2. The date of issuance should be located at the end of the document, slightly below the right of the issuing unit. The posting date must indicate the full name of the date, such as 202 1 1.20, instead of just "11.20", so as not to find the specific time after many years. The release date requires the signature of the leader, which is generally based on the date of the leader's final issuance.
There are mainly the following formats:
1, letter format test, the top edge of the name of the issuing authority needs to be 30mm away from the top edge, it is best to use small standard font, and the font size is selected according to the regulations of the issuing authority. There will be a Wuwen line (thick on the top and thin on the bottom) 4mm below the full name of the issuing authority, and there will be a 20mm Wuwen line (thin on the top and thick on the bottom) below the distance. The length of these two lines is 170 mm, and each line needs to be in the middle, with 28 words. In addition, the name and double line of the issuing authority need to be printed in red.
2. Command format. The command format needs to be marked with "collar" or "command" after the name of the issuing authority, and it needs to be marked in small red font. The specific font size depends on the provisions of the issuing authority. The command indicates that the edge needs to be 20mm away from the upper edge of the plate, and the lower edge needs to leave two lines, with the command number marked in the middle. Two lines of marked text should be left below the command number, and four lines of marked signature name or seal should be left on the right side of the next line of text.
3. The format of meeting minutes shall be marked with "xxx Meeting Minutes", and the font size shall be determined by the issuing authority.