Open the computer PS, edit the picture, and click Save As. After clicking Save As, save the type in JPEG format, and then click Save. After saving the JPG image, open AI and create a new document. After creating a new AI document, click Open in the file, select the opened image, and then click Image Description, and the image becomes a vector image. Tools/raw materials:

Fangzheng Yuefei

win7

psCS6

AI20 19

1. Turn on the PS on the computer. When you finish editing the picture, click Save As.

2. After clicking Save As, save the type in JPEG format, and then click Save.

3. After saving the JPG image, open AI and create a new document.

4.AI After creating a new document, click Open in the file.

5. Click Open, select an open picture, and then click Image Description.

6. After clicking the picture description, the picture becomes a vector picture.

How to convert ps brush into vector shape?

1, open Photoshop software, add the logo that needs to be used as a vector diagram, and copy the layer.

2. Observe the figure, starting from the outer circle. The outer ring is relatively regular. If you use "quick selection" and other methods, the effect is not good. We can use the "ellipse tool" to do this. Hold down the shift key to pull out a circle with the same size, then press CtrlT key to adjust the size of the outer circle, and then press OK key to apply the transformation.

3. Draw the inside of the circle. Note that the path operation is a new layer. One path corresponds to one floor. The manufacturing method is the same as the previous steps. When finished, press Enter to confirm.

4. The following is the internal avatar, which can be selected by "quick selection" to get the general shape. First, click on the background layer, select the appropriate pen tip size for quick selection, then switch to "Path" and click "Generate Working Path from Selection" below.

5. Press "Ctrl" to enlarge the image, and we find that the eyelash part is not selected well. At this point, we need to use the pen tool for fine-tuning. First, add an appropriate number of anchor points, and then use the direct selection tool to move the anchor points to the appropriate positions. The more anchor points you place, the better the effect of the selected area, and then fine-tune it with the deformation point tool.

6. Click the path panel to select the working path, then click Tools to bring up the upper left corner window, and then click the shape layer of the shape generation path. Copy one of the shape layers and paste the other two. Set the big circle as the bottom layer, the avatar as the top layer, and the avatar and the small circle as "Exclude overlapping shapes".

7. After completing the above steps, you can export the path. Click the Paths panel, and then click File → Export Illustrator Path to export the generated path to the folder of your choice. Subsequent editing can be done in ai or cdr.

How to make png format into vector diagram with ai?

The method of making png format into vector diagram with ai is as follows:

1. Open the PS software and open the png picture file: file-open-(select the path of picture storage-find the file-open).

This is a very important step. Enlarge the resolution of the picture, so that the path we extracted can be more in line with the original path: menu bar-picture-picture size-resolution position-I will change it to 500 (or 800, 1000) and then confirm.

3. This step is to select the path-the toolbar on the left-fourth-the magic wand tool (you can press the shortcut key W) to select the color-if there are multiple colors, just hold down the Shift key when the mouse is selected.

4. Convert Path: menu bar window-Path-Click the fourth tool under the Path dialog box (Generate working path from selection) to change the path from dotted line to solid line.

5. The last step is to export the AI format: file-export-path to Illustrator-save in file.

6. If you have CDR software, you can also open it with CDR software (CTRL+A- Select File-Right-click a colored box on the right to display the outline) and save it as a file in CDR format. Note: The greater the resolution, the better, and the smoother the lines.

How to convert projection into vector diagram?

You convert the image you want to process into a path file in PHOTOSHOP, that is, a path with an outline, and then save it. When you want to enlarge or reduce it, you can directly handle the size of the path and then convert it into a selection. You can add colors at will without affecting the image quality. This is a very simple method. You can try.

How to export PSD to vector?

Convert psd into AI vector diagram, the specific steps are as follows:

1. First, we need to open PHOTOSHOP.

2. Pull in the icon and convert it into an AI vector diagram.

3. At this time we choose the magic eraser tool.

4. Click on the white background, remove the white background, hold down the ctrl key, and click the layer thumbnail with the left mouse button.

5. Switch to Path, and then switch from Select to Path.

6. Now we need to generate the path.

7. Next, we export the path.

8. Now let's choose the working path first.

9. Keep it where you can find it.

10, now we can see the saved AI file on the desktop.

How to make a picture into a vector?

Open the picture material with PS, establish the selection that needs to be converted into vector diagram, right-click to turn it into a path (if the path is not standard, you can adjust it with tools such as a pen), and then select the export command under the PS start menu. The export format is AI format-OK! You can continue editing with AI. Only the shape and color of the picture can be drawn. Go to AI to adjust the method and suck the color of this picture with a straw. I want to bring it directly, but I still can't use this PS.