What if the tablet crashes? 1. What if the tablet crashes?
1. Forced shutdown
2. Power off method
3. End the process
1. If your tablet is in a dead state and it is useless to wake up any operation, then press and hold the power for 5 seconds and wait for the system to automatically cut off the power. This method is learned from the computer crash, mine is a small domestic brand, and it can be solved simply by this method. If yours doesn't work, it may be because the machine brand is different.
2. Don't be too anxious when the tablet computer crashes. The general waiting time is about 30 seconds. If there is no response after 300 seconds, please touch the screen by hand or press the back button. This will soon prompt the application not to respond, wait or close-just choose close.
At present, most computer batteries are built-in, but many are detachable. If no matter how much you toss them, there is still no response as usual, then I suggest you buckle the battery and wait for a minute before reinstalling it, provided that you can take it off.
2. What should I do if my tablet crashes?
The reason why the tablet computer crashed:
1, hardware problem (usually only personality explosion)
2. System problems (this is usually the case)
Solution:
Double erasure means clearing cache and memory data.
How to wipe the Android tablet? Shut down and enter recovery mode.
Generally, after the Android tablet is turned off, press and hold the volume "-"and the power button for 3 seconds at the same time to enter the recovery mode. It doesn't matter if you don't enter. Turn it off and come back.
Some tablets press and hold the volume "+"and the power button for 3 seconds at the same time to enter the recovery mode.
Some mobile phones are an exception. For example, Huawei emui should hold down the volume increase key, volume decrease key and power-on key at the same time, and release the power-off key after the mobile phone vibrates (the volume increase key and volume decrease key continue to be held down) before entering.
Different types of mobile phones have different access methods, please Baidu yourself.
After entering the recovery mode, there is a robot lying on the ground with its stomach open. At this time, press the main menu or house key to see the operation interface.
Although the access methods are different, the interface is similar.
Note that there are two lines after entering: Erase Data/Factory Reset Erase Cache Partition.
Some tablets are selected by the volume up and down, and the power button is determined.
Some tablets are selected by volume and confirmed by volume.
Some tablets have up and down volume selection, menu key confirmation,
Some tablets just touch and are in Chinese.
First, clear the data/return to the factory.
Move cursor to clear data/factory reset.
Then confirm the entry, see a lot of NO, one line is YES, move the cursor to the YES line, and then confirm.
In this way, the first liquidation of double liquidation is completed.
Wait a few minutes, and then a little longer. You will return to the recovery home screen.
Then enter wipe cache partition to clear the cache.
Then select Yes to confirm.
It's almost the same as the last step here, soon.
This completes the second step of double clearing.
At this point, all the double liquidation has been completed.
After the completion, you can turn off the machine directly and brush it at the back.
You can also select the first item in the first recovery screen.
Restart the system immediately.
This will restart, this time don't press anything to enter the Android system. If all the above methods fail, then go to the official website forum on your tablet and ask for a brush package. Brush machine can't solve it, but it has to be sent to maintenance and after-sales.
3. What should I do if my tablet crashes?
What crashes will occur during the use of tablet computers, and how to solve them? The summary is as follows: 1.
Always on, do not move 2 in the starting state. It has been stuck in the startup state.
Stay in the main interface. Boot crash in standby mode 5.
There are many reasons for crashing when shutting down: First, the battery is exhausted after not using the equipment for a long time. At this time, the tablet needs to be fully charged before starting the machine. Second, installing too many incompatible third-party software will cause software conflicts and easily get stuck and crash. It is recommended to uninstall some uncommon software.
Third, if you run too many programs, you'd better download a task manager and close the programs you don't need to run in time. The specific case analysis and solution (1) crashes as soon as WiFi is turned on, and crashes when WiFi is connected.
Cause: It will crash when connecting to WiFi. There may be a problem with address resolution. In the connection process, WiFi needs the system to resolve the IP address and establish hotspot docking. When the hardware can't handle it, it is easy to crash. In addition, the tablet in wifi hands crashes as soon as it is turned on, which may be a Rom problem. Rom can really improve the speed of address resolution, but some students brush Rom indiscriminately, which makes the WiFi module more likely to crash.
Suggestion: 1. Close some unnecessary applications before turning on WiFi. 2.WiFI crashes as soon as it is turned on. You can only wait patiently, and it will resume operation after a while.
When connecting, it crashes. Disconnect WiFi before connecting. 3. Restart the machine, or adjust the IP allocation address to automatic allocation.
(2) Crash when running the program. Cause: Opening several applications at the same time may cause the tablet to crash due to insufficient memory.
In the case of multi-task, satisfactory software running results can not be obtained. Moreover, some software will automatically empty the memory when exiting, and some software will occupy the memory after exiting. After opening several softwares, especially running them at the same time, it will increase the burden on the tablet computer, and it will crash because it takes up too much memory.
Suggestion: 1. Clear the cache in time.
2。 End the process with one click.
(3) Even the computer tablet crashed. Reason and solution: First, confirm whether the USB cable is broken or the interface is loose, and try to change a cable.
Secondly, insert the USB data cable into the USB interface on the back of the main chassis. The third is the drive of reloading the tablet.
Try pulling out four flat SD cards. Summary: Whether it is a domestic tablet or a foreign high-end tablet, the crash is an inevitable common phenomenon.
Most of the reasons for the crash of tablet computers are due to the installation of too many incompatible software. If it is determined that it is a crash, you can poke the reset key (Newman Q 10) or press and hold the power key 6- 10s (five-line MX 3G version). If it is a frequent crash, it can be improved by refreshing the firmware of the tablet.
4. What should I do if my tablet crashes?
The reason why the tablet computer crashed:
1, hardware problem (generally bad personality will encounter this situation after the explosion)
2. System problems (this is usually the case)
The solution of tablet computer crash;
1, hardware problem, no way out, call the manufacturer to contact maintenance matters!
2, system problems, the solution is as follows:
First, try to restart the computer. If you can do it, it is estimated that you won't come to read this article, so make sure the tablet has electricity first, and charge it first if it doesn't. In order to prevent accidents, friends who are afraid of crashing and can't turn on the machine will have to wait until the power alarm to recharge, so they should charge in advance. )
The most common solutions that fail to start after a crash are:
A, poke the reset hole (that is, the reset hole), find a toothpick, a ballpoint pen and the like, poke it into the reset hole of the flat body, and then try to turn it on. If it doesn't work, poke it again and try again (you can also try to press and hold the power button 10 second or more to see if it can be restarted, and some machines need to poke 10 second or more to start). If it doesn't work several times, try the following methods (or call the manufacturer)
B, brush the machine, brush the machine this problem is actually very simple, of course, you are afraid that you can't do it. It is no problem to go to the computer city and spend 50 yuan to find someone to brush it for you.
General brushing steps are as follows:
① Download the firmware package of the corresponding model from official website (no matter what brand of your tablet is, you should look for official website).
Under normal circumstances, after the firmware package is decompressed, there will be many files in it, including a tutorial on machine brushing. Just follow the tutorial. If you don't understand, call the manufacturer after-sales or ask other computer friends.
Note: each brand's brush method and brush firmware package cannot be universal. Don't use third-party software to brush the machine. Only officially provided software and methods can be used. It is recommended to brush the machine on WIN7 and XP computers, which makes it easier to install the driver. WIN8 brush machine needs to be forced to sign the driver first.
Analysis of the causes of tablet computer crash;
If you are very capable and lucky, and the tablet computer is saved by the above method, I believe you will be afraid of the situation that the machine can't be turned on again, then the tablet box will analyze some common reasons for the crash according to personal experience.
The most common reason is that some software is incompatible with the system, which leads to the system crash, or the files on the tablet computer are changed by themselves, or the software that should not be uninstalled is uninstalled.
This program is incompatible. When you find out what software you have installed, the tablet suddenly feels stuck. It is estimated that there is something wrong with that software. For details, please refer to the Possibility of Slow Card Running of Tablet PC: CPU Utilization 100% [with solution].
Indiscriminately changing flat files is usually a system configuration class. Under normal circumstances, you need root to modify the system file, but since you dare to modify this file, I believe it is not difficult for you to brush the machine. Throwing it away is not a crime.
Uninstall the software that should not be uninstalled, usually some English software that you don't know and don't think you can use. You also need root to uninstall these softwares. Can handle root, brush machine, healthier.