Software download:

ftp://61.129.83.38/download/649061/peterpan%CB%B5.rar It is more convenient to copy this address to Internet Express to download!!!

1

1. Computer operating system, according to YAN boss: Win200SP4, WinXP+Sp2. But I tried WINXP+SP1 and it worked, but due to the limited computer and system, I didn’t try anything else.

2. Run install.bat and close this window after running.

3. Mobile phone settings:

a. First set to modem mode: Settings - USB mode - Modem, then connect the computer with a data cable, install the modem driver, and the driver is on the random CD Look inside. The specific point is to put the random CD in the computer's optical drive before connecting the phone to the computer, and then connect the phone to the computer. At this time, you will see that the computer has discovered the new hardware and then asked you to install the driver for the new hardware. Just choose to install from the driver, just "**************** (recommended)", and then start installing MOTO USBMODEM. Note that this is to install MODEM. The driver does not match the one below.

b. After installation, the computer enters the control panel - phone and modem options - modem - you can see Motorola USB Modem.

4. Computer operation: computer start - run input cmd , press Enter. Enter echo at+mode=99 >com X on the cmd command line and press Enter. New hardware will be discovered on the computer. At this time, you need to install a new driver. At this time, the location of the driver you select is the location of the software you are downloading now. After the computer finds the driver, it will install it. After installing the driver, you can see in the hardware that there is a MOTOROLA A768 network card in the network adapter. Then you unplug the data cable, switch the phone to high-capacity mode, and create acmattch.txt in the root directory of the SD card. The content in the file is echo MotNet > /proc/motusbd. Then unplug the data cable and switch to MODEM mode, then plug in the data cable, and it will connect by itself. Enter telnet 169.254.142.2 on the cmd command line, and enter root as the user name. You can log in to the phone. The drive letter of A768 will appear in my computer. After this drive letter appears, enter \\169.254.142.2\system in the address bar to open the internal directory of the phone. But there are many problems here. If TELNET fails, please see clearly below (1. Maybe your computer does not have an address bar. Don’t worry, go to My Computer - View - Toolbar - Address Bar and check the address bar. Then you can enter the address. 2. If you cannot see the internal files of the phone and cannot open the phone after entering the address, then you can copy my address directly into the address bar of the window where this software is installed. If TELNET is successful, it must be OK! To check whether TELNET is successful, enter IPCONFIG on the CMD command line. If you can see 169.254.142.1, congratulations, it means that your TELNET is successful!

5. If all the above is successful, next time you TELNET, just click peterpan_e680 in the extracted file! But not everything will be smooth sailing. I wrote it very clearly. Some DX may think that I wrote it. It's a bit complicated! But considering that I am also a novice, I wrote it in more detail! If it still doesn't work, leave me a message at QQ48707498! This is the first time I publish it here, and it is a bit pirated by YAN boss! But please indicate when reprinting!

The following are improvement methods

1. Install the USB driver in the CD that comes with XiaoI to ensure that when Xiaoi is connected to the computer in USB mass storage mode, there will be no problem of installing new software. The hardware dialog box appears.

2. Download a USBLAN.rar program, download address: /e680/usblan.rar

3. After decompressing USBLAN.rar, there are two files. Folder - USBLAN, usblanMOTO. First double-click the btblan-demo-12b9-f001-07-05-2004 installation program in the usblanMOTO folder. It is very simple, just follow the on-screen prompts, but remember the installation path.

4. Copy all the files in the USBLAN folder to the installation path just now, overwriting the original files

5. Change the " Change USB Mode" to "Modem" and exit.

6. Connect the small I to the PC, the computer will pop up the "New Hardware Checked" dialog box, follow the instructions to complete the installation (generated by motorola usb moden). At this time, enter the computer's control panel - Telephone and Modem Options - Modem - you can see Motorola USB Modem, click Properties, and write down the com port number, such as com3, which means the port number is 3

7. Click Computer Start-run-enter cmd--the DOS dialog box appears, then enter at+mode=99 > com X (x represents the Motorola USB Modem port number you just installed in the computer.)

8. At this time, wait for the computer to automatically detect the new hardware, click "Specify installation path", and "Browse" the installation path of usblanMOTO just now, where "btblan-demo-12b9-f001.inf" is the installation file. Click to install. When the "Not certified by Microsoft signature" dialog box pops up, click "Yes" to continue the installation.

9.OK, you’re done, you can Telnet! Click Computer Start - Run - enter cmd - a DOS dialog box appears, enter telnet 169.254.142.2, the computer prompts to log in, enter root, OK, open. Or you can also enter \\169.254.142.2\system in the address bar of the resource manager to open it!

10. Next time you want to telnet, first set the USBM mode to MODEM mode on your phone, connect the data cable, and repeat step 9!

Two

The method of implementing Telnet on E680i is to replace one of the files during the process of flashing E680 to E680i. Then create an acmattach.txt file on the SD card with the content echo MotNet > /proc/motusbd. Set the USB mode to Modem, connect the phone and computer with a data cable, and the phone will turn on USB LAN. After the USB LAN driver has been installed on the computer, you can successfully Telnet to the E680i. This method has some limitations: it is applicable to the licensed machine E680i. At least so far, we have not seen the version of E680i flashed into telnet; before using the large-capacity storage mode, you need to modify the file acmattach.txt, or modify the file content, or move file to other directories.

yan0 found a simpler method, E680i can implement Telnet without flashing. Follow me:

First, make a Loader icon on your phone. For details, see ccmove: /topicdisplay.asp?BoardID=1189&Page=1&TopicID=130686.

On your mobile phone, use the mobile phone’s notepad to create a file. The content of the file: the first line is empty, the second and third lines have the following content, and a carriage return is added after the third line. Save it as a usbnet.txt file. After saving, find this file in My Collection - My Notes and rename it to usbnet.lin.

#/bin/bash

echo MotNet > /proc/motusbd

Mobile phone settings - USB mode, select Modem, connect the phone and computer with a data cable, First install the Modem driver of E680i. Point and hold the file usbnet.lin with the pen, select the open method in the menu that appears - find the application with the smiley face icon, select it, and tick "Always open with this program", confirm, the phone will open the USB LAN mode, and the computer will The USB LAN device will be discovered. After installing the driver, you can Telnet to the E680i.

If you need to telnet in the future, after connecting your phone to the computer via modem, just click on the file usbnet.lin