Hello

.

Stop:0x000000FC (equivalent to the new blue screen representation code BCCode: fc)

Microsoft explanation: In use This issue occurs when you create a system image on a computer with an Intel processor and then deploy the image to a computer that does not use an Intel processor.

For example, you cannot Create a system image and then deploy the image to a computer with an AMD processor.

If this problem inevitably occurs after a period of inactivity, it is recommended that in the Power Options of the Control Panel. All options related to sleep, etc. are set to Never

Then in the Device Manager, right-click the network adapter and click Properties, and in the Power Management tab, uncheck "Allow the computer to turn off this device to save money." Check the box in front of "Power".

It is possible that the computer has not been used for a long time, causing the computer to enter sleep state, and our motherboard does not support the sleep function well, resulting in a blue screen.

It is recommended that you perform a full virus scan first, and then check the problem. In addition, it is recommended that you download the driver from the official website and check the compatibility of the hardware driver and the system.

If it still cannot be solved, It is recommended to use sfc to repair:

1. Click the start menu, enter "cmd" in the search, find and right-click to run "cmd.exe" as an administrator.

2. Enter "sfc /scannow" in the command prompt and press Enter.

Conclusion: If you are installing the GHOST version of WIn8, it is recommended to download the original Win8 and reinstall the operating system.

From the error message you provided, it appears that the system has been restarted and illegally shut down multiple times, which may cause hard disk errors or bad sectors.

It is recommended that the following methods be used to detect and repair the hard disk. Errors and bad sectors:

1. Use DiskGenius> to detect and repair hard disk bad sectors. (If you can no longer enter the system through normal startup, please go to safe mode or CD-ROM or U disk to boot the computer into WinPE and repair it .)

2. Or, use the system’s built-in disk error correction function to repair hard disk errors: (Note: If you repair the system partition, it will not be repaired until the computer is restarted or turned on next time. )

Open "Computer" (My Computer) on the desktop. Right-click the drive you want to check, and then click "Properties"

Click the "Tools" tab. Then under Error Checking, click Check Now. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.

To automatically fix the errors detected by the scan. If you encounter problems with files and folders, select "Automatically fix file system errors." Otherwise, Disk Check will report the problem but not fix it.

To perform a thorough check, select "Scan and try to recover bad sectors." This scan will attempt to find and repair physical errors on the drive itself and may take a long time to complete.

To check for both file and physical errors, select Automatically fix file system errors and Scan for and attempt to recover bad sectors. (It is recommended to use this option to repair serious disk errors)

.

★Important note: Repairing bad tracks on the hard disk will destroy the data on the bad tracks and adjacent sectors. Please back up your data before repairing bad sectors on your hard disk to reduce unnecessary data loss! ! !

When troubleshooting viruses and hardware failures, it is usually because the GHOST version or other modified version of the operating system is installed, because a large number of drivers that are not suitable for your hardware device have been integrated in advance. As a result, the system cannot correctly identify and load the necessary hardware devices for the system.

.

Re-download and install the original image installation version of the operating system and install all drivers with Microsoft WHQL certification The driver can correct such errors.

Appendix---Microsoft's instructions on driver blue screen: The driver is not digitally signed, which means that the driver has not passed Microsoft's Windows Hardware Quality Laboratory (WHQL) )test. Installing drivers without digital signatures can cause instability in the operating system and even cause a blue screen of death. You can obtain WHQL-signed drivers from the manufacturer of your hardware device. A note from Microsoft about drivers: A driver is a piece of software that allows your computer to communicate with hardware or devices. Without the correct drivers, the hardware or device you want to use will not work properly.

Wish you all the best, and hope you can adopt it in time if it helps.