In engineering construction, the use of open flames must also comply with standards. Today we will learn about the approval system for the use of open flames on construction sites.
1. Level 1 Fire Approval System
In the fire-prohibited area: oil tanks, fuel tanks, tank trucks, containers that have stored flammable gas, flammable gas, and connected Auxiliary equipment; various pressure equipment; high-risk welding and cutting operations; hot work in relatively closed indoors, containers, basements and other places. The hot work department shall fill out the hot work application form, and the deputy project manager shall convene The project safety officer, construction director, welder, etc. will conduct on-site inspections. On the premise of implementing safety and fire prevention measures, the project deputy manager, welder, and project safety officer will sign the application form, and then submit it to the project fire prevention person in charge for review and report to the company. After review by the person in charge of fire prevention work of the company's safety department, the fire permit and fire safety technical measure plan should be submitted to the superior authority and the local fire department for review one week ago. Fire can only be started after approval.
2. Secondary fire approval system
Temporary welding and cutting and other hot work are carried out in fire-prohibited areas with certain risk factors, small fuel tanks and other containers, and climbing welding and cutting , during holidays and other hot work, the project construction leader must fill in the fire permit 4 days in advance and attach the safety technical measure plan. The deputy project manager summons the project safety officer, construction leader, welder, etc. to conduct on-site inspections. On the premise of implementing fire safety measures, the deputy project manager, welder, and project safety officer will sign the application form and submit it to the company's safety department for approval. Fire can only be started after approval.
3. Approval system for level three hot work
When hot work is carried out in a non-fixed place with no obvious risk factors, the person applying for the fire must fill in the fire application form. It was proposed three days ago. After the welder supervisor signs the opinion, it will be reported to the project fire prevention person in charge for review and approval before starting the fire.
I believe that after the above introduction, everyone has a certain understanding of the approval system for the use of open flames at construction sites. Welcome to log in to Zhongda Consulting for more relevant information.
For more information about engineering/service/purchasing tender document writing and production to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: /#/?source=bdzd