In fact, we don't need to make every frame repeatedly. We can just do the first and last one, and then make a dynamic picture by using the transition effect.
The following production process, production methods and production ideas are all learned from the Internet, and the original author can't be found, but the pictures are all made by themselves, so consider them original. Let's start with the tutorial. Look carefully!
end
Dynamic chart course
1
Step 1: Open the PS software, and click File-New in the software interface to open the following interface. The width and height can be set according to your own needs, and the background color can be absent or set to any color. When you have finished all the settings, click OK to create a new picture.
2
We select the text tool below the toolbar on the left, then press the left mouse button on the picture on the right, drag out a text area, and write the text. Here, I will give you an example of "Baidu experience, sharing makes life easier". Note here that the color of the text is changed by clicking on the top toolbar. My text color is not good. Finally, I select the text and click the color on it to change it.
three
Text input is complete. Let's go to the next step, create a new layer and add colors to this layer. The "motion" of my dynamic picture here is mainly presented in the change of color, not in the change of shape.
The way to create a new layer is to click the file icon in the lower right corner.
Create a new layer and add colors. Click the gradient icon in the toolbar on the left to open the interface as shown. Click the small triangle at the top and select the gradient mode. I chose atlas ribbon here. The effect of choosing different gradient modes is very different. In some advertisements, the text flashes from right to left, and the white to transparent mode is used. I won't say much here. You can try it yourself.
After selecting the mode, we use the mouse to pull out a line from left to right, and release the left button, and a rainbow effect will appear on the screen.
The dynamic effect we do is to keep the color of the text changing by chromatography. How did this change? The following are the key points:
Switch the mouse to the selection state and drag the picture to the far left.
In the next frame, let this picture move to the right bit by bit. Through the effect of the text mask, the color of the text shows the color of the corresponding picture part above the text, and the picture keeps moving, so the color of the text seems to be changing all the time.
Because frames are needed, the timeline is raised here, as shown in the figure. Click Window-Timeline, and a horizontal timeline will appear below the workspace.
Click the "New" button on the timeline to create a new second frame. As you can see, I have circled it forever. What does this mean? This refers to the number of times the picture is played in a loop, which means it is always played in a loop. Of course, you can also choose to play a few more times before stopping.
The second frame was created in the previous step. Select the second frame, and move the chromatogram to the right in the upper workspace to a suitable position. For example, move the chromatogram to the far right, exposing only the left edge. The picture below has a certain interference effect. Don't take my advice. You can put a position first, then add a transition and come back to adjust.
Here is to add a transition effect. Click the icon shown in the figure and set the corresponding number of transition frames. I tried it several times here and suggested more than 20 frames. If it is less, it will be too fast.
After the above steps are completed, the next key point comes again, creating a clipping mask.
Select the chromatographic layer, right-click it, and select Create Clipping Mask. At this time, the color of the text will become the color of the corresponding chromatographic part. Why didn't you create a clipping mask before? You may ask, this is to facilitate the adjustment of the chromatographic layer, because after setting this effect, the chromatographic chart will not be visible, which is not conducive to the previous operation of dragging the chromatographic chart.
Ok, you have finished this step. Click the play triangle arrow at the bottom to try the effect. If you are not satisfied, please go back to the adjustment and re-operate in step 9. If you feel good, click Save Dynamic Diagram, as shown in the figure, and click File-Save as web File.
Click Save in the following interface. After learning this operation, your interface operation of PS is basically no big problem. Try to change the effect quickly!