1 1, flammable items and instruments and equipment are prohibited from being placed under the power supply and switch.
2. When starting or closing electrical equipment, the switch must be in place. Before using the equipment, you should first understand its performance and follow the procedures. If the electrical equipment is overheated or burned, cut off the power supply immediately.
3. When electrical equipment and power distribution equipment fail, they should be repaired in time, and no wiring or connection is allowed without authorization.
4. When people leave the room for a long time or the power supply is interrupted, cut off the power switch, especially the power switch for heating electrical equipment.
5. Be wary of electric sparks or static electricity in the laboratory. When the wire is on fire, do not use water or conductive acid-base foam extinguisher to extinguish the fire. Cut off the power supply and put out the fire with sand or carbon dioxide fire extinguisher.
6, someone get an electric shock, should immediately cut off the power supply, or use insulated objects to separate wires from the human body, the implementation of rescue.
Third, pay attention to safety and fire prevention
1. Smoking or burning other articles is strictly prohibited in the laboratory. Report and deal with fire hazards in time, actively put out the fire and call the police in time (1 19).
2, the use of alcohol lamp should be carried out in strict accordance with the operating specifications.
3, according to the operating procedures, the use of high-pressure sterilization device, to prevent explosion accidents.
Company Name: Commitment Letter Signature: Representative Signature: Date:
Date:
Stamps:
According to the national laws and regulations and the relevant provisions of the company's management system, in order to conscientiously implement the policy of "safety first, prevention first, comprehensive management", various safety measures are implemented. This responsibility letter is signed by both parties through consultation:
First, pay attention to the safe use of dangerous goods and drugs.
1. All toxic substances and chemicals shall be kept, distributed and used in strict accordance with the categories, and the remaining articles and residues shall be properly disposed of. The warehousing registration of chemicals shall strictly indicate the warehousing time and quantity, and the account books shall be clear and tidy.
2. Make the outbound registration for the outbound chemicals, and indicate the picking person, time and quantity. Waste gas, waste and waste liquid shall be properly treated according to relevant regulations, and shall not be discharged at will or pollute the environment.
3. Pay attention to safety when using corrosive drugs such as strong acid and alkali, and pay attention to the fact that acid-base waste liquid cannot be discharged at will. Drugs should be classified and stored. Drugs that need to be stored away from light should be treated away from light, and corrosive chemicals should be isolated.
4. All drugs, standard samples and solutions should be labeled. Never put anything that does not conform to the label into the container. Toxic drugs should be classified and stored separately, and marked in a conspicuous place.
5. It is forbidden to use laboratory utensils to hold food, to use teacups and tableware to hold medicines, and to use beakers as tea sets.
6. When diluting sulfuric acid, it must be carried out in a hard and heat-resistant beaker or conical flask. As long as the concentrated sulfuric acid is slowly injected into the water while stirring, when the temperature is too high, it should wait for cooling or cooling before continuing. Do not pour water into sulfuric acid!
7. When opening the volatile liquid reagent, first put reagent bottle in the tap water to cool for a few minutes. Don't open a bottle for people. The flammable solvent must be heated in a water bath to avoid open flames.
8. When taking off the boiled solution, gently shake it with a bottle clamp and take it off, so as not to spill it and hurt people.
9. Glass rods, glass tubes, thermometers, etc. When inserting or pulling out rubber plugs and hoses, cotton cloth should be padded, and it is not allowed to insert or pull out forcibly, so as to avoid breaking and stabbing people.
10, when opening the high-pressure gas cylinder, it should be done slowly and not exported to people.
1 1. It is forbidden to use flame to find the leak on the gas pipeline. You should check the leaking place with soapy water.
12, the laboratory should be equipped with first-aid drugs, fire equipment and labor insurance supplies.
13, establish and improve the post responsibility system, and check the water and electricity before going to work every day to ensure safety.
Commitment letter of laboratory personnel for safe production 3 I. Introduction to this position
Do a good job in the analysis and testing of this position in a timely and accurate manner, take samples at fixed points and at fixed times, and keep samples to ensure the analysis quality. Do the original records carefully, keep the records neat, complete and imitation of Song Dynasty, insist on recalculation, and upload LIMS in time.
Second, the security commitment
1, sampling shall be carried out in strict accordance with the operating procedures to ensure the safe sampling of the tank.
2, be loyal to their duties, strictly fulfill the lab technician's safety production responsibilities.
3, do not violate the rules, do not violate labor discipline, resist illegal command.
4. Dress for posts according to regulations, and use and properly keep labor protection articles.
5, familiar with benzene, xylene and other petrochemical products and the physical and chemical properties of reagents and additives used in this team, in strict accordance with the operating procedures for laboratory analysis.
6. Actively participate in various safety training, safety learning and accident emergency drills. Can call the police, can save themselves and each other, and can skillfully use gas masks and fire fighting equipment.
Commitment: All chemists of finished products.
As an employee of Quwo County Civil Welfare Enterprise Co., Ltd., I have the responsibility to learn and implement various rules and regulations and operating procedures stipulated by the company, workshop and team, so I promise and guarantee that:
Accept the pre-job physical examination, get the approval of relevant leaders, and pass the three-level education and training before taking up the post.
Second, we must obey the leadership, obey the command, and strictly abide by the post discipline of the staff and workers: ① It is not allowed to be late and leave early; (2) No off-duty, sleeping and visiting posts; No reading novels, playing mobile phones, listening to music or taking a bath in class; (4) Do not do private work or fight during working hours; (5) Don't wear high heels and slippers at work; ⑥ Those who wear labor supplies incompletely and use them irrationally at work are not allowed to take up their posts; ⑦ Foreigners are not allowed to stay, gamble or stay in the factory.
Third, we must strictly implement the handover system. The shift change should be "five clear": the shift change tasks and equipment operation should be clearly recorded; The main situation of this lesson is clearly recorded; Make a clear record of the work or the things explained by the superior; Records and signatures should be clear; The problems that need to be improved in this class should be clearly explained to the successors.
Four, in the production, be sure to wear labor insurance supplies, make good use of all safety facilities, do a good job of working ticket, it is forbidden to operate illegally. If an accident occurs due to his illegal operation, violation of labor discipline and violation of the above commitments, he is willing to accept the following penalties from the company or workshop:
1. In case of common accidents such as burns, scalds, burns, lacerations, abrasions, falls, squeezing injuries, gas poisoning, etc. caused by illegal operation, we are willing to accept a fine of 20% of this month's salary.
2. If there is a general accident due to personal behavior, he will be fined for refusing to accept the salary of the current month and leave the company automatically.
Employee _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _