Current location - Quotes Website - Personality signature - What if there is a blue screen in win7?
What if there is a blue screen in win7?
The problematic interface is like this.

The steps are as follows:

1. Press Enter directly.

2. The following interface appears.

When prompted, press F8.

3. Enter the following interface

Then select "Force without driver's signature" and press Enter.

Finally, you can successfully enter the Windows system.

It is recommended that you try to run the computer in safe mode to see if you can get into the system:

To restart the computer, generally, before Windows starts running, press the F8 button, and the advanced options menu will pop up. After entering safe mode, see if the problem still exists.

If safe mode still can't enter the system, it may be that your Win7 system itself has been damaged or caused by hardware problems.

According to the prompt information, there should be a problem with the boot information of Windows 7, which leads to the inability to enter the system.

Follow the above steps, use the CD to boot into the repair computer, select the system to be repaired, and click Next.

Then click the command prompt to enter the command line and enter bcdedit.

In the list that appears, find the device project and the osdevice project, and confirm their parameters. If the latter parameter is unknown, it means that the installation partition of the system is not specified and the system cannot boot normally.

Please follow the steps below, enter each instruction, and then click Enter to make the settings take effect in order to try to repair the startup information.

C: \ bcdedit/store c: \ boot \ BCD/set {bootmgr} device partition =c:

C: \ bcdedit/store c: \ boot \ BCD/set {default} device partition =c:

c:\ bcdedit/store c:\ boot \ BCD/set { default } OS device partition = c:

After completing the above operations, restart the computer to confirm whether you can enter the system.

1, many computer failures can be solved by reinstalling the system, but if there are some important software or documents, you can try this method first: press F8 and other shortcut keys to enter the advanced startup option after booting, and select "Last Correct Configuration";

2. If it can't be restored, select "Safe Mode" in the advanced startup option, then uninstall some recently installed drivers or software, and restart before entering the normal mode;

3. If it still can't be solved, you can enter the PE system through the USB flash drive and use "Windows Boot Repair" to solve this problem;

4. Otherwise, the computer system needs to be reinstalled. For detailed steps, please refer to: detailed graphics and text of computer U disk reloading system tutorial.

Win7 system has been unable to enter the system after self-checking, and it can't be solved by restarting. It doesn't matter. Today, Bian Xiao, the home of the system, introduces three methods to solve the problem that WIn7 system can't boot.

Last Known Good Configuration

1. We can guide F8 into the advanced options menu of the system, and choose the final correct configuration to try. After recovery, it will be the configuration before our last shutdown.

safe mode

2. If we still can't enter the system, we still F8 enter the advanced options menu of the system and choose to enter the safe mode. At this point, the system will automatically repair the damaged registry in safe mode. If there is something wrong with the registry, you can restart it after entering safe mode.

3. Find an original mirror installation disk of Win7 system, which can be a CD or a USB flash drive, plug in the computer, and the system will automatically enter the installation interface and choose to repair the computer. If the repair is unsuccessful, we can try to restore the system image, provided that our previous system has a backup.