Method 2: Then, press any key to enter the CD-ROM startup mode and load the mini version of the operating system. Then, press Enter to confirm the installation. Then, press F8 to accept the license agreement. Then, choose the location to install, choose a large enough space, and press enter. Then, select the file system, recommend NTFS, and press Enter. Then, you will enter ScanDisk and copy the installer to your hard disk. Then, the computer will restart after 15 seconds, and press Enter to restart immediately. Then, continue the installation process from the hard disk. At this point, the graphical interface mode starts. After a series of hardware tests, you will enter the region selection prompt, where you can configure the language, keyboard and region. Then, you will be prompted to enter the user name and organization name and generate a computer name that you can change. Then, you will be prompted to enter the product registration code. Then, you will be prompted to enter the administrator password. Then, the component selection box will be displayed to select the Windows component to install. Then, you will enter the setting of time zone and time. Then, enter the network component installation (if your computer has a network card and is correctly identified in the hardware test). After configuring the network, the computer will detect and install a series of Windows components and services. Then, restart and run the newly installed Windows. Then, enter the final stage of installation and monitor the plug-and-play hardware that was not detected before. It finally works!
Method 3: Install the system (take WINDOWS XP as an example below). I chose a complete Windows XP installation CD without any cracking. Start the computer, press enter when the words "press any key to start the CD" appear, start copying the installation program, and check the capacity and format of the system disk location, which can be ignored; When choosing the file format of the system hard disk, it is best to choose AT32 instead of NTFS. Although ntFS file system greatly improves the stability and speed of xx operating system and the hard disk management function, NTFS only supports Windows NT, Windows2000 and WindowsXP with NT as the kernel, but does not support DOS, WindowsME and Windows98. So it is not suitable for those of us who often play software. Once the system crashes, you can reinstall the system by repartitioning and formatting under NTFS. As long as the system is repartitioned, the data and information on the hard disk will be completely finished. This is the lesson I learned from countless losses. When I used Windows2000, I used NTFS system, which was mainly used to prevent CIH virus from damaging the system and hardware, but now it is too easy to prevent and kill CIH. On the contrary, under the FAT32 file system, as long as there is a 98 or Me boot disk formatted with disk C, I can reinstall the system, and I am not afraid that all the data on the hard disk will be lost. (I don't talk about zoning here, but I will talk about zoning later, including the actual practice of FDISK and DM. This is a dangerous and troublesome thing. ) Then, copy the system files and prepare for installation. The dialog box for selecting time zone and language appears, and I don't need to say it. Wait patiently. If XP was originally installed under DOS, you must first copy the smartdrv.exe file (named smartdrv.exe in the installation directory of Win98) to the 98 startup floppy disk and run it before installation, which greatly improves the installation speed. I sometimes run it before installation and sometimes forget it, but I don't feel much difference. Maybe my computer has a large memory? If XP is reinstalled under the condition that the original system is unchanged and the system hard disk has xx as the system, the "Upgrade/New Installation" dialog box will appear during the installation process, and you must choose to upgrade at this time, unless you want to install dual xx as the system on your computer. When serial number is required, enter the following number: bx6t-mdjkw-h2j4x-bx67w-tvvfg. This registration code can basically be installed (I have tried at least 5 or 6 XP installation disks). Generally, the installation time does not exceed 60 minutes. After installation, choose not to activate it now and then activate it later. Press Next, fill in at least one name, such as JixXP, and press Enter all the time, that's all. Now start to activate the system: I used the activation method of Russian hackers. Please refer to the following instructions:
Method: copy SETUPREG. HIV to the %systemroot%system32 directory to overwrite the original file (I can't find this SETUPREG. HIV, but I pasted it directly), restart, press F8 to enter safe mode, log in as an administrator, and run WINXP_CRK. EXE, restart it, enter WinXP, select "mobile phone activation" when asking for activation, and fill in "4000" in each square box. Western Electronics/resources/how to tell/ww/Windows/default.mspx click the verify now button, and then download the ActiveX control according to the prompts. Thanks for showing up! The screen passed, so congratulations, the WindowsXp SP2 you are using is genuine! ) No.2, XP directory finder Keyfinder 1.4 1
This software is used to view and modify CDKEY, mainly to modify some installation serial numbers that have been marked as "illegal" by Microsoft's activation server:) No.3 online activation program 1.0 At present, the activation mode of SP2 must be online activation. This program is an effective online activation method developed in the era of SP 1. Although there will be an error prompt when activating in SP2 era, it is still the only effective method. Preparing these three tools is the only necessary way to activate Xp SP2 at present.
Step 2, install WindowsXP Professional and SP2:
65438 +0. When installing WindowsXP Professional, pay attention to the installation serial number must be calculated by 4-in-1 1 counter. In case of any accident, it can be calculated and recorded before installation, and it is best to fill in the random seed at will and click Generate to generate it. (The reason why it is not recommended to download the serial number provided in the installation package from pirated CDs is because many people are using it. Because the user market of the same serial number is too big, it is easy to be blocked by Microsoft! :) (The reason why you randomly fill in the random seed and click Generate is to prevent lazy users of version D from using 0 as the seed to generate the same serial number, so there is a conflict:) NO.2 Install the official simplified Chinese version of SP2, and be careful not to activate WindowsXP before installing SP2.
Step 3, activate SP2 version of WindowsXP Professional:** Suggestion: It is best to make a Ghost clone backup when it is not activated. * * Run the online activation program 1.0 (key step! ! ! ) (1) Click on the slightly stingy window with the mouse:) (2) Wait:) (3) After the activation window appears, please select "Activate via the Internet" (4) You can choose not to register (you can register, name, password and email verification code ..., which is very troublesome:) (5) Fill in the serial number used in the last installation (6) Try again. Is normal) (8) Restart the computer (9) Do not directly run Activate windows (10) in the start menu, and run online activation 1.0 again. (1 1) There are two situations at this time: a. Prompt that windows has been activated! (You can skip to step 21:) B. If you don't get the success prompt, you will still repeat the previous interface, so please don't worry, you only need one turn:) (1 1) You still choose "Activate via the Internet" (12) and don't register (/) ! ! Instead of "Fill in the serial number when installing" or click "Retry", click "Phone" (14) and select "Change ID" (15). Use 4in 1 calculator to calculate a new serial number (16) and fill in the newly calculated serial number (65438) (2 1). The second step should prompt that the activation is successful! At this point, WindowsXP Professional SP2 has been successfully activated. (If you still don't succeed, please keep repeating the above 8~20 steps until you lose patience:)
* * * Tip: Finally, at this time after activation, on the premise of backing up important personal data and files in the partition where XP is located, change the system date (at least 3 1 day, the next month, what is the activation without a month? ; ) and then restart to see if you can log in smoothly without the activation prompt. If you log in normally, your XP SP2 is really fully activated!
How do novices install a perfect system? Today, we will take Windows2000/XP as an example to tell you some experience in installing the system, hoping to help you. Before installing the system: first think about which disk you want to install the system on, and then organize the disks. The sorting mentioned here is to save useful files on another disk to prevent them from being deleted by mistake when formatting. Also, if you can't find the hardware driver disk of your machine, it is recommended to use tools and software to save the driver. Windows optimizer can do this. It should be noted that everything in My Documents is included in the C drive, so don't forget to save the file in it. As for the path of favorites, each system is different. Generally, there is a folder named after the login name of your machine under C:\Documents and Settings. When you open it, you will see the favorites and copy them to another disk. After the above, you can basically start installing the system. Restart the computer, and then press the DEL key to enter the BIOS setup. Some people here don't know when to press the DEL key, so I'll tell you a stupid way. Just restart and keep pressing. There is also because the motherboard manufacturers are different, and the shortcut keys to enter the BIOS are different. Have a plenty of F2, have a plenty of F 10, usually start at the low end of the screen. After entering the BIOS, don't change it casually, because everything in it is very important. If you make a mistake, you may not even get into the system. We just need to change the order of the drive letters when the computer starts. It's hard to say how to find this, because BIOS settings will be different for different motherboards. Generally, under the boot label, just set the CD-ROM drive to start the computer. There will be relevant prompts on the right side when BIOS is set, and novices can follow the prompts. Don't restart when you are finished. Put the installation disk into the CD-ROM drive, and then press F 10 to save and restart. At this time, you should pay attention to observation. When starting, the computer will first check the CD-ROM drive, and a line of characters will appear at the bottom of the screen, indicating that you can press any key to start the CD-ROM drive. Click on it, hear the CD-ROM drive start running wildly, and the process of installing the system officially begins! In the installation system: look at the prompts on the screen, because they are all in Chinese, so there is almost no need to introduce anything. First, users need to choose whether to install a new operating system or repair it, choose to install a new operating system, and then press F8 to agree to those protocols, and the drive letter selection interface will appear. Use the up and down keys on the keyboard to move the cursor to the drive letter to be installed, press the "D" key, and the system will prompt that deleting the drive letter will delete all data, regardless of it, and then press the "L" key to confirm the deletion. When finished, the screen returns to the previous interface. Then select "Install WindowsXP on the current disk" and press Enter. You will be prompted to format the disk. Select "Fast NTFS Format" and the formatting interface will appear. When the progress bar reaches 100%, the computer will automatically load the installation files in the CD-ROM drive, which takes about 8 minutes (depending on the speed of the CD-ROM drive). When finished, the system will automatically restart. Note that the installation disk in the CD-ROM drive should be removed at this time to avoid automatic reading after restarting. After restarting, enter the installation interface again. At this point, please put the installation disk back to its original place and continue the installation. You hardly need to make any settings. Click "Next". But there is a process of entering the serial number in the middle, which needs to be done manually. This process takes about 40 minutes, during which the screen will display some related functional information about windowsXP, so you can pay attention to it. When finished, you will be prompted to take out the installation disk. After you take it out, restart it, and by the way, enter the BIOS to change the boot order back to the hard disk boot, and basically complete the installation process! After installing the system: Generally, drivers of common hardware have been installed after entering the system, but not all of them. At this time, the user needs to install it himself. First check which drivers of the machine are not installed! Right-click My Computer, select Properties, and then click Device Manager in the Hardware tab. Anything with a question mark icon in front of the device indicates that there is something wrong with the device. Double-click the installation driver according to the above prompt. Until all the previous "question marks" disappeared. Drivers that need to be installed generally include graphics cards, sound cards, network cards and cats. Some advanced machines also have drivers for adapters such as infrared and Bluetooth.
The following are some optimization settings of the system. If your machine configuration is not high, I suggest you do as I say.
1 & gt； Right-click the screen and select Properties. Click the "Appearance" tab, select "Windows Classic Style" in the "Appearance and Buttons" drop-down menu, and then in the "Settings" tab, adjust the case of the screen resolution according to your personal preference, generally 1024*768. If you use an ordinary CRT monitor, you need to click the "Monitor" tab again and adjust the "Screen Refresh Frequency" to "85 Hz". Click OK! Does the screen look much more comfortable?
2> Right-click the taskbar, select Properties, and select the check box before Show Quick Launch in the Taskbar tab. Then click the "Start Menu" tab, change the menu category to "Classic Start Menu", and click "OK" to see if it is more comfortable now. Hey, personal feeling! )
3> Right-click my computer and select the Advanced tab. Click the Settings button in the performance item. Click "Adjust to Best Performance" in the visual effects item, and then select "Use common tasks in folders" from the following options. As shown in the following figure: do this well, then click the advanced tab next to the visual effect, and click the setting button at the virtual memory. In the property box that opens, first position the cursor on drive C, click "No Paging File" below, then click drive D (click the drive with more space on the machine), enter the corresponding value in the custom size, click the "Settings" button next to it, and then click OK. As shown in the following figure: the setting of virtual memory depends on its own memory capacity! Generally, it is 1.5 times the capacity of the memory itself!
4> Right-click My Computer and select the System Restore tab. If not, select "Turn off system restore on all drives", most people don't need it!
5> At this time, you will find a "shield" icon on the system tray in the lower right corner of the screen, which is the security center of WindowsXP. Double-click to open it. When you don't have your own antivirus software installed, you can open "firewall" and "virus protection" at the same time. This will be relatively safe!
6> When you are finished, click Start and select windows Update. At this time, IE will be automatically opened to connect to the Windows upgrade website, and the steps are essential! After the upgrade is completed, you may need to restart your computer.
7> Open any folder, click Tools from the menu bar, and then select Folder Options. Click the View tab, and uncheck three categories: Do not cache thumbnails, remember the viewing location of each folder, and display prompt information when the mouse points to a folder or desktop item. Click "Apply to all folders" above, and then click "OK"!
8> Right-click IE, select Properties, click Use Blank Page in the General tab, and then click OK! The last words are here, and our novice installation system has basically been introduced, but I also want to remind you of a few points:
1 & gt； Antivirus software must be installed, updated frequently, and disinfected regularly. Don't think that you won't be poisoned if you don't mess with the website.
2> system must be patched. Microsoft releases patches in the second week of every month, and then it must be updated according to the method I mentioned above.
3> Don't download and install software indiscriminately. The download links provided by many informal websites may be infected with viruses or bound with a bunch of junk software. Be sure to check the options and check the unnecessary software when downloading.