To install from the CD, please set the BIOS so that the system can boot from the CD. The method is as follows:

(1) Start the computer. When the prompt message "Press DEL to Enter BIOS Setup" is displayed on the screen, press the Del key on the keyboard.

Key to enter the BIOS setup interface of the motherboard.

(2) Select the advanced BIOS function option, and then press Enter to enter the setup program. Select the first boot device.

Item, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that the system can start from CD instead.

(3) Return to the main menu and save the BIOS settings. (the saving method is: press F 10, and then press y).

(4) Then put the CD into the CD-ROM drive and restart the computer. The system will boot from the CD and the installation wizard interface will be displayed. you can

Follow the prompts to set up the installation step by step.

After Windows XP copies files to the hard disk and restarts the computer for the first time, you must remove the CD from the CD-ROM drive, otherwise the system will still

Booting from the CD will loop through the installer.

Method 2:

Then, press any key to enter the CD boot mode and load the mini version of the operating system.

Then, press Enter to confirm the installation.

Then, press F8 to accept the license agreement.

Then, choose the location to install, choose a large enough space, and press enter.

Then, select the file system, recommend NTFS, and press Enter.

Then, you will enter ScanDisk and copy the installer to your hard disk.

Then, the computer will restart after 15 seconds, and press Enter to restart immediately.

Then, continue the installation process from the hard disk. At this point, the graphical interface mode starts.

After a series of hardware tests, you will enter the region selection prompt, where you can configure the language, keyboard and region.

Then, you will be prompted to enter the user name and organization name and generate a computer name that you can change.

Then, you will be prompted to enter the product registration code.

Then, you will be prompted to enter the administrator password.

Then, the component selection box will be displayed to select the Windows component to install.

Then, you will enter the setting of time zone and time.

Then, enter the network component installation (if your computer has a network card and is correctly identified in the hardware test).

After configuring the network, the computer will detect and install a series of Windows components and services.

Then, restart and run the newly installed Windows.

Then, enter the final stage of installation and monitor the plug-and-play hardware that was not detected before.

It finally works!

Method 3:

Install the system (take WINDOWS XP as an example below)

I chose a complete Windows XP installation CD without any cracking. Start the computer, when "Press any key to start the CD" appears.

Enter, start copying the installation program, and check the capacity and format of the system disk location, which can be ignored; There is something wrong with the system hard disk.

What is the best choice of file format? 32 years old, don't choose NTFS. Despite the stability and speed of xx's NTFS file system and hard disk management

The management function has been greatly improved, but ntFS only supports Windows NT, Windows2000 and WindowsXP with NT as the kernel, and does not support DOS.

, WindowsME, Windows98. So it is not suitable for those of us who often play software. In case of system crash, there are

You may need to re-install the system by repartitioning and formatting. As long as you re-partition, the data and information on the hard disk will be completely finished.

Yes This is the lesson I learned from countless losses. I used NTFS system when I used Windows2000, mainly to prevent it.

CIH virus is very destructive to the system and hardware, but it is too easy to prevent and kill CIH now. On the contrary, under the FAT32 file system, as long as there is one

You can reinstall the system by formatting disk C on the startup disk of 98 or Me, and you are not afraid of losing all the data on the hard disk. (About partitions,

I won't talk about it here. I will talk about zoning later, including the actual practice of FDISK and DM. Zoning is a dangerous and troublesome thing.

Love)

Next, copy the system files and prepare for installation. The dialog box for selecting time zone and language appears, and I don't need to say it. wait patiently

.

If XP was originally installed under DOS, you must first put the smartdrv.exe file (in the installation directory of Win98, named

Smartdrv.exe) to 98 boot floppy disk, run before installation, can greatly improve the installation speed. I sometimes before installation.

When it gets away, sometimes it doesn't make much difference. Maybe my computer has a large memory? I can't tell)

If you reinstall XP under the condition that the original system is unchanged and xx on the system hard disk is the system, there will be an "L" during the installation process.

Level/new installation dialog box, at this time you must choose to upgrade, unless you want to install dual xx system on your computer.

If a serial number is required, please enter the following numbers:

BX6HT-MDJKW-H2J4X-BX67W-TVVFG

This registration code can basically be installed (I have tried at least 5 or 6 XP installation disks). Generally, the installation time does not exceed 60 minutes.

After installation, choose not to activate now and activate later. Click Next and fill in at least one name, such as JixXP, and then press Enter all the time.

Yes

Now start to activate the system: I used the activation method of Russian hackers. Please refer to the following instructions:

Method: copy SETUPREG. HIV is copied to the directory of %systemroot%system32.

Overwrite the original file (I can't find this SETUPREG. HIV, but I posted it directly).

Restart,

Press F8 to enter safe mode, log in as an administrator,

Run CRK WINXP. EXE, restart, enter WinXP, select "Mobile Phone Activation" when asking for activation, and fill in each box.

"40111"-activation succeeded!

Western electronics companies provide downloads.

Needless to say. I can only tell you one word: great! ! !

4. Necessary setup and installation of some drivers.

(1) Enter the control panel (or right-click my computer and click Properties), open the system and select System Restore.

, choose to turn off the recovery function of all disks.

(2) In the system, click Advanced to reset the error report (if this option is not turned off, it always appears in front of Bill Gates.

The complaint application form is very annoying)

⑶ There are sound cards, video cards and cat drivers for general notebook computers, which can be installed automatically. Let me focus on the desktop.

Click on the control panel, click on the system, click on the hardware, click on the device manager, and put the items with question marks and exclamation marks in.

All projects are uninstalled, and then click OK to close the System project.

Take out the drive disk you carry with you and put it in the CD-ROM drive. Click Add Hardware in the Control Panel again. When the selection dialog box appears, you

If you know the directory and location of your drive, you can choose it manually; If you don't know, please select automatic.

Sound card, video card and cat driver are all the same. If you don't have a special XP driver, there are two ways to solve your problem.

First of all, you can install XP and 2k kernel by using Win2k (that is, Windows2000) driver of plug-and-play device.

There is no difference between drivers. During the installation process, a dialog box without Microsoft signature may appear. Ignore it and just click Yes.

; If you don't even have a Win2k driver, there is only one way. Find out the manufacturer and model of your equipment first, and give a general explanation.

Print the manufacturer and model on the book or board, and then visit the manufacturer's website from a computer with Internet access to directly select the model.

Download. Then use floppy disk or USB flash drive or mobile hard disk to transfer to the computer for installation. The floppy disk has a small capacity, so I'm afraid it won't fit. )

(4) Graphics card settings

Click Display in the control panel, and other options can be selected according to your computer. The best pixel is 800× 600,32 true color.

Color. Click Advanced, and then click Monitoring. The screen refresh frequency of cathode ray tube display is 75HZ or 85HZ, and that of liquid crystal display is 60HZ.

.

5] Set the network connection.

I won't talk about broadband settings, just dial-up Internet settings.

Click Network Connections in Control Panel, click Create New Connection, click Connect to the Internet, and then click Manual Settings.

Click "Modem" and add a name, such as * * *, phone number, password and verification password. You can continue.

The net is gone.

[6] Sound Settings

Click the sound and audio devices in the control panel, select the volume icon in the taskbar, and then click Apply; As for other options,

, you can make relevant settings according to the actual situation of the computer and your own hobbies.

5. Restore the mailbox, account number and address book.

According to the menu steps when exporting, change the original "export" to "import" and do xx. I won't repeat it, hehe,

If you can't do anti-xx, you are really stupid, so don't read this article. )

Step 6 restore fonts

Open the backup font information. If there is a recovery program, click it directly. If not, replace it directly. I mainly aim at intelligent ABC.

And purple pinyin input method. I haven't used other input methods, so I'm not familiar with them. You'd better study them yourself.

7. My document has been reset.

Repeat the above steps when exporting, just merge and link the two folders.

8. It is recommended that you install the following utility software on your computer:

(1) WinZip 8. 1 (general compression software)

Winrar 3.2 (the best compression software)

(3) Microsoft Office XP (International Office System)

⑷ AcadSee5.0 (graphic recognition software)

Jinshan 2003 (Instant English-Chinese Translation Software)

Kingsoft Internet Security 2003 (the best antivirus software in China)

(7) Once Winamp 2.8 (the best Mp3 music playing software)

Being ⑻windvd 4.0(DVD, VCD audio and video playback software)

Levies flashget1.40 (the best online download tool)

The above softwares are all my favorites. Generally, it can be downloaded from the Internet. Office XP, Kingsoft Internet Security, Kingsoft Internet Security and other software. also

The big one, you'd better buy a CD to install.

In addition, it is best to install a system optimization software. Domestic system optimization software is the first to promote Windows optimization master (Author: Lu

Gold) and super rabbit magic settings (Author: Cai Xuan). WindowsXP itself has been highly optimized, and it is no longer practical to optimize the system.

International significance. But WindowsXP doesn't set the secondary cache of CPU, so you can use either of these two softwares for optimization. Like my pen.

The CPU secondary cache of the notebook is 256K K K. I didn't reset it in the registry, but set it with rabbit magic.

9. Finally, defragment the disk.

Open my computer, right-click C:, click Properties, click Tools, click Start Finishing, and finally.

Click "Defragment" and click "Confirm" when you are finished.

At this point, the installation is complete.

Method 4:

Installation of Windows XP

Windows XP has done a very good job in upgrading and installing, and there are also three installation methods: upgrading and installing, dual-system storage and installing, and

New installation. We can successfully upgrade to Windows XP on the basis of previous operating systems such as Windows 98/98 SE/Me/2000.

The core code of Windows XP is based on Windows 2000, so it is very easy to upgrade and install from Windows 2000.

The following describes the installation of Windows XP.

1. Put the CD in WINDOWS state to run automatically, ask if WINXP is installed, and select "Install Windows XP" with the mouse.

.

2. You can select "Upgrade (Recommended)" and "New Installation (Advanced)" in the check boxes. Upgrade cannot be used when the language versions are inconsistent.

",only new clothes. There are no system compatibility issues in the new installation.

3. Accept the agreement and enter the registration code.

4. Choose to support other East Asian languages (install East Asian language support), including Chinese.

Language selection is "Chinese (China)".

5. Click the Advanced Options option in step 5.

6. Enter the installation source directory in the text box required for "Copy installation files from this folder";

7. Enter the installation target directory in the text box required by "Go to this folder on my hard disk", and pay attention to the target directory.

There is no drive letter. If you want to choose which drive letter to install, please check "I want to choose to install" below.

Drive letter and partition during installation.

8. "Copy all installation files from the installation CD" means to copy the files on the installation CD to the hard disk. exhaust

Generally, the whole installation source file will not be copied to the hard disk during disk installation, but a list of copied files will be established during installation and copied according to the list.

9. "I want to choose the installation drive letter and partition during installation" is used to change WINXP.

Installation directory.

10. The "Accessibility Options" option in step 5 is an accessibility option (for people with disabilities).

A) Select "Use Microsoft Magnifier when setting" as "Use Microsoft Magnifier", and the font will be displayed very large.

B) Select "Use Microsoft narrator during installation" as "Use Microsoft narrator", and each step has English voice prompts.

, very clear.

1 1. After restarting, select "Install Windows XP now and press ENTER" to install WINXP.

12. For disk format conversion, select "To convert the drive to NTFS, press c" to convert the FAT (or FAT32) disk grid.

Convert the formula to NTFS format and confirm the conversion to "C". Select "Select a different partition for windows XP,

Press ESC to reselect the partition (click ESC).

13. Enter the installation, copy the file, and display the progress of copying the file.

14. After copying the file, the disk format will be converted and the disk format will be converted to NTFS. After the conversion, it will be restarted once.

Reboot one more time than not converting the disk format. After starting the test, you can see the XP interface.

15. Select "Region and Language". When you install the English version of XP and want it to support Chinese, the options on this screen are more important.

A) Tip at the top: Set "Standards and Formats" to "English (USA)" and "Location" to "USA". If you want to do it,

English XP supports Chinese (Chinese package is not installed), just click "Customize" and then set "Standards and Formats" to "

Simplified Chinese (China) with location set to "China".

B) Hint: The default language and method of text input is American keyboard. If you want to view or change it, please click "Details" and select.

"Install files in East Asian languages", English XP can support Chinese, and you can choose "China" and "Chinese" in "Region and Language" above.

Text ".

16. Enter the registered name and company/organization name. Later, when you right-click my computer and select Properties, you will see these contents.

Information.

17. The "Text and Input Language" setting page is used to set the language and input method.

18. Enter the computer name and system administrator password. XP does not use administrator login when it starts normally, and only exits in "Safe Mode".

Now (only system administrators can log in in safe mode).

19. "Date and Time" setting: The drop-down box below is to select the time zone. In China, you should choose "(GMT+08: 00) Beijing Chongqing".

Urumqi ".

20. Network Settings: "Typical Settings" is generally selected. If you need other protocols, such as IPX, NetBEUI, etc.

, click "Custom Settings" below. This can be changed in the future network properties, and need not be set here.

.

2 1. Install the selected installation components, help files, etc. , and install the [Start] menu item, register components, save settings and delete.

Except used temporary files. After restarting, enter the dazzling screen of WINXP (WINDOWS XP needs to be set).

22. register. Generally choose "Do not register now".

23. Enter the user name to use this computer, which will appear in the list when logging in. Can also be installed in the system, in the "control"

Panel-User Accounts. The user name entered here has the authority of system administrator, and there is no password. You need to enter it in User.

Account "to create passwords and change permissions. At least one should be entered. It is recommended to enter only one and add it later.

Method 5:

The purest new system:

Step one:

To download EVEREST Professional, please check your motherboard, memory and hard disk first.

Step 2: Scan the boot area of your hard disk, and send some important data to the network hard disk or transfer it away with a USB flash drive.

Step 3: As long as your guidance area is OK. All the useful materials have been removed. You should prepare a DOS startup disk or an installation disk of WIN XP.

Step 4: restart, start the CD, format all your hard disks, not just the system area, or simply install them, but

Fully formatted, repartitioned, and installed. It only takes about 30-40 minutes.

Step 5: After entering the system, don't panic and install the driver. First, press Run: Start/Programs/Accessories/System Tools/System Information, and select under the Tools menu.

Microsoft's "file signing utility" can check whether there are any unsigned files in your new system. There is reason to say that if

Your WIN XP is genuine and should be signed. If yours is pirated, it is not excluded that the pirated disc itself contains Trojan horses.

Possibility, it is suggested that if you encounter an unsigned one, send it to the forum and ask the master if you can delete it. If yes, delete.

Step 6: After pressing the driver, immediately download a Kaspersky version 5.0 machine and upload it to their official website:

Remember to download the authorization key when downloading. You can use it for free for one month. In my opinion, it

It is the best anti-virus software, providing free download. Most importantly, this will ensure that your system will not be reinstalled in the first place.

After the system was infected by virus.

Step 7: Scan the virus with Kaspersky, the highest level, and scan for about 20 minutes. If it is confirmed that there is no virus, congratulations, yours.

Love machine is reborn.

Step 8, patch SP2 immediately. Pay attention to the Microsoft website and don't download it from other places.

Step 9: Download Skynet Firewall immediately, and the trial version is enough.

Step 10: Find a genuine antivirus software that can be used permanently. Kaspersky itself is really good and has a good reputation, but the price is a pity.

It's too expensive, even if it costs 450 yuan, temporary emergency is ok. It doesn't matter if you don't care about money I was poisoned once and used Rising and Jiang Min.

The latest version, no poison found, use Kaspersky to find it. Generally speaking, Rising and Jiang Min 2005 are enough. Think about it yourself.

.

Pay attention. In the process of the above 10 steps, basically put an end to any piracy (I dare not say your operating system), so I made a new one.

The system should be pure. Please do not browse other irrelevant websites or download or install other programs locally before completing the above steps 10.

Finally, I believe that 99.9% of viruses, after such a toss, 100% have been completed on your computer.

Really perfect SP2 activation method.

-Up to now, SP2 upgraded version of windowsXP Professional is the only feasible activation method.

This is the only one found through comparison verification since the official version of Simplified Chinese of windows XP SP2 was released on August 24th, 2004.

A trip to SP2 activation method-personally:)

First download the official simplified Chinese version of windowsXP Professional and Service Pack2.

Then install the official simplified Chinese version of windowsXP Professional and Service Pack2.

Finally, activate Windows XP Professional Service Pack 2.

Specific steps:

The first step, please prepare three necessary tools:

Counter 1, 4in- 1

Quite efficient and accurate Microsoft serial number counting program, fast, and almost all the calculated serial numbers are legal.

This counter can "count" four versions of Windows series: Windows XP Professional and Windows XP.

Major. VLK is the Shanghai government edition, Windows Server 2003 VLK, Office XP. (Note: You'd better include the figures.

Fill in other numbers in the "Random Seed" column as random seeds. )

(You can go to the Microsoft website to test the legality. Method: My Computer-Help Menu-Select "This is a legal copy of Windows" or go through.

Test website: click

Verify the button now, and then download the ActiveX control according to the prompt. Thank you! This painting is to pass the inspection, then

Congratulations, the WindowsXp SP2 you are using is genuine! )

No.2, XP directory finder Keyfinder 1.4 1

This software is used to view and change CDKEY, mainly to change the installation order that has been marked as "illegal" by Microsoft's activation server.

No.:)

No.3, online activation program 1.0

At present, the activation mode of SP2 must be activated online. This program is an effective online activation mode developed in the era of SP 1, although it is determined by SP2.

Generation, there will be an error prompt when activating, but it is still the only effective method to ensure the smooth detection of Microsoft activation server.

Preparing these three tools is the only necessary way to activate Xp SP2 at present.

Step 2, install WindowsXP Professional and SP2:

1, install WindowsXP Professional. Please note that the installation serial number must be calculated by the 4-in-1 1 counter, which can be calculated and recorded before installation.

In case of emergency, it is best to fill in random seeds at will and click Generate to generate them.

(The reason why we don't recommend the serial numbers provided in the pirated CDs and download installation packages now is because many people are using them, because the same

The user market of serial number is too big, and it is easy to be blocked by Microsoft! :)

(The reason why you randomly fill in random seeds and click Generate is to prevent lazy D users from using 0 to generate seeds.

The serial numbers are the same, so there is a conflict:)

Second, install the official simplified Chinese version of SP2. Please note that WindowsXP does not need to be activated before SP2 is installed.

Step 3, activate SP2 version of WindowsXP Professional:

* * Suggestion: It is best to make Ghost clone backup when it is not activated.

* * Run the online activation program 1.0 (key step! ! ! )

(1) Click on a slightly stingy window with the mouse:)

(2) Wait:)

(3) After the activation window appears, please select "Activate via Internet".

(4) You can choose not to register (you can also register, username and password, email verification code ..., which is very troublesome:)

(5) Fill in the serial number used in the last installation.

(6) point retry

(7) An error prompt appears (this step must be ignored, which is normal)

(8) Restart the computer

(9) Don't run the activation window in the start menu directly.

(10) Run online activation again 1.0.

(1 1) There are two situations at this time: a. Prompt that windows has been activated! (You can skip to step 2 1:)

B. There is no success prompt, but the previous interface is repeated, so please don't worry, you only need one round:)

(1 1) still select "Activate via Internet".

(12) Not registered

(13) Pay attention here! ! ! Instead of "Fill in the serial number when installing" or click "Retry", click "Phone".

(14) Select "Change ID"

(15) Use 4in 1 calculator to calculate the new serial number.

(16) Fill in the newly calculated serial number.

(17) point "Update" (18) has an error prompt and is still ignored.

(19) Restart the computer.

(20) Run online activation 1.0 again.

(2 1) The second step should prompt that activation is successful!

At this point, WindowsXP Professional SP2 has been successfully activated. If you still don't succeed, please keep repeating the above 8~20 steps until you lose patience.

Cardiac arrest:)

* * * Suggestion: Finally, at this time after activation, on the premise of backing up important personal data and files in the partition where XP is located, change the system day.

Period (at least 3 1 day, next month, what if there is no month to activate? ; ) and then restart, and see if I can log in smoothly.

Activate the prompt. If you log in normally, your XP SP2 is really fully activated!

Look at this. If you have any questions, give me information.

In addition, the group IDC has many products online, which are cheap and have a good reputation.