Production workshop management regulations I. Production organization
1. The production department should equip the production team in the workshop with the best combination of production workers according to the production characteristics of the company's products and the quality of employees to improve production efficiency. Select the most suitable person and the most suitable work order to complete the production task. Emergency preparedness measures should be taken in time when personnel are insufficient.
2. Considering the appropriate management scope, each team should not exceed 10.
3. Workshop management level is Grade II. Production department and production team. Each production team has a person in charge. Each production worker is only responsible to one direct supervisor. Production tasks are assigned by the production department to the production team to arrange production procedures.
Second, the production management
1. Various measures should be taken to fully mobilize the enthusiasm of workshop workers, absorb relevant suggestions and opinions, continuously improve working procedures and improve production efficiency.
2, according to the actual situation of the production site, reasonable choice of machine material placement position, improve the efficiency of logistics management, improve work efficiency.
3. In order to ensure that the production organization system is always in a balanced production state most of the time, production managers should pay attention to the following points:
(1) The responsibilities and scope of work of each employee should be clearly defined.
(2) The arrangement of production tasks must be clear.
(3) Study the rationality of production technology. If possible, try to draw a flow chart, show the production operation steps of products, and compare the availability of energy and the capabilities of various equipment. And made some feasible production plans.
(4) Check the supply and storage of required materials, competitive supply sources and alternative materials.
(5) Determine the services required for maintenance, material handling, daily work, control procedures and transportation.
4, production succession management
(1) During the succession, the personnel of both parties shall conduct a * * * serious and comprehensive inspection on the operation of all equipment and instruments.
(2) The successor should arrive at the work place on time and be prepared for the succession. Successors should carefully consult the succession records and listen to the succession situation.
(3) When the successor can't arrive on time, the person in charge of the workshop shall report to the person in charge of the succession, but shall not leave the post without authorization until someone takes the place.
(4) In case of an accident during the shift change, the handover formalities shall be handled after the accident is handled, and the successor shall actively assist the successor in handling the accident.
(5) Once a successor appears? Handover record? After signing, it means yes? Record? Recognition. Such as the actual situation and succession? Record? If there is any discrepancy, the heir has the right to refuse the visa.
(6) Each shift must be filled in carefully before coming off work? Handover record? Otherwise, it will be punished according to relevant regulations.
Third, job responsibilities
1. Job responsibilities of production workers:
(1) unconditionally obey the arrangement and deployment of the leader.
(2) Smoking is strictly prohibited in the production workshop and warehouse.
(3) Go to work on time and work overtime as required.
(4) Don't do anything unrelated to the job at work, and don't leave or join the job casually. Wear work clothes and work hats during working hours.
(5) Workshop workers are not only production operators, but also equipment maintenance, repair and loading and unloading workers. In principle, when loading and unloading cars, everyone must work together in Qi Xin.
(6) Take care of all the company's property, love your job and constantly improve your work level.
(7) Do not take the company's property home without authorization.
(8) Before each shift comes off work, the whole workshop work site must be cleaned and arranged.
2, production workshop team leader responsibilities
(1) Organize the production of this shift according to the production tasks assigned by the company.
(2) In the production process, be fully responsible for the personnel transfer of the team and reasonably arrange all employees to engage in production and other affairs.
(3) Be responsible for the opening, closing and normal operation of the whole workshop equipment, and operate in strict accordance with the operating procedures of each machine.
(4) Responsible for organizing personnel to maintain and repair all machinery and equipment, and make original records.
(5) Be responsible for the declaration of equipment wearing parts.
(6) Do a good job in every class? Production records? 、? Handover record? And then what? Finished product warehousing? Program.
(7) Lead the staff of this class, consciously abide by the company's rules and regulations, and strictly implement the quality standards.
(8) Do a good job in safety production and put an end to all kinds of accidents. If there are signs of accidents, report them in time and actively try to eliminate them.
3, the operator job responsibilities
(1) Prepare materials in strict accordance with the formula of the technical department, and accurately measure the weight of each small material variety.
(2) Ensure that the variety and weight of small materials added in each batch are correct.
(3) Collect all kinds of raw materials in strict accordance with the picking procedure, and don't move around casually.
(4) Before each shift goes to work, clean up the powder under the ram and call it back in accordance with the regulations.
(5) The iron impurities on the permanent magnet cylinder should be cleaned before each shift comes off work.
(6) After each batch of raw materials comes into play, the work site must be cleaned, and the thread, hemp rope and shredded paper should be placed in the designated place, and they are not allowed to enter the production line.
(7) Assist the quality controller to check whether the sensory quality of each package of raw materials is qualified.
4, receiving, measuring job responsibilities
(1) Before the production of each shift, get the packing bags of the required varieties from the warehouse keeper.
(2) Stamp the feed name, production date and production batch number on the package.
(3) When measuring, it is required that each package of finished materials is within the allowable range of weighing error.
(4) Clean the cleanliness of the measuring ruler frequently, and adjust the zero frequently.
(5) Supervise whether the sensory quality of the finished feed is qualified, and report to the quality inspector on duty in time if there are sensory problems of the finished feed.
5, packaging, sealing, stacking job responsibilities
(1) Before going to work, prepare sewing thread and adhesive tape for shift.
(2) No nail leakage, uniform stitches, flat seams and double fold lines are required during packaging. The sealing requires the self-adhesive to be firm and smooth.
(3) When finished materials are stacked, they must be stacked according to the position and stacking height specified by the warehouse keeper.
(4) Before each shift goes to work, the sundries under the primary screening of powder must be cleaned up and put in the designated place.
(5) Before each shift goes to work, the interior of the sewing machine must be cleaned, and the oiling part must be lubricated.
6. Job responsibilities of stevedores
(1) must obey the arrangement of the warehouse keeper, be on call, and load and unload at any time.
(2) When loading, load according to the variety, location and quantity specified by the warehouse keeper, and assist the warehouse keeper to record the loading quantity.
(3) When unloading, unload at the designated place according to the stacking height required by the warehouse keeper, and assist the warehouse keeper to record the unloaded quantity.
(4) The unloaded goods should be stacked neatly and firmly, and no one is allowed to dump them.
(5) Carefully clean up the unloading site.
Fourth, the punishment measures
1. Smoking is strictly prohibited in workshops and warehouses. Offenders will be fined 50 yuan, and those who refuse to change their education will be punished even more severely. 2. Don't be late for work, and those who are late within 5 minutes will be fined 5 yuan/time; Those who exceed 5 minutes are deemed to be absent from work. One day of absenteeism, two days of piecework pay will be deducted. 3. Those who don't go to work without asking for leave are regarded as absenteeism. Those who are absent from work for more than three days in a row are deemed to have left their jobs automatically. 4. Playing cards, playing chess and other things unrelated to work are strictly prohibited during working hours, and offenders will be fined 5 yuan every time. 5. It is forbidden to sit on finished feed and feed packaging bags, and offenders will be fined 2 yuan every time.
6. If you don't clean the workplace before coming off work, you will be fined 2 yuan every time.
7. Each shift must check the screen of the pulverizer according to the regulations and do a good job? Handover record? Otherwise, everyone will be fined 2 yuan every time.
8. The feeding section should accurately measure the quantity and weight of each batch of raw materials. If the raw materials used in production do not conform to the formula, a fine will be imposed each time 10 yuan.
9. The feeding section shall ensure that each batch of materials is added with corresponding small materials according to regulations, and offenders will be fined 10 yuan each time.
10. If the raw materials used in the feeding section are obviously deteriorated and not reflected, they will be fined 10 yuan each time.
1 1, iron impurities on the permanent magnet cylinder and pulverizer must be cleaned before each shift in the feeding section, and offenders will be fined 2 yuan every time.
12. If the receiving and measuring links fail to reflect the sensory indicators of finished products, a fine will be imposed each time 10 yuan.
13. If the wrong packaging bag is used in the receiving and measuring section and the wrong production date and batch number are printed, 5 yuan will be fined every time.
14. If the measurement in the receiving and measuring section exceeds the allowable error range, 5 yuan will be fined every time.
15. The packaging, sealing and stacking sections shall ensure that the stitches of the packaging are even and tidy, and there is no needle leakage. Otherwise, 2 yuan will be fined every time.
16. In the process of packaging, sealing and stacking, if the stacking quantity is incorrect and the stacking varieties are confused (including unloading), 2 yuan will be fined every time.
Verb (abbreviation of verb) workshop vacation management
1. Under normal circumstances, leave is not allowed. For those who have to ask for leave, the company must find a replacement during the third shift of production in the peak season and report it to the head of the production department for approval.
2. Leave is in written form, with written leave slip, and oral leave is invalid.
3. No salary during vacation.
You must apply for a holiday one day in advance.