Current location - Quotes Website - Personality signature - How to solve the kernel stack page fault
How to solve the kernel stack page fault
Solution To solve this problem, please use the following appropriate methods:

There is a virus in the boot sector

To determine whether the boot sector is infected with virus, please run the latest virus checker and clean the computer virus if necessary.

There is no virus in the boot sector.

Check the system log in Event Viewer for other error information to help determine the device that caused this error.

Incorrect word group. "Stop 0x77" error may be caused by wrong block in paging file or disk controller error; This error can also be caused when non-paged buffer pool resources are unavailable, but this is very rare.

If both the first and second parameters are 0, the stack signature cannot be found in the kernel stack. Damaged hardware can cause this problem. If the I/O status is C0000 185 and the paging file is located on a SCSI-based hard disk, you should check the disk cable and SCSI terminal.

If the I/O status code is 0xC000009C or 0xC0000 16A, it usually means that the data cannot be read from the disk due to the wrong block.

If this error message appears, you can restart your computer, and Autochk will automatically run and try to separate the bad sectors. If for some reason Autochk doesn't scan the hard disk for errors, please start ScanDisk manually. If the computer is formatted with NTFS file system, please run Chkdsk /f /r on the system partition. You must restart your computer before starting ScanDisk. If you can't start the computer because of this problem, please use the command console and run Chkdsk /r r r.

Damaged or unreliable random access memory (RAM) is another common cause of this problem.

Please check that all adapter cards in the computer are inserted correctly.

Ensure that all contacts of the adapter card are clean.

Disable the system cache in the BIOS to see if it can solve the problem.

If this does not solve the problem, your computer motherboard may have been damaged.