If there is one, just check the box and adjust the feathering value to within 5, and then copy and paste it and move it to the word "English" to be modified.
In addition, the stamp is easy to use, but as a beginner, it is often difficult to use it skillfully, so the modification is not good
2. If there is no Chinese character that can be copied on the chicken source file, you can only enter the Chinese character. However, after the input, it should be modified according to the color of the text on the source file
Question 2: How to use Meitu Xiu Xiu to modify the original text on the picture and blur it with the background, and I don't think it's good for the mosaic (because there are transparent squares), or you can block it with ornaments and other non-mainstream prints, or block it with a border. Also, you can change the scene with matting. That's probably all there are. You can try grinding the skin a few times. If there are any more, if that text is on the side, you can try cutting it out. To sum it up, wipe it; Block; Hey; Cut; Grinding ... At present, the amount I have worked out by myself ... Welcome to adopt! O(∩_∩)O
Question 3: How does ps modify the text on the picture? 1. After opening the PS software on the computer, click the "File" menu in the top menu bar and select "Open" from the pop-up options. (as shown below)
2. Then go to the local folder, find the picture whose text needs to be modified, select it and open it. (as shown in the figure below)
3. After opening the picture whose text needs to be modified, you need to erase some of the text. At this time, select "Imitation Stamp Tool" in the tool list on the left. (as shown in the figure below)
4. After selecting the imitation stamp tool, press and hold the Alt key near the picture text for sampling, and then click the text to be erased with the mouse to cover it. (as shown in Figure 1 and Figure 2 below)
5. After some words are erased, click on the text tool T, and select the horizontal text tool according to the text arrangement that needs to be modified. (as shown below)
6. Use the mouse to select the text area where you need to add text, and then enter the text to be modified. (as shown in the figure below)
7. After entering the text, adjust the font and size of the added text, preferably the same as the original text, so as to keep all the words in the whole picture in harmony. (as shown below)
8. After the modification is completed, click on the text menu, and then select the corresponding storage method in the pop-up option setting menu. (as shown below)
Question 4: How can Photoshop replace the words on the photos in JPG format? There are many ways ~ ~ ~
just say one! Select the patching tool in the toolbar on the left.
Then check the text to be covered, and then edit the new text there
!
Question 5: How to use the drawing tool to modify the text on the picture? Many friends see the beautiful pictures in other people's message stickers and want to quote them, but some pictures have been added with some text or signatures. How to modify the text and signatures on the pictures to become their favorite content? Many friends have been asking me this question. Here I introduce a simple method to modify the text on the picture for your reference. Of course, it may be more beautiful with other software, but this one comes with the system and saves the trouble of downloading. I believe everyone knows. (1) First run the software: click Start-All Programs-Accessories to see the Drawing tool. The following is the operating interface of the software. (2) Import pictures: click File-Open in your computer picture collection, and select a picture with words that you need to modify. (3) Clear the words on the picture. It's best to connect them together when painting. (4) Fill the color. (5) Add text to the picture: Click Toolbox capitalization and drag out a rectangular box on the picture. Set the font, font size and font size in the pop-up Text Toolbar. Select the font color you like in the color box below. If the Text Toolbar is not displayed, click Text Toolbar on the View menu. The "Text Toolbar" can be dragged to any position in the window, and the color of the text is defined by the foreground color. If you want to make the background of the text transparent, click the transparent button, and if you want to make the background opaque, you can choose to define the background color. Click the opaque button, and you can only see the transparent and opaque buttons after clicking the capital A. In the toolbar, the transparent button is located at the bottom (hehe, transparent and opaque are the words you want to write, and there is no white or other background color on the picture) by default. The upper color box represents "foreground color". The lower color box stands for "background color". To set the Foreground Color, click a color in the color box. To set the Background Color, right-click the color in the paint box.
question 6: how to replace the words in the picture with other words? What's the matter, p Go to Photoshop at 1 minutes, then use the imitation stamp tool, select the imitation place with slt+ left mouse button, and then hold down the left mouse button and drag on the text you want to erase
Question 7: How does PS modify the original text on the picture? The following is the specific process. 1. Use the imitation stamp tool to remove the text.
this is a common method. The specific operation is to select the imitation stamp tool, hold down the Alt key, click on the phase, similar color or pattern in the area without text, and then drag the mouse to copy in the text area to cover the text. It should be noted that the sampling point is the starting point of copying. Choosing different brush diameters will affect the drawing range, while different pens and brush hardness will affect the edge fusion effect of the drawing area.
2. Use the patching tool to remove the text.
if the background color or pattern of the picture is consistent, it is more convenient to use the patching tool. The specific operation is to select the patching tool, select the patching item as "source" in the public column, and turn off the "transparent" option. Then use the repair tool to frame the text, drag it to the position with similar color or pattern in the area without text, and release the mouse to complete the copy.
The patching tool has the function of automatically matching colors, and the copied effect has a soft transition, which the imitation stamp tool does not have.
3. Use the repair brush tool to remove the text.
the method of operation is similar to the imitation stamp tool. Hold down the Alt key, click on similar colors or patterns in the area without text, and then drag the mouse to copy in the text area to cover the text. Just like the repair tool, the repair brush tool also has the function of automatically matching colors, which can be selected according to needs.
question 8: how to change the text in the photo into other text? first, use PS to open the picture to be processed, and it is recommended to use PS6 and above software to operate it.
Select the Content-Aware Mobile Tool in the Toolbox to open the extended menu by long-pressing the corresponding icon.
Use this tool to check the text to be cleared and drag it to the background position to be displayed. At this time, the original place of the text will be filled with the current background.
next, press the "Delete" key on the keyboard to delete the selected text, and press "Ctrl+D" to cancel the selection.
Use the same method to delete other words in the picture, and pay attention to the fusion effect of the background when removing them.
Finally, you can modify the words on the picture by adding your favorite words to the picture.
question 9: how to replace the text in the picture? use the stamp imitation tool in photoshop to remove the text from the picture first, and then write your own text. Of course, if you have a layered psD source image in your hand, you can directly modify it after opening it with PS and save it as jpg or gif format.