2020 Safety Accident Responsibility Commitment Letter Sample (Selected 5 Articles)

In our ordinary daily life, we are all directly or indirectly related to the commitment letter. The commitment letter is determined by the title It consists of six parts: introduction, main text, conclusion, signature and date. Come and refer to the commitment letter you need! The following are 2020 Safety Accident Responsibility Commitment Letter examples (selected 5 articles) that I have collected for everyone. They are for reference only. You are welcome to read them.

2020 Safety Accident Responsibility Commitment Letter 1

Party A:

Party B:

In order to conscientiously implement “safety first, prevention first” The policy of "mainly" and the construction principle of "safety first, quality second, progress third" ensure the safety of construction and production of the second line of Xiangyu, take good safety protection measures, implement safe production in practice, and ensure that efficiency must be emphasized Safety, we must pay attention to safety in construction. If a safety accident occurs, we will bear corresponding economic losses and criminal liability. Both parties specially signed a responsibility letter for safety production in the construction of this project.

1. Party B’s work responsibilities and scope

Party B shall perform its work responsibilities and be responsible for the construction organization and management of the project.

2. Party B’s responsibility for production safety

1. Conscientiously implement the regulations of superiors on production safety, and bear direct leadership responsibility for the safety of the teams under their jurisdiction (especially external labor teams).

2. Carefully supervise the implementation of safety technical measures and safety operating procedures. Based on the characteristics of production tasks, make written safety technical briefings to the team (including external labor construction teams), perform signature procedures, and review the procedures, measures, and Check the implementation of disclosure requirements and correct illegal operations at any time.

3. Responsible for organizing and implementing the three-level safety education, regular safety education, seasonal changes and various forms of safety education based on the characteristics of each stage of construction for the construction teams under their jurisdiction, and responsible for organizing and implementing the construction teams under their jurisdiction Safety training for special operations personnel of the team and management of work with certificates.

4. Frequently inspect the safety conditions of the working environment, equipment and safety protection facilities of the teams under your jurisdiction (including external labor construction teams), and promptly correct and resolve any problems found. For construction in special parts, it is necessary to check whether the technical conditions of workers and various equipment and safety protection facilities meet the requirements of safety standards, carefully prepare written safety technical explanations, implement safety technical measures, and supervise their implementation to ensure that no violations of regulations are given.

5. Responsible for organizing and implementing the teams under your jurisdiction (including external labor construction teams) to carry out various safety activities, learn safe operating procedures, accept safety supervision and inspections from safety management agencies or personnel, and promptly resolve any unsatisfactory questions raised by them. Security Question.

6. Strictly implement the declaration and approval system for new materials, new processes, and new technologies used in engineering projects. If unsafe problems are found, stop construction in a timely manner and report to leaders or relevant departments.

7. In the event of work-related casualties or near-misses, construction must be stopped, the site protected, and reported immediately. For major casualties and major near-misses, the cause of the accident must be identified, corrective measures must be implemented, and reported to the relevant departments. Construction can be resumed only after passing the acceptance inspection. It is not allowed to dismantle on-site protection facilities without authorization and forcefully resume work.

This Letter of Responsibility is made in duplicate, one copy each for Party A and Party B, and they are equally valid. It will take effect once signed by both parties A and B.

(If there is an attachment to this Letter of Responsibility, signature by both parties shall be deemed to agree and accept the content and requirements of the attachment, and shall be regarded as an integral part of the Letter of Responsibility)

Party A Signature: ____________ Party B’s signature: __________

Date: ______ month _____, 20_______ Year: ______ month _____ day, 20_______ Year 2020 Safety Accident Responsibility Commitment Letter 2

Construction unit:

Construction unit:

In order to strengthen the safety production management of the construction site and strengthen safety awareness, in accordance with the relevant national safety laws, regulations, standards and regulations and sign a construction safety responsibility letter for this project. The construction unit is required to consciously abide by and perform the relevant terms in the responsibility letter. The construction unit shall bear full responsibility for any violation of the terms in the responsibility letter and causing safety accidents. The specific content is now clarified as follows:

1. Safety Management

1. Before entering the site, the construction unit should carefully review the construction organization design submitted to the construction unit and supervision unit for review. Compile construction safety measures, which must be targeted and operable.

2. To establish and improve the safety production responsibility system, a construction site safety production and fire prevention leadership group must be established. The team leader is the project manager, and the team members are composed of the construction team leader, safety officer, construction team leader, subcontracting project manager, etc.

3. Strengthen production safety education for all construction personnel. Regularly organize construction workers to learn safety production management regulations, improve their ideological understanding, and always establish safety production awareness. Provide pre-job training for workers and induction training for new workers. Ensure that each worker clearly understands the safety technology and operating specifications for his or her position.

4. The project manager is the person directly responsible for the construction site and is directly responsible for the safety production at the construction site.

5. Establish a production safety reporting system. The construction team must establish a safety production reporting system for start-up work, and specifically implement the project start-up safety production report, sub-project start-up safety production report, electricity safety production report, fire safety production report, monthly safety production report, etc.

6. Safety warning signs and safety warning banners must be made at the construction site; the roads on the site must be smooth; large components must be stacked neatly. The construction site must be equipped with adequate safety fire-fighting equipment in accordance with regulations.

2. Safety protection

1. "Four entrances" protection must be achieved: temporary barriers must be used at stairwells, elevator entrances, reserved openings, and passageways of projects under construction Or cover, etc. for protection.

2. "Five adjacent edges" protection: 1-meter-high double railings and safety nets must be installed on the balcony edges, floor edges, floor edges, both sides of the runway, and the outer edges of the unloading platform where external scaffolding has not yet been erected. .

3. Safety passage: Construction workers and other personnel should set up special safety passages during the construction process or at the entrance and exit of commuting.

4. High-altitude operations: For relevant high-altitude operations, reliable internal and external scaffolding, protective nets, etc. must be designed and erected with reference to the "Technical Specifications for Safety of Operations at Height in Construction", and feasible safety production plans must be formulated. Protective measures to ensure work safety.

5. Prevent mechanical injuries: Construction machinery should be operated in strict accordance with construction specifications, equipped with safety devices, strengthen mechanical care and maintenance, ensure normal operation of machinery, and conduct regular safety inspections of key transportation machinery. Relevant personnel must hold valid certificates to work, and operations must be recorded.

6. Safety helmets must be worn when entering the site.

3. Safe use of electricity

The electricity used for on-site construction should be arranged and arranged in accordance with the requirements of the "Technical Specifications for Safety of Temporary Electricity Use at Construction Sites".

1. Power distribution room: The power distribution room must be designed and installed in accordance with the regulations for temporary power use. At the same time, it must be handled by trained and qualified professional electricians, and a responsibility system must be implemented to ensure daily maintenance and use.

2. On-site power facilities: The distribution box should meet the requirements of "three-level power distribution and two-level protection", and the wire laying should be installed according to the requirements of "three-phase five-wire system".

3. Mechanical electricity consumption: Mechanical electricity consumption should comply with the regulations of “one machine, one gate, one leakage, and one box”, and a dedicated person should be responsible for it.

4. On-site construction lighting: There should be sufficient lighting for night operations. For construction in special environments such as humidity, safe low-voltage lighting should be used, and the dedicated lighting circuit should be equipped with leakage protection.

IV. Fire protection

1. Strictly control hot work: In order to prevent open fire work from causing fires, fire reports should be implemented and open fire work should be strictly controlled.

2. Fire prevention in the carpentry room: The carpentry room is a key area for fire prevention. Debris should be cleared away in time, fireworks are strictly prohibited, eye-catching warnings should be made, and fire-fighting equipment should be equipped.

3. Fire prevention in material warehouses and reference rooms: Develop a fire prevention system, assign responsibilities to people, and provide sufficient fire protection equipment.

4. Fire prevention in dormitories and offices: It is strictly prohibited to use electricity or fire at will, and the person responsible for fire prevention must be identified.

5. Do not use electrical appliances for heating or cooking, and do not burn debris anywhere.

6. The canteen must be far away from mountains and trees.

5. Vertical transport machinery

1. Tower crane installation must have moment limiters and limiters, hooks and winches must have safety devices, and wire ropes require regular maintenance;

2. After the tower crane is installed, it must be strictly inspected and accepted, and it can be used only after inspection and approval by the safety supervision department

3. A dedicated person must be responsible for commanding the tower crane, and the commander and driver must hold a certificate On duty.

6. Employment Management

The construction unit must know the situation of the workers used, and shall not admit or use people whose identities are unknown or whose identity documents are incomplete. They shall not use or accommodate people with unclear or unclear histories. Persons who commit illegal and criminal acts.

7. All types of safety production accidents should be reported promptly in accordance with relevant regulations. Report all kinds of safety production accidents in a timely manner and assist in investigation and handling. The enterprise project department reports the handling opinions to the infrastructure department and strives to reduce losses to a minimum. If major safety or fire accidents occur at the construction site, the performance bond of the construction unit will be deducted, and key penalties will be imposed on the parties concerned in accordance with regulations; if a fire or local fire occurs, the construction unit will be fined 5,000-50,000 yuan, and the project manager will be fined 1,000-10,000 yuan. , the safety officer will be fined 500-5,000 yuan, and the person involved will be fined 10,000 yuan and be fired immediately.

8. This agreement will take effect from the date of signature. It must be signed and sealed by the project manager or legal representative of the construction unit and the project leader of the construction unit. Among them, there is one copy each for the construction unit and the construction unit, one copy is kept by the supervision unit, and one copy is reported to the school security office for record.

Construction unit: Construction unit:

Signature of Party A: ____________ Signature of Party B: __________

Date: ______month_____day, 20_______year : 2020 Safety Accident Responsibility Commitment Letter 3 on ______ month _____, 20_______

In order to ensure the safety of the construction of this project, this unit: Construction person in charge: Solemnly promise that we will carry out the construction work in accordance with the construction contract I assume responsibility for safety management within the scope of this construction. The basic contents of the commitment are as follows:

1. Commitment to strictly comply with company or market requirements and the "Construction Safety Inspection Standards" during the construction period

< p> (JGJ59-99) and the content of the market's "Construction License" and the company's "Decoration License", clarify safety responsibilities, do a good job in construction organization design and construction safety technology, and obey the daily management and inspection of the company or market-related departments .

2. Commitment to provide safety education to the construction personnel of the unit, have a sound safety management system and training and education records, and ensure that construction personnel do not violate market management regulations and national laws and regulations. Submit market and corporate regulation.

3. When applying for a construction license, submit copies of the unit's special operations personnel's ID cards and construction personnel's ID cards to the market for record, and apply for a "temporary construction access permit" in accordance with regulations. And accept company or market supervision and inspection, and enter and exit the construction site with credentials.

4. Commit to civilized construction and ensure that no fire safety accidents and work-related injuries occur on site. Set up an on-site safety person in charge to explain construction fire protection and safety work guarantees and the implementation of construction plans to the market and relevant departments to ensure that Construction personnel and companies, market and third-party personnel, and property safety. If any accident occurs or casualties occur due to construction, the construction party promises to be fully responsible and has nothing to do with the market or the company.

5. Construction personnel are committed to consciously abide by Party A’s market management regulations. If any unsafe acts occur that endanger personal or property safety, they must make immediate rectifications unconditionally and accept the instructions of Party A’s market and company functional departments. Inspect and supervise, and resolutely rectify the problems of "rectification notices for unqualified items" issued by the relevant departments of the market and the company.

6. When the company or market supervision personnel discover major unsafe factors, they have the right to require the construction party to stop work and make corrections at any time, and the construction party shall not continue to violate regulations and enforce construction.

7. We promise that if the market and third-party personnel or property safety are damaged due to improper construction or other problems, we will compensate in full according to the extent of the loss, and the company or the market will make a one-time compensation of 1,000 yuan to 10,000 yuan depending on the situation. The liquidated damages will be deducted. After negotiation, the construction party admits that the liquidated damages are 30% of the project price. If it is not enough to deduct and compensate, the construction party will pay separately or offset it from the project funds other than 30% of the project price. Withhold payment.

8. Commitment not to affect surrounding people, market operations, sanitation, and environmental safety during the construction period, be responsible for all adverse effects caused by the unit's construction workers, and abide by the company or market's "Shop and External Construction Management Regulations" Safety precautions such as electrical safety and fire safety.

9. Commitment to accept rectification of the "Notice of Rectification of Unqualified Items" issued by the market or relevant company departments during the construction period. Consciously sign the "Notice for Rectification of Non-Conforming Items" and accept the company or market's opinion of withholding liquidated damages of 50-500 yuan each time. For refusal to sign the Rectification Notice, Party A has the right to directly withhold double the amount according to the terms of the commitment letter. Liquidated damages of the construction unit.

10. This letter of commitment is an effective certification document for the market and the company's supervision of external construction safety. It is an attachment to the contract and has legal effect. If the committing party violates it, it will be dealt with according to the opinions in Article 9.

11. Safety issues include but are not limited to the above situations. If there are any unspecified matters, please refer to national laws and regulations and the terms of this commitment letter.

This letter of commitment is made in quadruplicate. (One copy is archived in the market, one copy is in the company’s engineering department, and one copy is posted on site by the construction unit. After construction is completed, the construction unit will hand this form to the market management office as a settlement voucher.)

Commitment to the construction unit (cover Chapter):

Party A’s signature: ____________ Party B’s signature: __________

Date: ______ month _____, 20_______ year Date: ______ month ____, 20_______ year _Japan 2020 Safety Accident Responsibility Commitment 4

1. Earnestly implement the safety production policy of “safety first, prevention first, all-hands-on-deck, comprehensive management”, and abide by various safety production systems and regulations, Do not harm yourself, do not harm others, and do not be harmed by others.

2. Be loyal to your duties, strictly fulfill the safety production responsibilities of your position, and implement the "one post, one system".

3. Do not give illegal instructions, do not work illegally, do not violate labor disciplines, resist illegal instructions, and correct violations.

4. Strictly implement the operating license management regulations. When using fire, importing equipment, temporarily using electricity, working at high altitudes, and breaking ground, the operating license must be obtained in accordance with regulations and procedures. Operations without a license are not allowed. .

5. Dress to work in accordance with regulations, wear labor protection equipment, do not bring fire into the production area, do not smoke in no-smoking places, and strictly abide by the "Ten X Orders" such as fire and explosion prevention, vehicle safety, etc.

6. Take the initiative to accept safety education, training and assessment, and be certified to work, be able to call the police, self-rescue and mutual rescue, and be proficient in the use of fire and gas protection facilities such as gas masks, respirators, and fire extinguishers.

7. Consciously accept the safety and technical operation requirements of the company, department, and team, consciously implement various safety, technical, and required safety measures, and do not take chances.

8. Take the initiative to stop unsafe behaviors of colleagues, and immediately report to the on-site production safety management personnel or relevant person-in-charge if any accident hazards or other unsafe factors are discovered.

Party A’s signature: ____________ Party B’s signature: __________

Date: ______ month _____, 20_______ year Date: ______ month _____ day, 20_______ year 2020 Safety Accident Responsibility Commitment Letter 5

According to the "Work Safety Law of the People's Republic of China", "Fire Protection Law of the People's Republic of China", and "Food Hygiene Law of the People's Republic of China" ", "Road Traffic Safety Law of the People's Republic of China" and other relevant national, provincial and municipal laws and regulations, as a contractor/supplier/outsourcer and other service providers (hereinafter referred to as the factory), In order to ensure that we provide the factory with a good occupational health and safety environment, our unit promises to abide by the following safety responsibility regulations:

1. Comply with the safety requirements of the current national safety-related laws and regulations.

2. Perfect internal safety measures:

(1) Our unit has established and improved safety and fire protection management systems to ensure safe and civilized construction on site. There have been no incidents within three years. Safety incidents have occurred.

(2) During the construction operations and provision of services to the factory, our unit complies with national safety standards and obtains corresponding quality, safety and other related qualifications.

(3) During the factory construction operations and provision of services, our unit shall comply with national safety standards to require relevant safety fire-fighting facilities and on-site safety warning signs, and the equipment and facilities used (including fire protection, electricity, equipment safety and labor protection measures) to ensure compliance with national fire protection standards, and regular inspections, maintenance, and upkeep at your own expense.

3. Responsibility for complying with the factory’s safety management regulations:

(1) The staff assigned to the factory shall have no bad deeds or criminal experience.

(2) Staff entering the factory should submit their list to the person in charge of the factory at least 2 days in advance, and the factory must apply for a factory pass before entering or exiting the service area.

(3) All personnel shall not bring cigarettes or fire into the factory production workshop and construction site.

(4) Staff entering the factory must comply with the relevant safety management regulations of the factory. It is strictly prohibited to enter Haier Group units after drinking. They shall not enter areas unrelated to work without permission. They shall not stay in the area when not working. Do not enter dangerous areas if you are doing risky work in violation of regulations.

(5) Vehicles entering the factory must drive safely in accordance with traffic rules and safety signs, and are not allowed to honk or speed.

(6) On-site construction safety responsibilities

(7) On-site construction includes equipment installation, repair, maintenance, processing, construction, repairs, etc. The construction site must be in accordance with the specifications determined by the factory Standard construction, equipped with full-time safety management personnel, responsible for the safety training of construction personnel, on-site safety inspections and supervision of construction safety measures throughout the entire process (8) The construction site must set up obvious safety warning signs and be equipped with sufficient fire emergency equipment. Keep fire safety passages clear.

(9) Safety qualifications such as equipment installation, repair, maintenance, and processing must meet the requirements of national safety standards. Special industry operations must have corresponding qualifications, and there must be no fraud or subcontracting to units without safety qualifications.

(10) If there are open flame operations, high-altitude operations, temporary electricity use, and flammable or explosive operations during on-site construction, a special operation permit must be obtained in advance. The construction site must be equipped with fire extinguishing equipment and safety warning signs must be posted. , set up dedicated personnel for safety supervision, distribute relevant work safety protective equipment, and clear the area around the site to remove flammable materials before construction operations can begin.

(11) At construction sites that have not been handed over to the factory for acceptance, a safety management agency or professional safety management personnel must be assigned to inspect and supervise the on-site safety construction in accordance with the "Construction Project Safety Production Management Regulations" , all safety measures at the construction site must be in place before construction can begin.

(12) Projects such as construction projects, decoration projects, and equipment and facility renovations must be carried out in accordance with the requirements of fire regulations before construction to ensure that the drawings are reviewed and approved by the fire department. Upon completion of the project, they must be approved by the fire department. It will be put into use after passing the inspection.

(13) During the trial operation of engineering projects and equipment facilities, the construction unit must arrange professional and technical personnel to monitor the operation on-site to facilitate accident emergency handling and fault repair and avoid safety hazards. Accidents happen.

IV. Vehicle transportation safety responsibilities:

(1) The transportation vehicle operating certificates must be complete and comply with national safety standards. Drivers must strictly follow road traffic safety regulations.

(2) The transportation and loading and unloading of hazardous chemicals transport vehicles must comply with national and industry requirements. Protection measures must be taken on site, and anti-static and other safety measures must be in place.

(3) Transport vehicles must be monitored on-site by dedicated personnel during loading, unloading or temporary storage, and overnight storage in the factory is prohibited.

5. Raw materials, parts, equipment, facilities, etc. must comply with national safety standards:

(1) Hazardous chemicals must provide technical specifications and ensure that they pass relevant safety certifications.

(2) All types of storage tanks used by the factory must have corresponding safety measures and undergo regular safety evaluations.

6. Property cleaning and greening:

Cleaning personnel have passed safety training and are equipped with safety protection measures in place. Personnel working at heights must undergo professional training and hold certificates to work.

7. The equipment, facilities, tools, etc. required to host large-scale events must comply with national safety requirements such as electricity, and the event site must comply with national fire safety requirements.

8. Other industries and services are strictly implemented in accordance with national, provincial, municipal, industry and other safety standards.

9. Safety liability compensation:

(1) If the projects contracted or undertaken or the products, services, projects, equipment and facilities provided due to quality reasons or violations of safety regulations and All fire safety and security accidents caused by industry safety standards will be borne by the unit itself.

(2) If the factory has any potential safety accidents caused by violation of safety regulations, it may notify the company to immediately stop the construction for rectification. All costs, losses and impacts incurred during the suspension of construction or business development will be borne by our unit. compensation.

(3) Safety accidents (including personal injury, fire insurance, theft, occupational hazards, food poisoning, traffic accidents, etc.) due to violation of safety management regulations or quality reasons of the products, services, projects, equipment, facilities, etc. provided accidents, etc.), in addition to our unit being responsible for all losses, any losses caused to the factory shall also be compensated.

(4) The factory’s acceptance of the products and services provided by our unit does not exempt our unit from its warranty liability. Losses caused to the factory due to undiscovered safety hazards will be dealt with according to the terms of the main contract.

10. Others

(1) If any dispute arises between the two parties due to the performance of the basic commitment letter of the contract, it can be resolved through negotiation first; if they are unwilling to negotiate or the negotiation fails, both parties agree to go to the people's court where the factory is located. Court litigation settled.

(2) Except for filling in the necessary contract signer, signatory, contract time or existing spaces, any alteration, deletion or addition to this safety responsibility letter will be invalid.

(3) This safety responsibility commitment letter shall take effect from the date of sealing or signature.

Unit name (seal):

Party A’s signature: ____________ Party B’s signature: __________

Date: _______ month _____ day, 20_______ year Date: ______month_____day, 20_______year;