1. What should I do if the writing on the screen is blurry after reinstalling the computer system?

The blurry fonts on the display may be caused by our 1080P resolution being too high. You can try lowering the resolution. , if that doesn't work, you can do the following:

1 Open the "Font" window in the Control Panel, and in the left pane, click "Change Font Size".

2 In the left pane, click "Set custom text size (DPI means dots per inch. Generally, the more DPI, the better the display effect of the font.)", Then select the "Use Windows XP style DPI scaling" checkbox, drag the ruler to set a scaling ratio, and click "OK".

In addition, to improve readability, you can also adjust ClearType. ClearType font technology makes text on the screen almost as crisp and clear as text printed on paper.

2. What should I do if the computer display is unclear after reinstalling the system?

The computer display is unclear after reinstalling the system. This is mostly caused by incorrect graphics card drivers or incorrect desktop resolution settings. .

You can check in the Device Manager whether the graphics card driver is installed and whether the driver is correct. You can also directly use software such as Driver Wizard to update the graphics card driver.

After the graphics card driver is updated, restart the computer. Under normal circumstances, it will automatically default to the best resolution of the monitor, such as 1440X900 for 19-inch LCD, 1920X1080 for 21.5, 23, and 24 inches, etc.

If the resolution display is incorrect, the screen displayed on the computer may be blurry. At this time, you only need to change the desktop resolution to the standard optimal resolution.

3. What to do if the screen is blurry when the computer is turned on?

Is the blurred screen on startup related to your improper operation before shutting down? For example: playing games, watching videos, operating large things, using the computer for a long time caused by card? Or you downloaded something inappropriate, and the fault won't happen for no reason, right (if it's caused by this problem, just make sure your computer doesn't get stuck, have a blue screen, or suddenly shut down, and it won't be like this when you start it up)?

Press F8 immediately after booting up until the advanced options appear, then let go, select "Last Known Good Configuration" and press Enter to repair. If it still doesn't work, press F8 to enter safe mode and restore the system or reinstall the system (if reinstalling It's also a corrupted screen. It's recommended that you check it out. If you can enter safe mode, it means you have installed inappropriate things. Uninstall all the inappropriate things you downloaded before the accident, or restore the system or reinstall it. If your computer is Win8, enter You can't enter safe mode without breaking the system, you have to reinstall it).

If it is caused by hardware, take out the motherboard battery and let it go for a while, plug and unplug the memory, clean the graphics card, and check whether there is any problem with the hard disk. If it doesn't work, go get it repaired.

If it really doesn’t work, just reinstall the system. If you can’t reinstall it yourself, go to the maintenance center and ask someone to help you. If you can't turn it on by any means, it may be caused by a sudden shutdown, causing damage to the disk. One is to take out the motherboard battery and let it charge, the other is to leave it for a while and try to turn it on. If it still doesn't work, go get it repaired. .

One is to leave it for half a day or a day and sometimes it will recover on its own, and the other is to reinstall the system.

As long as you pay attention to your computer not to freeze, blue screen, or suddenly shut down, it will not be like this when you start it up.

4. The display on my computer is very blurry, what should I do?

I’m so depressed. I just typed a lot of things for you and accidentally closed the window. I’m so depressed~~ I’m here for you. Say it again.

The blurry display may be related to the aging of the display. Sometimes it is also related to the influence of the earth's magnetic field. You can try changing the position of the display, or resetting the resolution, or you can right-click on the desktop. , select Settings, click Advanced, select the monitor tab, select the screen refresh rate, generally 85 is better (if it is an LCD monitor, you do not need to consider this)

Regarding virtual memory, what are you doing? Right-click on my computer, select Properties, select Advanced, select Settings under Performance, click the Advanced tab, and then click Change under Virtual Memory. Finally, you can set your virtual memory yourself~~

I don’t know if it is helpful to you~~ I hope it is~~

5. The display is not clear after reinstalling the system on the computer

◆Hello◆

.

Download Driver Wizard or Driver Life, which will automatically help you download the corresponding driver when connected to the Internet. Just download and install it.

.

It is recommended to install a driver with Microsoft WHQL signature certification or official website driver, that is, install the driver recommended by Driver Wizard.

.

Microsoft's instructions on the driver: ① Driver Not digitally signed. This means that the driver has not passed Microsoft's Windows Hardware Quality Laboratory (WHQL) test. Installing a driver that is not digitally signed will cause the operating system to run unstable and even cause a blue screen of death. You can download it from Obtain WHQL-signed drivers from the manufacturer of the hardware device. ② A driver is a piece of software that allows your computer to communicate with the hardware or device. Without the correct driver, the hardware or device you want to use will not work properly.

.

If you think my answer is helpful to solve your problem, please click the button below my answer to select it as a satisfactory answer.

6. Why does the entire interface become very blurry after the computer system is reinstalled?

When the system is reinstalled, the screen becomes blurry, and the text and images displayed on the screen become very grainy and cannot be displayed. clear. What is displayed on the screen becomes difficult to accept. The user experience is extremely poor.

Open "Control Panel Home" and select "Appearance and Personalization"

Click "Adjust Screen Resolution" in the "Display" column

Single After clicking, the "Change Monitor Appearance" window will appear. In it, you should pay attention to whether there is a warning content "Your resolution is lower than 1024*768. Some items may not be displayed properly, and some applications may not be opened." If such a warning appears, you should change the screen resolution. .

Click the resolution option and adjust your resolution to a suitable position in the pop-up drop-down menu. Generally, select the recommended setting, as shown in the figure.

Click Apply after making your selections.

After clicking Apply, a prompt selection box will appear. Click "Keep Changes" as shown.

Finally click "OK". As shown in the picture.

At this time, you will find that your screen becomes clear and clear, without graininess. Congratulations, you have successfully set up a clearer screen.