Question 1: How should the binding line of project archives be worn? I hope there is a picture. Fold the rope in half first

Pass the folded part through the middle hole, pass the other two ends through the other two holes respectively, turn it over, pass the two ends through the folded part, and tie a slipknot

Question 2: How are the binding threads of ancient books threaded? Most ancient books use thread binding (binding). The process is to punch holes first, then thread (cotton) threads, then thread them, tie them tightly, and finally paste the knots. Nowadays in many cities, All digital printing companies can provide imitation (antique) thread binding services. You may gain something by checking them out.

Question 3: How are the binding threads of ancient books threaded? 10 points Ancient books are all thread-bound. The holes are punched first and then threaded.

Question 4: How to bundle the financial binding line seems to be troublesome, but it is still very convenient in practice:

Before ordering, you need to design it and look at it for a month How many volumes should the accounting vouchers be made into? The thickness of each volume should be basically the same. Several original vouchers that should be attached to one accounting voucher should not be separated and bound into two volumes. It should be both beautiful and easy to read.

The thickness of a voucher is generally 1.5 to 2.0 centimeters. If it is too thin, it will not be convenient for standing and placing; if it is too thick, it will not be convenient for reading and checking. Each volume bound by the voucher is usually in units of months, and is bound into one volume or several volumes every month. Units with few vouchers can combine vouchers for several months into one volume, and indicate the voucher months included in this volume on the cover.

Since the original voucher is often larger than the accounting voucher, it is folded too much, so that the voucher appears thick in the middle and the binding line is thin, making the voucher look like a fish. At this time, you can use some paper to fold into many triangular shapes and place them evenly on the binding line. Such bound vouchers will look neat.

Before binding, take the upper left side of the accounting voucher as the standard and put it in order. Prepare an iron awl, a binding machine or a small electric drill, as well as wire rope, iron clips, glue, voucher cover, and corner wrapping paper.

Here is a corner binding method:

(1) Cut the cover and back cover of the voucher, attach them to the front and back of the voucher respectively, and then take a piece of paper with the same texture ( You can find another voucher cover, cut out half of it for use, and use the other half for booking a voucher.) Place it on the upper corner of the cover to make a corner protector.

(2) Draw an isosceles triangle with a side length of 5 cm on the upper left corner of the voucher, clamp it with a clip, and use a binding machine to punch two holes evenly distributed on the bottom line.

(3) Use a large needle to thread the thread through the two eyes. If there is no needle, you can straighten the paper clip, then fold both ends to the same direction, and clip the thread while folding. If it is tight, you can lead the thread through, because the holes made by the binding machine can be passed through.

(4) Tie a knot on the back of the voucher. It is best to tie the cord at both ends of the voucher.

(5) Fold the corner protector to the upper left side, cut one side to the upper left corner of the voucher, and then apply glue.

(6) Fold upward and glue the cord buckles on the sides and back. See the picture below for the above.

(7) After drying, write on the side spine of the voucher book the words "Which volume and which volume in a certain year and month". The binder signs or seals the binding line seal. It is best to number cash vouchers, bank vouchers and transfer vouchers in sequence, and number them from scratch once a month. If the unit has few vouchers, they can be numbered sequentially throughout the year.

At present, some bookkeeping stores have a kind of subpoena box. The bound vouchers are put into the box and stacked for safekeeping, which looks neat. Those who are new to accounting work may not be very familiar with some operations in actual accounting work. I would like to introduce to you

the binding method of accounting vouchers:

1. In terms of direction, There is the left binding line binding method; there is the upper left corner binding method. The binding method at the left binding line is more common and intuitive to use and will not be introduced here.

I will only introduce the specific method of corner binding in the upper left corner: use two paper strips of appropriate width and length, fold them vertically and place them in the upper left corner of the cover, and bind them together with the voucher.

After kissing, fold it back along the binding line and cut off the excess part at the end. After folding, the seal will appear as a triangle in the upper left corner of the voucher cover and the back cover of the voucher will appear as a rectangle. The binding line can be completely covered. Finally, stick it with glue. And stamp the binder's name seal on the riding seam and press the seam.

2. In terms of binding methods, we introduce a clamping method, which is to clamp the binding at the left side so that the thickness is the same as that on the right side. This method is suitable for situations where there is a lot of business and thick vouchers. When stuffing, you can use accounting vouchers to cut into sections, or fold paper to make stuffing. In actual work, you can cut the sandwich core of used express mail according to the size and appropriate width of the voucher to make stuffing, which is convenient and very economical.

There are other ways to deal with the balance between the left and right sides: the original vouchers attached to each accounting voucher should be as few as possible or the original vouchers should be used as accounting vouchers; in this way, the number of accounting vouchers should be close to The number of original vouchers is less likely to be warped on the right side.

(2) Notes: The account summary table and T-shaped account table should be bound in, so that you can quickly find a certain voucher without looking at the account book. Although computerization is now available, the account summary table should still be stapled. At least you can know the amount of the current month without looking at the ledger.

(3) Recommend a folding method of original vouchers. When the original voucher is larger than the accounting voucher, most of our methods are to fold the left corner first and then fold it inwards. After folding in this way, the folded corner is at the bottom. When reading

you need to open the folded part first, and then open the left corner of the fold. ......>>

Question 5: How to display the word gutter. The gutter set under File-->Page Settings cannot be displayed automatically, but the page footer can be used to realize the gutter. , just use vertical headers

Question 6: Case file binding method 20 points Case file binding mostly uses the three-hole double-line method. The specific steps are as follows:

On the left side of the file Punch three holes at appropriate locations, as shown in the picture:

Cut a binding wire of appropriate length, fold it into two strands, and pass it through from the front to the back of the file to form a live opening, as shown in the picture Show:

Pass both ends of the double wire through the two holes on the front of the file to form a W shape, as shown in the picture:

4. Turn the file over so that the wires at both ends cross. Insert it into the slipknot in the middle hole and tighten it to tie it.

Question 7: How are the binding threads of ancient books threaded? Most ancient books use thread binding (binding)

The process is to punch holes first, then thread (cotton) thread, and then thread and tie them Tie the knot tightly and finally paste the knot

Nowadays, digital printing companies in many cities can provide imitation (antique) decoration services, which are basically the same as the ancient method

I don’t know how to do the picture Go up`

Question 8: How to put the gutter on the left side in word? File>Page Settings>Margins>Gutter Set Width, Select the left (side) position to set the line, use text Frame, remove the border, add text (----binding-----binding-----line), then typeset it yourself, and it's OK

Question 9: How to tie the binding line? I ordered two holes, but I don’t know how to thread the thread or tie it. 5 points: Very easy. Punch another hole. If there are only two, tie them directly and tie the knot tightly.

Question 10: How to thread three-hole vouchers and how to bind accounting vouchers using the three-hole method. Binding accounting vouchers using the three-hole method:

1. Start with the first hole at the top, and then Thread the thread from the front to the back, stretch it slightly and wrap it from the top of the voucher to the front, then thread from the first hole to the back, leaving a 5cm length for spare. 2. Use the other end of the binding wire to punch the second hole from the front to the back, and then punch the third hole from the back to the front. 3. Wind the binding wire from the bottom to the back of the voucher, pass through the third hole to the front, and then pass the second hole from the front to the back, then tighten the 5cm line left in the first hole and tie it tightly.