How to use PS to make a personal business card
Before designing a business card, you must first understand the relevant knowledge of the business card, such as size, bleed size, pixel size, etc. The standard size of general business cards is: 90mmX54mm90mmX50mm90mmX45mm. The pixels are generally above 350PI, plus the bleed size, so the document size we set during design must be: 94mm
Open Photoshop, create a new document, set the dimensions to width 94MM, height 58MM, resolution 400, color mode CMYK, and click OK. As shown in Figure 1.
2. Display the ruler (View - Ruler) in the new document, then drag the auxiliary line to mark the bleeding with auxiliary lines. In this way, you will have a clear design scope when designing. As shown in Figure 2. Sometimes for the accuracy of the auxiliary lines, you can enlarge the image and drag the auxiliary lines, which will be much more accurate.
3.
At this point, the size of the business card is basically displayed. The next step is to add elements to the document. People have different appreciation angles and different aesthetics. Today we are just doing an extensive design. The purpose is to guide how to design business cards. The specific style of the business card is left to you to design according to your own viewing angle.
Through your own conception and imagination, and by referring to other people's business cards, as shown in Figure 3, draw out the auxiliary lines as shown in the picture.
4._Set the foreground color to gray (C6c7bc), as shown in Figure 4.
5. Set the size of the pencil stroke to 5. Then use the pen tool to draw the path as shown in Figure 5 (5-1), then right-click the pen tool and select "Stroke Path". In the pop-up dialog box, select "Pencil" as shown in Figure (5-2), and then click OK. The effect after tracing the path is as shown in Figure (5-3).
6.
In order to clear the composition, remove the auxiliary lines just pulled out (except for the bleeding lines).
Then drag out the auxiliary item as shown in Figure 6, use the Polygonal Lasso tool to outline the range as shown in Figure 6, and then fill it with red. The effect is as shown in Figure 6.
7._, use auxiliary lines and the polygonal lasso tool to get the shape as shown in Figure 7.
8._Put your company’s LOGO in the position shown in Chen Bin 8. The effect is as shown in the figure.
9._Then put your company name in the position shown in Figure 9, with the font size as shown in the picture, or flexibly set the font size, color, character spacing, and English name according to the length of your company name Font size etc.
10. Then add the name, position and contact information respectively in the positions shown in Figure 10. Here, the font size is not fixed and can be adjusted according to your own situation, such as font size 6 , line spacing 8 and so on. How to make a business card template?
Question 1: How to make a business card template using word for free. The specific steps to make a business card in word2007 are as follows:
1) Open this document and select the "Page Layout" tab The "Margins" command below.
2) Click Customize Page Margins.
3) In the pop-up "Page Setup" dialog box, set the top, bottom, left, and right page margins to "0".
4) Switch to the "Paper" tab and set "Paper Size" to "Custom Size".
5) Set the width to "9" and the height to "5.4" (this is the standard size of general business cards), and then click the "OK" button.
6) Enter text, insert pictures or shapes, and a simple business card has been created.
Question 2: How to use Word to make a business card? This is very easy. WORD has this function. Click "File" and select "New", select the template on your local machine, and in the pop-up template Select other documents in the dialog box, then click "Business Card Creation Wizard", and then OK. If you cannot find the "template on this machine", then download WORD again and install them all once
Question 3: How to make a personal business card. Use Word to make a personal business card on a computer.
The specific steps are as follows:
1. Open "Word", click "File" in the upper left corner, and then click "New".
2. A new window will pop up on the right, click "Template on this computer", then select "Other Documents", and then double-click "Business Card Wizard".
3. Next create a new document, click the menu "Insert → Object", the "Object" dialog box will pop up, and select the "Microsoft Word Picture" type. Then click "File → Page Setup", in the pop-up "Page Setup" dialog box, set the "Paper Size" item in the "Paper Size" tab to "Custom Size", and then enter the paper size as the width "8.8cm" , Height "5.5cm" (5cm is also acceptable). In the "Preview" section on the right, you can see that the layout of a single business card has come out (as shown in Figure 1).
Figure 1 Define business card size
Click to switch to the "Margins" tab setting interface, set the top, bottom, left and right margins, and gutter to numbers. 0". After clicking the "OK" button to return to the Word editing state, design the content and style of the business card as needed and click the "File → Close (c) Document" menu item.
4. Letter and label settings
Create a new document, click the "File → Page Setup" menu item, and set the "Paper Size" tab in the pop-up dialog box. The "Paper Size" item is "Custom Size", where the "width" is 19.5cm; the height is 29.7cm. Then click the "Tools → Letters and Labels" menu item in sequence, and click the "Options" button in the "Label" tab in the pop-up dialog box (as shown in Figure 2).
Figure 2 Letter and label settings
Question 4: How to make ordinary business cards? You asked two questions, one is how to make business cards, and the other is what software to use.
The first question is more complicated. To put it simply, you need to lay out a single business card first, or download a ready-made business card template. The size of the finished business card is 90×54mm. When typesetting, it should be larger, 93×57mm, so that it is easy to cut. Then arrange the individual business cards. One A4 can arrange 10 business cards. This process is more difficult to fool a novice. The same goes for the opposite.
Second, commonly used typesetting software includes vector CDR, AI, and PS.
Question 5: After downloading the psd template, how do you use it to make a business card? Open it in PS and edit the corresponding text layer.
Question 6: How to make a business card in Excel. It is as easy as it is simple. , familiarize yourself with the software first, don’t mention anything about the software!
Question 7: How to make business cards on your computer? Next, go to the Internet to download the "TuTu" business card making software, and search for "TuTu" on Baidu Then download and install;
After the installation is completed, open the "TuTu" main page, and you will see many business card templates;
We select "Business Card Template", and here we choose a suitable one Your own template;
Double-click to open the template, then edit it to modify the company name, address and other information. Click on the text on the business card and make corresponding edits on the left; you can also add content according to your own needs; modify all information in the same way;
Modify the LOGO, click Local Upload, find the location where you saved the LOGO and open it ;
The production is completed. If you do not have an account, you need to register now before you can "Save" - ??"Export";
You can now save and export the business card;
Open Export the file and see the final effect; you can go to print;
Question 8: How to change the business card template in PS 1. Before designing the business card, you must first understand the relevant knowledge of the business card, such as specifications, size, and bleed size. , pixel size, etc. The standard size of general business cards is: 90mmX54mm90mmX50mm90mmX45mm. The pixels are generally above 350PI, plus the bleed size, so the document size we set during design must be: 94mm
Open Photoshop, create a new document, set the dimensions to width 94MM, height 58MM, resolution 400, color mode CMYK, and click OK. As shown in Figure 1.
2. Display the ruler (View D ruler) in the new document, then drag the auxiliary line to mark the bleeding with the auxiliary line. In this way, you will have a clear design range when designing. As shown in Figure 2. Sometimes for the accuracy of the auxiliary lines, you can enlarge the image and drag the auxiliary lines, which will be much more accurate.
3. At this point, the size of the business card is basically displayed. The next step is to add elements to the document
Through your own conception and imagination, plus referring to other people’s business cards ,As shown in Figure 3, pull out the auxiliary line as shown in the figure.
4. Set the foreground color to gray (C6c7bc), as shown in Figure 4.
5. Set the size of the pencil stroke to 5. Then use the pen tool to draw the path as shown in Figure 5 (5-1), then right-click the pen tool and select "Stroke Path". In the pop-up dialog box, select "Pencil" as shown in Figure (5-2), and then click OK. The effect after tracing the path is as shown in Figure (5-3).
6. In order to make the composition clear, remove the auxiliary lines just pulled out (except the bleeding lines).
Then drag out the auxiliary item as shown in Figure 6, use the Polygonal Lasso tool to outline the range as shown in Figure 6, and then fill it with red. The effect is as shown in Figure 6.
7. Similarly, use auxiliary lines and the Polygonal Lasso tool to get the shape as shown in Figure 7.
8. Put your company’s LOGO in the position shown in Figure 8. The effect is as shown in the figure.
9. Then put your company name in the position shown in Figure 9, with the font size as shown in the picture, or flexibly set the font size, color, character spacing, and English name font according to the length of your company name. Size etc.
10. Then add the name, position and contact information respectively in the positions shown in Figure 10. Here, the font size is not fixed and can be adjusted according to your own situation, such as font size 6 , line spacing 8 and so on.
11. At this point, the front template of the business card has been designed.
Question 9: How to use Meitu Xiuxiu to make business cards? Steps to use Meitu Xiuxiu to make business cards:
Find two beautiful pictures on the Internet that you want to use as background images. A business card is required, both front and back.
Right-click the image and save it as. Save the image to a folder you can find and wait for later use in editing.
Open Meitu Xiuxiu and click Beautify Picture in the options that appear to transform the selected picture.
After selecting the picture, click the option to find the text item, click on the upper left corner to enter text, which is used to add various contact information such as name and phone number.
Business cards need both front and back sides. After making the front side, you can continue to repeat the above operations to select the required pictures on the back and design the content on the back.
Question 10: How to make a personal business card using Word on a computer.
The specific steps are as follows:
1. Open "Word", click "File" in the upper left corner, and then click "New".
2. A new window will pop up on the right, click "Template on this computer", then select "Other Documents", and then double-click "Business Card Wizard".
3. Next create a new document, click the menu "Insert → Object", the "Object" dialog box will pop up, and select the "Microsoft Word Picture" type. Then click "File → Page Setup", in the pop-up "Page Setup" dialog box, set the "Paper Size" item in the "Paper Size" tab to "Custom Size", and then enter the paper size as the width "8.8cm" , Height "5.5cm" (5cm is also acceptable). In the "Preview" section on the right, you can see that the layout of a single business card has come out (as shown in Figure 1).
Figure 1 Define business card size
Click to switch to the "Margins" tab setting interface, set the top, bottom, left and right margins, and gutter to numbers" 0". After clicking the "OK" button to return to the Word editing state, design the content and style of the business card as needed and click the "File → Close (c) Document" menu item.
4. Letter and label settings
Create a new document, click the "File → Page Setup" menu item, and set the "Paper Size" tab in the pop-up dialog box. The "Paper Size" item is "Custom Size", where the "width" is 19.5cm; the height is 29.7cm. Then click the "Tools → Letters and Labels" menu item in sequence, and click the "Options" button in the "Label" tab in the pop-up dialog box (as shown in Figure 2).
Figure 2 Letter and label settings How to design a business card?
Business cards are like personal ID cards. They are designed to accurately and effectively express your information and make it easy for you to remember. Simple, accurate, effective and expressive.
1. Carefully choose the material of the business card
2. Combine the content of your company’s business and carefully design relevant elements
3. Design a unique style, you can use vertical style, which is eye-catching, or heart-shaped.
4. You can use translucent plates to be eye-catching.
5. The rest is about the company and personal basic information. The layout can be adjusted according to the selected style, plus photos, QR codes, etc.
First of all, the design is divided into many According to the broad categories, it can be divided into graphic design, web design, environmental design, architectural design, industrial design, fashion design, animation design, etc.! Each category can also be divided into many categories.
Business card design is classified under graphic design! So how to design a suitable business card? First of all, you should know the relevant hard-core knowledge of graphic design. In fact, graphic design is the foundation of all design, and format and fonts are the foundation of the foundation. In business card design, the knowledge of formatting methods and font typesetting is mainly used.
1. Concept and Classification
To put it simply, a business card is a small card used for visiting and socializing, with personal information printed on it, including name, position, address, phone number, and email address. , units (freelancers can ignore it), and then use it as a way to promote themselves (forgive me for using such ungentleman words).
Common types of business cards include business cards, creative business cards, and personal business cards. However, in most work and daily design situations, business cards are mostly seen.
Personalized and creative business cards are mostly used to display images in some fixed places. Generally, special attention is paid to the printing process and the selection of paper is also relatively high, so the price will naturally increase! Therefore, it is very important to design business cards according to the purpose and occasion. It is necessary!
2. Common business card design specifications
Design size:
The domestic standard model is 90mmx54mm
The American standard model is 90mmx50mm
The European standard model is 85mmx54mm (everyone has a common bank card, just take it out and see its size)
So domestic standards are generally used for design. Resolution 300dpi
Color mode: CMYK (not RGB)
Bleed line: The general bleed line for printing is 3mm, and business cards can be 2mm. After all, it is small, but remember not to do it without it. When the production master cuts off the work, it’s time for the designer to cry
3. Design
Is there any designer who is often asked or asks himself what is a good design? In my humble opinion, as long as the design is to solve the problem, it is design (haha, does that mean it is not mentioned). So what problem does the business card solve? As I said at the beginning, it is to promote yourself, so information dissemination is very important. So in a business card, even if the font size of the information is too large to fit in the layout, it is fine, but the design cannot be beautiful and the information cannot be seen. That's a useless business card. Therefore, when designing, you should pay attention to the issues of layout ratio and font selection
1. Regarding the issue of layout ratio, you must actually understand that less content and lower layout ratio can make the design appear calm and high-end. If the content is large and has a high layout rate, it will appear enthusiastic and cheap. Some customers or Party A are eager to take advantage of every opportunity. This is a wrong concept, just display useful information reasonably.
2. The selection and use of fonts is very important. This choice is related to the layering and breathing of the design. Do not use pure black, just give 90% black when printing. Don't use multi-purpose fonts, just do the last two. I can’t tell you how to choose a font. In short, designers must understand that fonts also have gender and personality. Generally, calligraphy is classical, free and elegant, but not suitable for modern style business cards. Generally, it looks like some thin fonts, which look clean and high-end, so look for them in various bold fonts
3. The layout content is detailed
When it comes to detail, it means various alignments Got it. Only strict alignment can guide users to read smoothly.
In the past, it was just my humble opinion.
How to design a good business card This article explains in detail the key elements of business card design from the components of a business card, the procedures for designing a business card, to the pictures, proportions, colors, etc. of the business card design. Although it is said to be a tutorial, I think it is more of a theoretical discussion!
Generally speaking, it is very helpful for friends who are just starting to design business cards. It allows everyone to see the business card design clearly and let everyone know how to start. Where to start!
(1) Basic requirements for business card design. As an independent media for a person and a profession, business cards must pay attention to their artistry in design. But it is obviously different from works of art. It does not have high aesthetic value like other works of art and can be appreciated and pondered. In most cases, it does not arouse people's concentration and pursuit, but facilitates memory and has stronger recognition, allowing people to obtain the required information in the shortest time. Therefore, the business card design must be concise and concise, the fonts must be hierarchical, the design awareness must be emphasized, and the artistic style must be novel.
The basic requirements for business card design should emphasize three words: simplicity, power and ease.
1. Simplicity: The main information conveyed by the business card should be concise and clear, and the composition should be complete and clear.
2. Gong: Pay attention to quality and efficacy, and make the message conveyed as clear as possible.
3. Easy: easy to remember and easy to identify.
(2) Business card design procedures
1. Before designing a business card, first understand three aspects of the business card holder
(1) Understand the identity of the business card holder Identity, occupation.
(2) Understand the business card holder’s organization and its nature and functions.
(3) Understand the business card holder and the business scope of the unit.
2. Unique concept
The unique concept comes from the reasonable positioning of the design and the comprehensive understanding of the business card holder and the organization. A good business card idea can withstand the assessment of the following aspects:
(1) Whether it has visual impact and recognizability.
(2) Whether it has the working nature and identity of a media subject.
(3) Whether it is unique and unique.
(4) Whether it is consistent with the business characteristics of the holder.
3. Design positioning
Determine the design concept of the business card based on the understanding of the first three aspects, determine the composition, determine the font, determine the color, etc. (3) Components in business card design
In business card design, components are indispensable. The so-called constituent elements refer to the various materials that make up a business card, generally referring to logos, patterns, copywriting (name of the business card holder, mailing address, communication method), etc. These materials each have different missions and functions, and are collectively referred to as constituent elements.
The constituent elements are divided into two categories:
1. The constituent elements belonging to the shape
(1) Logo (a trademark or registered trademark designed with a pattern or text shape) Corporate logo)
(2) Pattern (forming the unique color block composition of the business card)
(3) Outline (several borders)
2. Belonging to the plan Components
(1) Name and position of the business card holder.
(2) The company and address of the business card holder.
(3) Communication method.
(4)Business field.
The above components have their place in the design of business cards, and the focus of the design is determined according to each type of business card.
(4) Pattern of business card design
In the design of business cards, pattern design is an important link. The success of the pattern design directly affects the visual effect of the business card and affects people's psychological feelings towards the business card holder and the company where he works. Patterns have a fixed function in a business card.
1. The functions are classified as follows:
(1) Attract attention. A good business card pattern design not only meets the composition needs of the picture, but also strongly attracts attention. , thereby achieving the purpose of self-promotion by the holder.
(2) Convey the professional characteristics and industry characteristics of the business card holder. The form and color of the business card pattern should reflect the professional characteristics and industry characteristics of the business card holder.
(3) The inducing effect of guiding readers’ attention to important plans.
2. The composition of the pattern
(1) Gradient of the pattern
Using monochrome gradient in business card design can maintain the integrity of the design. Without losing the visual impact.
Mixed color gradients are more than one or two color gradients. The effect of this picture is more active, but when applying, attention should be paid to the contrast of colors and the proportion distribution of the composition.
Image gradient takes the logo, factory name or distributed product of the business card, and makes light color weakening, color gradient and size gradient on it to form a richer visual effect.
(2) "Contrast and unity" of patterns
The role of patterns in business cards is to highlight the theme, enrich the picture, and remind readers. Therefore, the design of the pattern must pay attention to contrast and complete unity. Contrast mainly refers to the obvious difference between the pattern of the picture and the ground of the picture. Unification means that the layers of the painting should be clear, and the existence of the pattern should make the theme prominent, the composition eye-catching, and full of personality, while not overwhelming the guest.
(3) The expression techniques of the pattern are based on the personality characteristics of the business card, giving the pattern different expression techniques. The expression techniques are as follows:
Image texture method This method is to use the image related to the business card holder's industry for texture processing to form a pattern with a distinctive personality.
The image photography method takes image photography pictures related to the business card holder's industry and performs various artistic treatments to form concrete art patterns.
The painting texture method expresses abstract patterns, mainly expressing the texture effects of various paintings, giving the business card a strong artistic personality. Such as: oil painting texture method, scraper texture method, sketch texture method, sketch texture method, watercolor texture method, traditional Chinese painting texture method, etc. (5) Proportions of business card design
Although the business card is small, it is a complete picture, so there are problems with the proportion and balance of the picture. This includes two aspects: one is the overall content of the business card, including the proportional relationship of the plan, logo, and color blocks; the second is the proportional relationship of the border lines. Here are several ratios for reference:
1. Golden ratio (golden section)
The golden ratio is a ratio that is widely used in design. The ratio of the width to length of a rectangle is 1:1.618. Postcards, paper cards, stamps, and flags of some countries that are common in daily life all use this ratio. The golden ratio was compiled by the French architect Corbusier based on the proportions and mathematical principles of the human body structure. A man named Grips in the United States used five rectangles with different proportions to conduct public opinion polls among the public. The result was that the golden ratio rectangle was the one with the highest recognition.
Business card design
Never underestimate the role of a business card, it is a trace of memory left behind after you leave. Important details that directly affect personal development.
Let me summarize the ideas for business card design.
1. Starting point
The so-called starting point is the first feeling you want to give people_what? For example: the honest paper should be thick and textured, if you are in the glass business You can make business cards transparent, etc.
2. Concept
The traditional Chinese sky is round and the square is round, so we can make business cards with rounded corners.
3. Functionality
The main reason why many business cards are thrown away casually is that they are useless. Based on this idea, we can design business cards into bookmarks, message notes, etc.
4._Add its artistic quality.
Everyone is always willing to keep beautiful things for a while.
5. Transmission of text information
The text should be concise and not too much. In today’s fast pace, complicated designs are not recommended.
Usually the traditional business card size is 90mm*54mm
Now let’s talk about how to design a good business card. Regarding the font, I will put it in the picture, remember to look oh.
1. Layout ratio
It is the ratio of screen elements to the total screen area;
A simple design can really help. On the contrary, a complex pattern will make the business card look not classy enough. In layman’s terms, it means there is no strong style and a lot of negative space, but it doesn’t have to be white. A simple type can last for a long time. Usually, a low layout ratio means less text and more white space, which will naturally reflect calmness and high-end. To put it another way, a high layout ratio means that the text takes up most of the part. Although it looks enthusiastic and proactive, it will give people a sense of enthusiasm and initiative. It feels cheap, which is something to be aware of.
2. Font selection
The use of fonts largely determines the first impression of this business card;
The font of the business card The size is generally 4-12 pounds and should not be too large. Things like addresses, phone numbers, etc. can be controlled at 6-8 pounds. Company names, titles, etc., can be 10-12 pounds;
Don’t choose too many fonts. It’s best to limit it to two fonts for a business card, otherwise it will give people a messy feeling;
Secondly, the color, brightness, and type of fonts should not be too many. Try to control them as much as possible. Within two types;
As for the choice of font, I will put it in the picture.
The next thing is the most important, be sure to remember it!
3. Rigorous alignment
In such a small picture as a business card, only rigorous alignment Alignment can guide users to read smoothly;
After designing a business card, be sure to carefully check whether the text in each part is aligned, left-aligned, center-aligned, horizontally aligned, vertically aligned, just Even the gaps above and below the text must be aligned. Only a clean picture will appear high-end.
4. Use colors and images
A clever combination of colors will make people’s eyes brighter;
Colors and patterns are important in any design scheme Components play an equally important role in business card design. Double-sided printing can display images well. By using a pop of bright color or a photo, your card will stand out among a bunch of taupe and black cards;
Remember what I said above about not having too much color on your business card. Multiple colors appear, up to three colors.
The following are recommended several commonly used business card color combinations;
Black and white, blue and black 80%, deep sea blue and white, dark green gold, leaf green white, leaf green black 15%
There are just so many examples, it depends on how you learn.
Suggestion: read more, practice more, do more, don’t be too conceited and belittle. If you see any good design, you can try to make it yourself, which will gain you a lot of experience.
That’s it for business cards. If you don’t understand anything, you can ask questions. Whether it’s a business card or something else, after the design is completed, be sure to check carefully to see if there are any typos, alignment, and color matching. What a problem.
Come on, I wish you a satisfactory design~
Made according to the customer's needs, generally there are specific size restrictions, it is best to be convenient for the owner