Outsourcing Security Agreement1* * Co., Ltd. hereinafter referred to as Party A;
Foreign company (personnel): hereinafter referred to as Party B. ..
Foreign companies (personnel) include: suppliers (subcontractors), construction teams, transportation and hoisting, foreign maintenance, labor services and other personnel.
In order to implement the safety production policy of "safety first, prevention first and comprehensive treatment", Party A shall clarify the safety production responsibilities of both parties in accordance with the provisions of the Safety Production Law to ensure safety. This agreement is hereby signed.
1. Project (work) Content: Supplier unloading and external maintenance.
2. Project (work) period: June 65438+1 October1to February 3 1.
Three. Agreement content:
1. Party A and Party B must conscientiously implement the National Law on Safety in Production and the regulations and documents of the competent department of safety in production in Jinan on safety in production and fire fighting; Strictly implement labor protection laws and standards.
2. According to the provisions of safety production laws and regulations, Party A requires Party B to clarify the safety operation rules of field personnel and emergency measures for accidents on the construction site.
3. During Party A's operation, Party B must strictly abide by Party A's rules and regulations on safety production, environmental protection, public security and fire control, such as the Code of Safety Production and the Management System of Safety Production, and accept Party A's supervision, inspection and guidance.
4. Party B shall be responsible for the labor protection articles of Party B's personnel during the operation; Party B shall urge on-site operators to wear protective equipment consciously.
5. The solid waste generated during the operation of Party B shall be stored in the designated place according to the regulations of Party A; Waste liquid shall not be poured into the sewer, and shall be collected and treated; Vehicles should prevent oil dripping.
6. When Party B climbs the mountain due to work needs, it must strictly abide by the safety operation regulations and the "Ten Prohibitions" regulations for aerial work; And coordinate with Party A's field personnel to prevent falling objects from hurting people.
7. Due to the need of work, Party B must hold a valid special operation certificate. When an open flame is used, it is necessary to go through the examination and approval of dangerous operations, strictly implement the "ten don't burn" regulations, implement fire prevention and gas protection measures, and designate special personnel for on-site monitoring.
8. Without permission, Party B's personnel shall not operate Party A's crane, machine tools and other equipment. Party B shall be responsible for the safety accidents (economic losses) caused by Party B's personnel violating Party A's various management rules and regulations and safety operation rules.
9. If Party B's personnel are killed or injured due to Party A's reasons, Party A shall implement it according to the national industrial injury treatment regulations; Party B assists in solving the problem.
10. When Party B's vehicle enters Party A's factory, it shall drive according to the speed limit sign of Party A's factory, and the traffic speed limit of the factory10 km/h; Curves, intersections, workshops and warehouses shall not exceed 5 km/h. ..
1 1, accident agreement:
Party B shall be responsible for reporting, investigating and handling any industrial accidents of Party B's personnel or injuries to others (including Party A's personnel) caused by Party B.. Party A may assist Party B to protect the site and rescue the wounded as appropriate.
12. Matters not covered in this agreement shall be handled in accordance with relevant state regulations.
13. This agreement is made in duplicate, with each party holding one copy.
Note: Fax is valid.
Signature of Party A (representative): Date:
* * * * Co., Ltd. (Seal)
Signature of Party B (representative): Date:
(Seal)
Chapter II of the Outsourcing Security Agreement: Contracting Unit (hereinafter referred to as Party A):
Contractor (hereinafter referred to as Party B):
I. Overview of the Project:
1. Project address: within (outside) the requirements ofNo. 15, Haitai Nanbei Street, Huayuan Industrial Zone, Tianjin.
2. Main contents of the project: factory maintenance, facility maintenance and overhaul construction projects.
Second, the project period:
From 20xx65438+1 October1to 20xx65438+February 3 1.
Three. Agreement content:
According to the national Safety Production Law and the relevant rules and regulations of Tianjin, in order to clarify the safety production responsibilities of both parties and ensure the construction safety. With the consent of both parties through equal consultation, both parties sign this agreement at the same time as the project contract, and both parties must strictly implement it. The specific terms are as follows:
Obligations and powers of Party A:
1. Introduce to Party B the working environment, production characteristics, technology, hazards, factory regulations and various safety systems of the contracted project, and assist Party B in safety education.
2. Provide necessary conditions for safe operation, and issue work tickets for hot work, ground breaking, gas use, water use, temporary electricity use, and entering containers according to the prescribed procedures.
3. Party A shall provide Party B with safe and reliable primary power supply facilities.
4. When Party A's safety inspectors find illegal acts and potential safety hazards at Party B's work site, they have the right to stop Party B and order Party B to stop work and make rectification. The losses caused thereby shall be borne by Party B. ..
5. Check the certificates of Party B's special operators and have the right to stop unlicensed operations.
6. According to the relevant provisions of the Factory Regulations and Factory Law, impose economic penalties on Party B's illegal acts.
7. After signing this contract, both parties confirm that there is no labor safety dispute before financial settlement.
Obligations of Party B:
1. Party B shall strictly abide by Party A's factory rules and regulations and various safety management systems, strictly implement Party A's working ticket system for special operations, issue working tickets according to the prescribed procedures before hot work, ground breaking, gas removal, water removal, temporary electricity utilization and container entry, and designate a special person to be responsible for on-site supervision.
2. Make a safety construction plan according to the project, and solicit opinions from Party A. ..
3. The machines and equipment meet the safety requirements, the safety accessories are complete and reliable, and Party A shall take the initiative to accept the inspection and verification.
4. On-site construction personnel should wear protective equipment that meets the requirements, and special operations personnel must hold relevant certificates.
5. Adhere to civilized construction, set warning signs in dangerous operation areas, and equip full-time safety inspectors to be responsible for the site.
6. Party B shall be responsible for any personal casualty accidents or casualties caused to Party A or a third party during the construction operation. If losses are caused to Party A or a third party, Party B shall be liable for compensation.
The above agreement shall come into force after being sealed by both parties on 20xx 65438+ 10/day, and both parties shall abide by it.
Party A's unit (outsourcing)
(official seal)
Signature of the person in charge of Party A:
time
Party B's unit (contractor) (official seal)
Signature of the person in charge of Party B:
time
Chapter III of Outsourcing Security Agreement Party A's Unit:
Party B's unit:
Signing place: Party A's company
Signing date: Project name: Project date:
In order to do a good job in safety production and prevent and reduce the occurrence of production safety accidents. According to Article 41 of the Law of People's Republic of China (PRC) on Work Safety, both parties have reached the following agreement on the management of work safety of Party B contracting Party A's engineering business at the place designated by Party A, and both parties shall abide by it (this agreement is an annex to this contract).
I. Rights and obligations of Party A:
1. Party A shall specify the safety production management system and safety operation rules and standards that Party B shall implement. ..
2. Party A has the right to supervise Party B's safety production management and site, and punish relevant personnel who violate Party A's safety rules and regulations or safety operation procedures.
3. Party A shall conduct safety education for new employees of Party B..
4. Party A has the obligation to provide Party B with safety consultation and emergency rescue.
Two. Rights and obligations of Party B:
1. Party B must abide by relevant national laws, regulations, safety standards and Party A's safety management system.
2. Party B shall formulate and implement various safety management systems and operating procedures according to its own reality, and report them to Party A for the record.
3. Party B has the responsibility to truthfully inform the on-site operators of the risk factors, preventive measures and emergency measures existing in the workplace and post.
4. Party B must correctly use the facilities, equipment and tools provided by Party A and check them regularly. Prohibit the use of facilities, equipment and tools with potential safety hazards.
5. Party B must take preventive measures to prevent occupational hazards, provide on-site operators with labor protection articles that meet national standards, and supervise and educate operators to use and wear them correctly.
6. Party B must be equipped with qualified production safety management personnel, strengthen on-site safety management, and shall not force workers to take risks and fatigue operations, and put an end to illegal command.
7. Party B shall educate and train the operators in production safety, and the operators who have not passed the education and training in production safety shall not be arranged to work at their posts; Special operations personnel must hold relevant certificates.
On duty; New employees of Party B must receive safety education from Party A. ..
8. The business license of Party B's company, the roster of all operators, personal resume and qualification certificate of special operators must be reported to Party A for the record, and the change of midway personnel should be reported to Party A for the record in time.
9. The personnel dispatched by Party B shall undergo physical examination before entering the factory, and report them to Party A for the record after passing the physical examination.
10. The personnel dispatched by Party B must take out work-related injury insurance and provide Party A with corresponding supporting documents.
1 1. The facilities, equipment and tools provided by Party B must meet the national safety standards.
12. Party B must set up obvious safety warning signs in the operation area and related facilities and equipment with dangerous factors.
13. Party B must obey Party A's requirements, do a good job of sorting and cleaning up, keep the site environment clean and tidy, and meet Party A's civilized production requirements.
14. Party B must obey the unified coordination and command of Party A to prevent possible crossover operation in the production process.
Three. Other agreed matters:
1. Either party shall immediately deal with the safety problems found during the performance of the agreement, notify the other party in time and make a written record.
2. Matters not covered in this agreement shall be implemented in accordance with national laws, local regulations and industry standards.
3. During the performance of this agreement, if Party B violates the terms of this agreement and causes consequences, Party B shall bear all responsibilities.
Responsibility; In case of major accident or serious impact on Party B, Party A has the right to terminate the cooperation contract, and all losses caused thereby shall be borne by Party B. ..
1. Party A may send personnel to participate in or supervise Party B's accident investigation. ..
2. If Party A and Party B cause injuries to the other party's personnel due to negligence, the responsible party shall bear the responsibilities.
3. During the performance of this agreement, if no consensus can be reached on civil liability, the local arbitration commission will make a ruling.
4. Public security incidents shall be handled in accordance with relevant laws and regulations on public security management.
The above-mentioned agreement shall come into effect after being signed and sealed by the principal responsible persons or legal authorized persons of both enterprises (the power of attorney is listed as an annex to this agreement), and shall naturally become invalid after all personnel and equipment of Party B are evacuated from Party A's business premises.
This agreement is made in duplicate, with Party A and Party B holding one copy respectively. ..
Party A: (Seal) Party B: (Seal)
Address: Address:
Representative: (signature) Representative: (signature)
Tel: Tel: