed over to the decoration unit, the general contractor shall organize relevant personnel to perform the handover and acceptance procedures, and at the same time clarify the guardianship unit and guardian again;
8. It is forbidden to dismantle any part of the scaffold; If it is really necessary to dismantle it due to construction, the subcontractor's safety director must submit a written application to the relevant project management department, and it can be implemented only after it is confirmed and approved by the general contractor's project department and reinforcement remedial measures are taken.
Sixteen. Hot work management system 17. Lifting operation management system
1. When the crane needs to enter the site, it shall notify the security department of Zhong Jian in advance to organize the acceptance. Before acceptance, the original supporting materials related to the crane shall be submitted to check whether the crane is in good condition and whether the limit is effective.
2. After the crane reaches the designated operation position, it should put warning flags on the inner ring of the operation range, then extend all the legs and pad them with sleepers or steel plates to adjust the levelness.
3, must by professional lifting command hook workers to command lifting operations, commanders must wear reflective vest.
The commander must concentrate on the special command work and must not do any other part-time job.
4, homework, construction personnel shall not be directly controlled by hand, must use a rope to control.
5. It is forbidden to stand in the area within the radius of gyration of the crane, and it is forbidden to lift objects in front of the locomotive.
6. During the hoisting operation, the specific content of "Ten Don't Hoist" shall be strictly observed.
7. It is forbidden to engage in lifting operations in bad weather, such as gale and fog with magnitude 6 or above.
Eighteen, aerial work management system 1, where the falling height datum is more than 2m (including 2m), it is possible to fall, which is called aerial work.
2. Safety technical measures for working at heights must be incorporated into the construction organization design of this project. The construction organization design shall be compiled by the engineering and technical personnel, reviewed by the technical director, and implemented after approved by the competent department of the company.
3, climbing, hanging high homework personnel and the erection of high safety facilities, must go through professional technical training and professional examination, show certificates, and should be regular physical examination.
4. In case of bad weather, open-air climbing and hanging aerial work are not allowed.
5. Before working at heights in building construction, check and accept the safety protection facilities item by item. Aerial work can only be carried out after acceptance.
6. Protective facilities used for aerial work shall not be removed without authorization. When the safety protection facilities need to be temporarily removed or changed due to work, it must be approved by the construction director of the project management department, and corresponding reliable measures should be taken. After the operation, it should be resumed immediately.
7. In addition to this system, the work at heights on the construction site shall conform to the current national and industrial work at heights system and safety technical standards.
Nineteen, civilized construction management requirements 1, civilized construction management system
Before construction, it must be approved by the relevant departments, and accept the civilized supervision and inspection of the district and county safety production supervision bureaus and the competent construction departments.
Construction at night should be approved by relevant departments, and noise should be kept to a minimum.
Without the approval of the relevant departments, materials and machinery are not allowed to be piled up outside the construction scope, so as not to affect the order, pollute the city, and damage the street trees and greening facilities.
The height of the fence set for the construction of main roads in urban areas shall not be less than 2.5 meters, and the materials used shall ensure that the fence is stable, clean and beautiful; The height of the fence set in other sections shall not be less than 2m, and the materials used shall ensure that the fence is stable and tidy.
Do not illegally occupy land and clean up silt in time; Transport bulk materials, fluid building materials, silt and garbage, and do not leave them scattered along the way; Vehicles stained with sand and mud are not allowed to leave the construction site.
Do not dump garbage and silt around the construction site; No littering, smooth drainage facilities and no accumulated water on the construction site.
The roads on the construction site are unimpeded; Materials, machines and tools shall be classified and neatly stacked according to the layout, and clearly marked.
When the construction workers finish the last working procedure or get off work every day, they should "clear the materials after work".
The problems found in the inspection and self-examination of the higher authorities should be seriously and timely rectified.
2, the construction site field capacity health system
The archway should be erected at the obvious gate of the construction site, with the sign of "Ten Signs and Two Drawings" hanging, and the fence should be firm (in line with Article 4 of the civilized system).
The transportation road on the construction site should be smooth, solid and smooth, and drainage measures should be taken.
Finished products, semi-finished products and other building materials of projects under construction should be neatly stacked according to the site layout in the construction organization design or scheme, and signs should be set up. Protective measures should be taken for easily damaged facilities.
Construction waste should be removed in time. The removal point should be "Clean after the material is finished".
The construction area and living area should be separated. On-site offices, dormitories and dressing rooms should be kept clean and free of sewage and dirt. Domestic garbage should be piled up in a centralized way and cleaned up in time.
The setting of the canteen on the construction site should comply with the health system to prevent food poisoning.
Toilets on the construction site should be kept clean and conform to the system, and it is forbidden to urinate anywhere on the construction site.
Twenty, public security management requirements 1, public security management system
Good image, full of energy, stand guard in a straddle posture and salute the company leaders, project leaders and owners.
Dress neatly and wear uniforms. Keep the hair under the brim no more than 2 mm and no beard.
The duty room should be kept clean, and other personnel are not allowed to stay in the duty room. Take good care of public property and ensure that the project property is not lost or damaged. Once intentional damage to citizens' property is found, it will be punished according to the original price compensation.
Use correct gestures and civilized language, and ask questions before going forward. To do this, first salute, sir (miss), contact, register and release.
When on duty, stick to your post, be loyal to your duties, be diligent and punctual, and don't leave your post. (a diligent: diligent inspection, diligent inspection; Timely: stop violations in time and report hidden dangers in time; No: No AWOL, no sleep at work, no cell phone, no stealing from it. )
The night shift takes turns to patrol and sign in every half hour, and report to the post on time every half hour, without omission.
When on duty, you must patrol the office area, living area, construction area floor, warehouse and other places from time to time. When problems are found, report them in time on the premise of ensuring the safety of personnel and property. No night patrol personnel are allowed to enter the office without special circumstances.
Familiar with the site environment, can use fire-fighting equipment and do a good job of fire prevention and theft prevention. Fire and theft accidents should be put out and reported in time, and the scene should be protected. In case of fire or theft, those who have made meritorious deeds will be rewarded as appropriate.
Attend the training meeting every Monday, Wednesday and Friday, and you can't be absent without reason. In case of special circumstances, the captain or monitor should be informed one day in advance. Don't drink too much on duty, don't do irrelevant things, and obey the management arrangements of superior leaders.
Don't be late for work and leave early. Those who disobey the management will be admonished once, warned twice, punished more than three times and punished more than 200 times. In serious cases, they will be dismissed as exceeding the company's rules and regulations.
If it is found that the inside job is stealing from the inside job and the accomplices are speculating outside, the salary of the month will be deducted and dismissed, and the public security organ will handle it.
Do a good job in visitor registration and fill in the visitor reception form correctly. When all visitors come in and out, the security personnel should have detailed entry and exit records and keep an entry and exit account of personnel and articles.
Strictly implement the handover system and make handover records during handover. Items must be counted in person and signed by both parties to confirm the handover. The shift is not clear. If anything is lost, the responsibility lies with the person on duty. Clean the workshop after the shift.
Do a good job in the registration of transport vehicles, indicating the goods and quantity loaded by the vehicles. When the vehicle enters and exits, it is necessary to check the vehicle and its personnel, including the cab. It is necessary to inform the personnel on board of the basic requirements for entering the site.
The resignation of security personnel (resignation of security personnel) must be submitted for approval in written form 15 days in advance.
2, project access control (gate, gate) management
3, in and out of the personnel management
After safety training, the construction personnel will be issued with badges, and the construction personnel wearing badges can enter the site. If there is any fraudulent use of the badge, it will be confiscated on the spot.
Strictly check the identity of personnel entering the construction site. Those with incomplete safety helmet and badge are forbidden to enter the construction site.
Visitors or conference personnel must show their valid personal certificates (ID card, residence permit, driver's license), register at the doorman first, contact the interviewee by telephone, and enter the site only after the security personnel agree to issue a visitor card. At the same time, tourists should wear basic labor protection articles when entering the construction site.
When all visitors come in and out, the security personnel should have detailed entry and exit records and keep an entry and exit account of personnel and articles.
Foreigners are not allowed to stay at the construction site without the permission of the project leader.
4. Management of incoming and outgoing materials and vehicles
The import and export of subcontracted materials must be carried out in strict accordance with the material import and export system. The exit list must be approved by the relevant personnel of the general contractor (project manager and production manager), and the security guard can check the model and quantity of the items with other relevant personnel (ministry of materials and equipment and responsible engineer) before releasing them. Those who are altered or have incomplete procedures shall not be released, and the guards have the right to detain them.
When vehicles enter the construction area, the speed limit must be 5KM/ h, and when entering the construction area, there must be a special person to command.
Large and small vehicles must be parked at designated places, and unified management shall be implemented, and the passage shall not be blocked, which will affect the normal traffic on site.
Flammable, explosive and toxic substances are strictly prohibited from entering the construction site; (If necessary for construction, the safety department of the general contractor must be informed, and it can only be entered after inspection and acceptance and complete protective measures).
All vehicles with muddy tires are not allowed to leave the field without cleaning to ensure clean roads; When vehicles enter and leave the construction site, dust prevention and omission prevention measures should be taken.