Letter of Commitment on Safety Management:
According to the Law of People's Republic of China (PRC) on Work Safety, as the person in charge of _ _ _ _ _ _ _, I am responsible for the safety management of this department. To achieve the department's safety management policies and objectives. Now solemnly promise:
First, fully understand the importance of safety work, always put safety management in the first place, keep in mind the safety production policy of "safety first, prevention first", consciously perform the safety responsibilities of this position, constantly enhance the sense of urgency, and strive to improve the safety management level of this department.
Second, strictly abide by national laws and regulations, adhere to the principle of "safety first, prevention first, combining prevention with control, and whoever is in charge is responsible", conscientiously implement the safety management responsibilities of personnel at all levels in the department, and gradually realize standardized safety management.
Third, formulate emergency plans for safety accidents, and establish an emergency system for safety accidents with consistent superior and subordinate, clear division of labor and mutual coordination to prevent all kinds of accidents.
4. I voluntarily accept the safety inspection and supervision of the company's safety Committee and safety management personnel, and consciously accept the company's safety management and assessment on the premise of not violating relevant national laws and regulations. Report to the safety committee or the superior leader immediately if you find hidden dangers of accidents or other unsafe factors.
Five, in the work, consciously abide by the laws and regulations of the state, consciously abide by the company's management system and the relevant provisions on keeping business secrets, conscientiously do all the work to prevent leaks.
Six, abide by the laws, regulations, rules and regulations of fire management, actively learn the knowledge of fire fighting and fire escape, familiar with the use of various fire equipment and escape routes, master the emergency measures of various accidents in this position, and deal with abnormal situations in time without delay.
Seven, actively participate in all kinds of safety training and safety learning, safety activities, accident emergency drills organized by the company, master the knowledge of safety production required for operation, improve safety production skills, and enhance the ability of accident prevention and emergency handling. Take various forms to educate the staff of this department on safety thoughts, professionalism and obeying the rules and laws, and firmly establish the idea of "safety first".
Eight, actively carry out the construction of safety culture in this department, and strive to create a harmonious safety production atmosphere, cultivate good work habits and safety values.
Nine, to perform other duties of production safety as prescribed by laws and regulations.
X. If an accident occurs due to violation of the above commitments and failure to perform safety production management duties, I voluntarily accept the corresponding punishment stipulated by the company and bear the corresponding legal consequences.
Commitment:
Date:
Letter of Commitment on Safety Management:
In order to further strengthen the management of Internet information security, cooperate with relevant government departments to do a good job in the inspection and rectification of Internet information content, and fully implement the work of national government departments to eliminate pornography and illegal publications and ICP filing, I or our company solemnly promise:
1. I or our company will strictly abide by national laws and regulations and will not engage in any illegal activities in the server-related business entrusted or rented by your company. Our company will strictly implement the provisions of the national industry management and information security management departments, so that the licenses, procedures and supervision are complete.
2. According to Articles 4, 7 and 8 of the Measures for the Administration of Internet Information Services, all operating IDC users of our company must obtain the ICP business license issued by the government communication industry management agency, and non-operating IDC users must declare to the government communication industry management agency.
Three. According to Article 12 of the Administrative Measures for Security Protection of Computer Information Network International Networking, we will clearly inform all business cooperation users of our company to pay attention to the following contents:
1. IDC users who have obtained ICP business license or relevant approval issued by government communication industry management agencies should pay attention to the validity period of the license and approval. If the relevant information registered is inconsistent with the actual situation or the legal status changes, it shall immediately go through the formalities for extension of examination at the original issuing department.
2. IDC users who are processing ICP business license and relevant approval documents (meaning that the government communication industry management department has received the relevant application and is processing it) should keep close contact with the ICP business acceptance department of your company and inform the relevant business personnel of our company in time.
3. Users who have held ICP business license but have not applied for ISP certificate should apply for ISP certificate /IDC certificate at Communications Administration as soon as possible according to relevant procedures.
4. I or our company promise that the rented or hosted servers, including offline user servers, do not include unrecorded websites, and interactive websites such as forums, blogs and guest books that have not been specially filed, strictly implement the principle of filing first and then accessing. Otherwise, I can shut down or stop providing corresponding access services to myself or our server or virtual host without refund.
5. I or my company will consciously abide by national laws and regulations and operate or cooperate with the website according to their own requirements.
Conduct comprehensive information security inspection and cleaning, and be responsible for the content and copyright of the software programs used. Ruoyin
All consequences (including but not limited to economic responsibility, administrative responsibility, legal responsibility, etc.). If the company (or I) fails to file the website in time due to poor supervision, or there are illegal websites and information on the server, it shall be borne by the company (or I) and has nothing to do with CLP Huatong Communication Co., Ltd. Chongqing Branch.
6. If I or our company fails to fulfill the contents of this letter of commitment, all legal consequences will be borne by our company, and our company can shut down or stop providing corresponding access services when necessary.
7. After signing this letter of commitment, I or our company will be responsible for accurately conveying the contents promised in this letter of commitment to the final hosting user, and collecting and saving the self-examination and self-correction forms of the end user, and summarizing and reporting them.
Commitment unit name:
Company seal (personal signature):
Date of signing:
Safety management commitment letter Fan Wensan:
Commitment: Cixi Taixing Electronic Engineering Co., Ltd.
We promise that during the construction, we will strictly abide by the Construction Law of People's Republic of China (PRC), the Law of People's Republic of China (PRC) on Safety in Production and the safety management regulations and rules of local construction projects, and earnestly implement the safety production policy of "safety first, prevention first".
Civilized construction shall be carried out in strict accordance with the Regulations on Comprehensive Management of Construction Project Safety Production and other departmental documents, and various safety protection measures shall be earnestly implemented to ensure safe production and civilized construction on the construction site. Strictly abide by the Labor Law of People's Republic of China (PRC) and relevant laws and regulations, establish and improve the labor safety and health system, and strictly implement the national labor safety and health regulations and standards to prevent accidents in the labor process. Sign labor contracts with construction workers, handle labor employment procedures, and purchase accident and medical insurance such as medical insurance, industrial injury insurance and accidental injury insurance for construction workers. Carry out necessary safety and civilization education for construction personnel entering the site, provide necessary labor safety protection articles, ensure the safety of the construction process and the personal safety of personnel, and be responsible for the safety of on-site construction personnel. In the process of engineering construction, the construction shall be carried out in accordance with the safety operation rules. All personnel entering the site must wear safety helmets, and safety belts must be used for aerial work. In case of violation of the above provisions, the promisor shall compensate the losses caused to the contractor, and the contractor has the right to terminate the contract in advance. If property losses and casualties are caused by the promisor's reasons or ineffective safety measures, the promisor shall bear the responsibility for the safety accident and the expenses arising therefrom.
I. Safety management
1. Establish and improve the safety production guarantee system and safety production responsibility system, and formulate safety production rules and regulations and operating procedures. Capital investment required to ensure the safe production conditions of the unit. Establish a safety production management organization, equipped with full-time safety production management personnel. Implement the project safety production inspection system, regularly carry out safety inspection on the project construction personnel and construction site, and make safety inspection records. Be responsible for the contractor and fully obey the contractor's safety management at the construction site.
2. We appointed Jiang Jun as the project leader to be fully responsible for the construction safety of this project. The safety responsibilities of the project leader mainly include: implementing the safety production responsibility system, safety production rules and regulations and operating procedures; Ensure the effective use of safety production expenses; According to the characteristics of the project, organize the formulation of safety construction measures to eliminate hidden dangers of safety accidents; Timely and truthfully report production safety accidents.
3. Wang Futao is the site safety officer, responsible for the realization of the project safety objectives. Full-time safety production management personnel
Safety responsibilities mainly include on-site supervision and inspection of production safety; If hidden dangers of safety accidents are found, it shall report to the project leader and the safety production management institution in a timely manner; Should immediately stop illegal command and operation.
Second, safety education
1. We will carry out safety technical disclosure before construction, classify it downwards, and finally implement it to operators.
2. Implement the safety production education and training system, regularly train the construction personnel, and make relevant records.
3. We will give three-level safety education to new construction workers (contract workers, temporary workers, employees seconded from other units, etc.). ) before construction and make relevant records.
4. We will regularly organize all construction personnel to carry out safety education and summarize the existing problems in safety. Make necessary disclosure on safety key points and matters needing attention, so that construction personnel can know fairly well and form a solid safety awareness.
5. Before new technology, new technology, new equipment, new materials and new products are put into production, special education and training should be given to post operators and related personnel according to the new operating procedures before independent operation can be carried out.
Third, safety protection.
1. Implement civilized construction requirements, promote modern management science, organize construction scientifically, and do a good job in construction site management; Abide by the relevant management regulations of engineering construction safety production, organize construction in strict accordance with safety standards, accept the supervision and inspection carried out by industry safety inspectors according to law at any time, and take necessary safety protection measures to eliminate hidden dangers of accidents. The responsibility for safety accidents caused by our reasons and the expenses arising therefrom shall be borne by us.
2. Strictly implement the national laws and regulations on safety production and labor protection, establish the responsibility system for safety production, strengthen standardized management, conduct safety disclosure, safety education and safety publicity, and strictly implement the safety technical scheme.
3. Formulate safety protection measures for construction site and construction electricity; On-site mechanical equipment safety protection; Measures for safe use of construction machines and tools; Safety protection of construction personnel; On-site fire prevention, windproof and other safety measures.
Regularly inspect and maintain various safety facilities and labor protection devices on the construction site, eliminate potential safety hazards in time, and ensure safety and effectiveness.
Consciously abide by and implement the construction safety inspection standards and related specifications of the Ministry of Construction; Consciously abide by the local government's regulations on safe construction and the laws, regulations, norms, standards and regulations on safe production promulgated and implemented by the competent department of industry, actively participate in various activities related to promoting safe production, and effectively protect the safety and health of construction personnel.
Respect and obey the existing rules, regulations and management methods related to production safety, strengthen their own management in accordance with the relevant provisions of the contract, and perform their duties and obligations. Organize all construction personnel to carry out safety education on a regular basis, summarize the existing problems in safety, and make necessary disclosure on safety key points and precautions, so that construction personnel can know fairly well and form a solid safety awareness.
Before new technology, new technology, new equipment, new materials and new products are put into production, special education and training should be given to post operators and related personnel according to the new operating procedures before independent operation can be carried out. All kinds of construction personnel must receive safety education and training before entering the construction site.
Second, the temporary electricity consumption
1. The installation and use of power lines and facilities on the construction site must conform to the installation specifications and safety operation procedures, and be erected according to the construction organization design. It is forbidden to pull wires and connect electricity at will. The construction site must be equipped with night lighting to ensure the construction safety requirements; Lighting and hand-held lighting lamps in dangerous and humid places must use voltages that meet safety requirements.
2. Where temporary lines need to be installed and used, the application for examination and approval shall be handled with the contractor's on-site project manager before installation. Without the approval form, it shall not be installed without authorization. Those who install it without authorization will bear the consequences.
3. The manager of temporary electrical equipment shall be responsible for the safety management during use, and do a good job in stopping, sending electricity, repairing damaged equipment, and reporting for dismantling when due.
4. The use time of temporary power lines is generally not more than 7 days, and the longest is not more than 3 months. Temporary power lines that have been used for more than 3 months shall be installed according to conventional power lines.
Three, the construction site hot work examination and approval system
1. The examination and approval system must be implemented for hot work on the construction site.
2. Hot work can only be carried out after the hot work application form is filled in and reported to the contractor's on-site project manager for approval.
3. The application form for hot work shall specify the place where the fire is used, the equipped fire-fighting equipment, the operating personnel, the guardian and the effective time, and keep the stub for future reference.
4. The operator must operate in strict accordance with the provisions of the fire certificate, and shall not change the operation content without authorization. If there is any change, you should re-apply for a fire permit.
5. The fire certificate is valid on the same day. After the work is completed, the operator returns it to the contractor's on-site project manager and reprocesses the operation.
Four, mechanical safety:
1. Before construction, the construction machinery, instruments and safety protection facilities shall be inspected to ensure compliance with safety regulations, and the inspection period shall not exceed.
2. Construction personnel should carefully check the construction area, working environment, operating facilities, equipment, tools, etc. Stop the construction immediately if any hidden danger is found, and continue the construction only after the rectification is implemented.
3. All kinds of equipment and construction tools used in the construction should meet the construction requirements. Before starting work every day, the scaffolding on the construction site will be inspected by special personnel, and the hidden dangers will be rectified in time. All kinds of safety protection facilities, fences, safety signs, warning signs and grounding wires are guaranteed not to be dismantled or changed without authorization.
Fifth, fire prevention.
1. We will establish and implement the fire prevention management system on the construction site in strict accordance with the provisions of the Fire Protection Regulations of People's Republic of China (PRC), set up fire protection facilities that meet the fire protection requirements, and keep them in a good standby state. When constructing, storing and using flammable and explosive equipment in fire-prone areas, special fire safety measures should be taken and relevant procedures should be handled at local authorities.
2. Fireworks are strictly prohibited in key fire prevention areas, and the explosion-proof performance of electrical facilities used in parts with explosion-proof requirements should be good. It is strictly forbidden to connect temporary power without permission. The use and installation of electrical products, the design and laying of pipelines must conform to the relevant national fire safety technical specifications.
3. All units and departments that need to use open flames in key fire prevention parts and their surroundings shall submit an application report for hot work in advance, which can be used or constructed only after being audited by the project department and approved by the project manager.
4. Any construction personnel shall not move, damage, misappropriate, dismantle or stop using fire control facilities and equipment. Do not bury the pressure ring to occupy the fire hydrant, occupy the fire spacing or block the fire escape.
5. Strengthen the safety and fire prevention education and management of construction workers, migrant workers and outsiders.
6. The specific fire control requirements of the construction site and dangerous places shall be implemented in accordance with the specific requirements specified in the engineering safety and civilized technology.
On-site management of intransitive verbs: take measures such as maintaining safety, preventing danger and preventing fire at the construction site; Conditional, should be closed to the construction site management. If the construction site may cause damage to adjacent buildings, structures and special working environment, safety protection measures shall be taken.
Strictly implement the national fire safety technical specifications and relevant laws and regulations, protect fire control facilities, prevent fires, report fires, and actively participate in organized fire fighting work. Conduct regular safety and fire prevention education for construction personnel, organize fire prevention inspection, and nip in the bud.
Carry out the safety management of special equipment according to the national General Rules for Safety and Hygiene Design of Production Equipment and relevant professional technical standards.
According to the requirements of Code for Design of Fire Extinguishers in Buildings (GBJ 140-90), warehouses should be equipped and fire safety inspections should be carried out frequently. Effective measures must be taken in time to eliminate fire hazards. The warehouse must meet the fire protection requirements. Smoking, naked flames and household appliances are strictly prohibited. Accommodation is strictly prohibited in the warehouse.
According to the Law of People's Republic of China (PRC) on Work Safety and the Regulations on Work Safety Management of Construction Projects (Order No.393rd of the State Council), the management of work safety is strictly implemented in accordance with relevant requirements and standards. The safety management of the construction site should be implemented to all people, and the safety measures such as material stacking, garbage cleaning, fire and electricity use, explosion prevention and fire prevention at the construction site must be strictly implemented in accordance with the relevant national standards. Temporary power lines, dangerous operations, on-site hot work and crossover operations on the construction site shall be approved by the project department in advance as required. If the grade is higher, the project department shall report it to the higher authorities for approval before construction. Without approval, construction is prohibited.
Seven, dangerous operations
1. The dangerous operation submitted for approval should be an operation that is not common in construction and needs to be solved urgently. Before carrying out dangerous operations, fill in the "Application Form for Dangerous Operations" and report it to the contractor's on-site project manager for approval.
2. If you need to go through the examination and approval procedures, you should go through the examination and approval procedures in advance. Do not go through the examination and approval procedures, and are prohibited from taking up their posts.
3. People with contraindications, physical defects, poor labor discipline, drinking and poor mental state are not allowed to directly engage in dangerous operations.
4. After the application for dangerous operation is approved, the operation can only be carried out after the dangerous operation instruction is issued. Operators have the right to refuse dangerous operations without formal work instructions.
5. Before the operation, according to the operation content and possible accidents, carry out safety education for all dangerous operators and implement safety measures.
6. The equipment and facilities used in dangerous operations must meet the national safety standards and regulations, and the tools, raw materials and labor protection articles used in dangerous operations must meet the national safety standards and regulations. Fully equipped, reasonable in use, safe and reliable.
7. In the process of dangerous operation, a person with serious and responsible work, strong sense of responsibility, strong safety awareness and rich practical experience should be appointed as the safety director, responsible for on-site safety supervision and inspection.
Eight, material management
1. Construction machinery shall be set according to the position and line specified in the general layout of construction, and the roads in the field shall not be occupied at will. Construction machinery entering the site must go through safety inspection and can only be used after passing the inspection. Construction machinery operators must establish a unit responsibility system, and hold relevant certificates according to relevant regulations, and unlicensed personnel are prohibited from operating.
2. Warehouses or stockyards should be stacked separately or in isolation according to the types of materials or equipment.
3. Lighting used in warehouses or stacking places should keep at least a certain safe distance from combustible materials.
4. It is forbidden to use iodine tungsten lamp in the warehouse to prevent electrical fire-fighting equipment from catching fire.
5. Electrical equipment in warehouses or stockyards should be inspected, maintained and managed regularly.
6. For the stored items, fire safety inspection should be carried out frequently, and effective measures must be taken in time to eliminate fire hazards.
7. The electrical equipment used in the warehouse must meet the requirements of fire prevention, and the warehouse should be equipped with ventilation devices and fire warning signs.
8. Smoking, naked flames, household appliances and accommodation are strictly prohibited in the warehouse.
Nine, special equipment safety management system
1. Safety accessories or safety devices must be complete and reliable, and conform to relevant technical specifications. All kinds of safety accessories or safety devices should be checked regularly to ensure normal use, and no one can dismantle them without permission.
2. To pay attention to the safety management in the use of equipment, it is necessary to establish post responsibility system, safety operation rules, maintenance system and succession system, designate professional technicians to be responsible for the technical management of special equipment, and do a good job in operation management, maintenance and regular maintenance to ensure the safe and normal operation of equipment.
3. Operators must be at least 18 years old, in good health, with no contraindications and strong sense of responsibility. Operators of special equipment must hold training certificates of relevant departments and review them regularly according to regulations.
4. The safety management of motor vehicles used in the project should strictly implement the relevant national laws and regulations, implement the Road Traffic Law, and implement the motor vehicle insurance and annual inspection system to ensure safe driving.
X. Environmental protection
1. Abide by national laws and regulations on environmental protection and take measures to control the pollution and harm of dust, waste gas, waste water, solid waste, noise and vibration on the construction site.
2. The following measures should be taken to prevent environmental pollution:
2. 1. Properly treat the muddy water, and it shall not be directly discharged into urban drainage facilities or rivers without treatment;
2.2. Except for devices that meet the requirements, it is not allowed to melt asphalt or burn substances such as linoleum and paint that will produce toxic and harmful smoke and malodorous gas after combustion at the construction site;
2.3. Use sealed barrels or take other measures to deal with high-altitude wastes;
2.4. Take effective measures to control dust in the construction process;
2.5. It is forbidden to use toxic and hazardous wastes as earthwork backfill;
2.6. Effective control measures should be taken for construction machinery that produces noise and vibration to reduce noise hazards.
3. Should do a good job in the safety of the construction site, take necessary anti-theft measures, and set up enclosure facilities around the site. If the construction site is in the urban area, a shelter fence should be set around it, and the scaffolding facing the street should also be equipped with corresponding enclosure facilities. Non-construction personnel are not allowed to enter the construction site without authorization.
4. In the mouth of the cave, near the border, aerial work, power equipment, transmission lines, underground pipelines, inflammable and explosive areas and traffic arteries along the street, the construction shall be carried out in accordance with the Manual for Safe Operation of Building Construction. Safety protection measures should be taken before construction and implemented after approved by the supervisor.
5. The roads on the construction site are smooth and the drainage system is good; Keep the site clean and tidy, and clean up the construction waste at any time. In the construction of vehicles and pedestrians, ditches, pits, hole covers and construction signs should be set up.
6. Due to technical and economic constraints, the environmental pollution of the construction project cannot be controlled within the prescribed scope, and it shall be reported to the construction administrative department and the environmental administrative department of the local people's government for approval together with the contractor in advance.
XI。 sanitation
1. During the construction period, all machinery, tools, materials and construction wastes shall be sorted out in time so as to be cleaned up after the construction. It is forbidden to throw excess materials and construction waste directly from the sky. When the above items are not needed, they shall be cleared out of the construction site according to the requirements of the contractor.
2. Strictly abide by the regulations of the local government and relevant departments, and go through the formalities of examination, approval and filing of traffic, noise, environmental sanitation and off-site pollution on the construction site. All expenses and fines arising from non-compliance shall be borne by us.
3. The construction site should provide all necessary living facilities for employees and meet the requirements of hygiene, ventilation and lighting. Workers' diet and drinking water supply should meet the hygiene requirements.
Twelve. civilized construction
1. Strictly abide by the norms and regulations on safe and civilized construction promulgated by the state and local governments, and abide by the contractor's site management regulations.
2. All on-site construction personnel should wear work cards. Site construction waste should be cleaned up daily.
Thirteen. others
1. Employment shall be carried out in accordance with the Labor Law of People's Republic of China (PRC) and other laws, regulations and rules, and it is forbidden to use underage workers and personnel with occupational taboos for construction work.
2. Implement the Operating Rules for Safe Construction of Construction Projects in the Location of Construction Projects and relevant regulations of the contractor and the state.
3. Handling of major accidents in engineering construction on the construction site shall be carried out in accordance with the Regulations on Reporting and Investigation Procedures for Major Accidents in Engineering Construction.
4. In case of heavy casualties and other safety accidents, it shall immediately report to the relevant departments, and notify the contractor and supervisor in accordance with relevant regulations, and handle them according to the requirements of relevant government departments, and the expenses incurred shall be borne by the responsible party of the accident.
5. If we fail to meet the requirements for three consecutive times (including three times), the contractor has the right to ask the promisee to pay 65,438+00% of the contract amount for the project construction and maintenance; If the liquidated damages are insufficient to compensate the losses of the contractor, it shall continue to compensate the losses of the contractor. For those who refuse to pay liquidated damages, the contractor has the right to terminate the contract, order them to leave, and investigate all their losses.
6. If we violate this safety management commitment and cause losses to the contractor, we will be responsible for compensation.
7. This safety management commitment is a supplement to the project construction and maintenance contract; If there is any conflict between the two clauses, the provisions of the engineering construction and maintenance contract shall prevail.
Name of undertaker: official seal:
Signature of representative: date of signature: